* bitbake fsl-image-test failed
@ 2013-04-01 14:32 Steven Grunza
2013-04-01 15:10 ` Daiane Angolini
2013-04-01 15:33 ` Otavio Salvador
0 siblings, 2 replies; 4+ messages in thread
From: Steven Grunza @ 2013-04-01 14:32 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 5064 bytes --]
Has anyone tried to follow the instructions in
https://community.freescale.com/docs/DOC-93844 called "How to test yocto
for imx6" using 64-bit Ubuntu Quantal?
My quad sabre-lite board should be here today and I'm trying to get
started with building the OS. Sorry if this is a typical newbie issue
but I'm kind of new building complete distributions. I would much
rather spend my time working on my application but my experience with
eval boards has been that the SD card that is supposed to be included
isn't and the company that sells the eval kit doesn't care once the sale
has been made. :(
My build failed with the following info:
| ERROR: Function failed: do_compile (see
/home/yocto/rootfs_builder/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/gcc-cross-initial-4.7.2-r13/temp/log.do_compile.17913
for further information)
ERROR: Task 506
(/home/yocto/rootfs_builder/sources/poky/meta/recipes-devtools/gcc/gcc-cross-initial_4.7.bb,
do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 300 tasks of which 63 didn't need to be
rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
/home/yocto/rootfs_builder/sources/poky/meta/recipes-devtools/gcc/gcc-cross-initial_4.7.bb,
do_compile
Summary: There were 2 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
grunzasr@stm32dbg:/home/yocto/rootfs_builder/build$
grunzasr@stm32dbg:/home/yocto/rootfs_builder/build$ uname -a
Linux stm32dbg 3.5.0-25-generic #39-Ubuntu SMP Mon Feb 25 18:26:58 UTC
2013 x86_64 x86_64 x86_64 GNU/Linux
grunzasr@stm32dbg:/home/yocto/rootfs_builder/build$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"
grunzasr@stm32dbg:/home/yocto/rootfs_builder/build$ more
/home/yocto/rootfs_builder/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/gcc-cross-initial-4.7.2-r13/temp/log.do_compile.17913
DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
'bit-64', 'x86_64-linux', 'common']
DEBUG: Executing shell function do_compile
NOTE: make -j 2 ARCH_FLAGS_FOR_TARGET= -march=armv7-a -mthumb-interwork
-mfloat-abi=softfp -mfpu=neon -mtune=cortex-a9
-isystem/home/yocto/rootfs_builder
/build/tmp/sysroots/imx6qsabrelite/usr/include all-gcc all-target-libgcc
mkdir -p -- ./intl
mkdir -p -- ./libiberty
Configuring in ./intl
Configuring in ./libiberty
configure: creating cache ./config.cache
configure: creating cache ./config.cache
checking whether to enable maintainer-specific portions of Makefiles... no
checking for makeinfo... checking whether make sets $(MAKE)... makeinfo
checking for perl... perl
yes
[snip]
/bin/sh
/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/mkconfig.sh
bconfig.h
gcc -c
-isystem/home/yocto/rootfs_builder/build/tmp/sysroots/x86_64-linux/usr/include
-O2 -pipe -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -W -Wall -Wno-narrowi
ng -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-format-attribute -pedantic -Wno-long-long -Wno-variadic-macros
-Wno-overlen
gth-strings -Wold-style-definition -Wc++-compat -DHAVE_CONFIG_H
-DGENERATOR_FILE -I. -Ibuild
-I/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r
13/gcc-4.7.2/gcc
-I/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/build
-I/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-
4.7.2-r13/gcc-4.7.2/gcc/../include
-I/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/../libcpp/include
-I/home/yocto/rootfs_bui
lder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/../libdecnumber
-I/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/../libd
ecnumber/dpd -I../libdecnumber \
-DBASEVER="\"4.7.2\"" -DDATESTAMP="\"\"" \
-DREVISION="\"\"" \
-DDEVPHASE="\"\"" -DPKGVERSION="\"(GCC) \"" \
-DBUGURL="\"<http://gcc.gnu.org/bugs.html>\"" -o
build/version.o
/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/version
.c
/home/yocto/rootfs_builder/build/tmp/sysroots/x86_64-linux/usr/bin/armv7a-vfp-neon-poky-linux-gnueabi/arm-poky-linux-gnueabi-as:
unrecognized option '--64'
make[1]: *** [build/version.o] Error 1
make[1]: *** Waiting for unfinished jobs....
/bin/sh
/home/yocto/rootfs_builder/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/gcc/../move-if-change
tmp-optionlist optionlist
echo timestamp > s-options
make[1]: Leaving directory
`/home/yocto/rootfs_builder/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/gcc-cross-initial-4.7.2-r13/gcc-4.7.2/build.x86_64-l
inux.arm-poky-linux-gnueabi/gcc'
make: *** [all-gcc] Error 2
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (see
/home/yocto/rootfs_builder/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/gcc-cross-initial-4.7.2-r13/temp/log.do_
compile.17913 for further information)
[-- Attachment #2: Type: text/html, Size: 6831 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: bitbake fsl-image-test failed
2013-04-01 14:32 bitbake fsl-image-test failed Steven Grunza
@ 2013-04-01 15:10 ` Daiane Angolini
2013-04-01 15:33 ` Otavio Salvador
1 sibling, 0 replies; 4+ messages in thread
From: Daiane Angolini @ 2013-04-01 15:10 UTC (permalink / raw)
To: Steven Grunza; +Cc: meta-freescale
On 04/01/2013 11:32 AM, Steven Grunza wrote:
> Has anyone tried to follow the instructions in
> https://community.freescale.com/docs/DOC-93844 called "How to test yocto
> for imx6" using 64-bit Ubuntu Quantal?
I've been using 12.10 64-bits for a while without any problem so far
Please, use danny branch instead of master:
./repo init -b danny
And try again.
And I would say to you start using core-image-minimal only to make sure
your build environment is OK
Daiane
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: bitbake fsl-image-test failed
2013-04-01 14:32 bitbake fsl-image-test failed Steven Grunza
2013-04-01 15:10 ` Daiane Angolini
@ 2013-04-01 15:33 ` Otavio Salvador
2013-04-01 18:14 ` bitbake fsl-image-gui fail Carrillodominguez Francisco Alberto-B35153
1 sibling, 1 reply; 4+ messages in thread
From: Otavio Salvador @ 2013-04-01 15:33 UTC (permalink / raw)
To: Steven Grunza; +Cc: meta-freescale@yoctoproject.org
On Mon, Apr 1, 2013 at 11:32 AM, Steven Grunza <steven.grunza@gmail.com> wrote:
> Has anyone tried to follow the instructions in
> https://community.freescale.com/docs/DOC-93844 called "How to test yocto for
> imx6" using 64-bit Ubuntu Quantal?
It should work fine however Yocto's master is having some heavy
changes for upcoming 1.4 release and it may break from time to time.
I'd suggest to you to remove your 'tmp' dir (inside of your build-dir)
and try to rebuild it doing a 'repo sync' and check if it works. For
now, the safest route is to stay at 'danny' as 'master' is a moving
target.
> My quad sabre-lite board should be here today and I'm trying to get started
> with building the OS. Sorry if this is a typical newbie issue but I'm kind
> of new building complete distributions. I would much rather spend my time
> working on my application but my experience with eval boards has been that
> the SD card that is supposed to be included isn't and the company that sells
> the eval kit doesn't care once the sale has been made. :(
Yes; this happens sometimes. However board should work just fine with
the BSP we have here integrated so it should be more smooth :-)
--
Otavio Salvador O.S. Systems
E-mail: otavio@ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
^ permalink raw reply [flat|nested] 4+ messages in thread
* bitbake fsl-image-gui fail
2013-04-01 15:33 ` Otavio Salvador
@ 2013-04-01 18:14 ` Carrillodominguez Francisco Alberto-B35153
0 siblings, 0 replies; 4+ messages in thread
From: Carrillodominguez Francisco Alberto-B35153 @ 2013-04-01 18:14 UTC (permalink / raw)
To: meta-freescale@yoctoproject.org
Hello Yocto masters!
I tried today to compile my fsl-image-gui, I had compiled before other image that did not have gui. So today I tried:
* repo sync
* bitbake fsl-image-sync
And I get this error when compiling libsoup:
| arm-poky-linux-gnueabi-libtool: link: arm-poky-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a9 --sysroot=/home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd -O2 -pipe -g -feliminate-unused-debug-types -Wall -Wstrict-prototypes -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=pointer-arith -Werror=init-self -Werror=format=2 -Werror=missing-include-dirs -Werror=aggregate-return -Werror=declaration-after-statement -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/range-test range-test.o test-utils.o ../libsoup/.libs/libsoup-2.4.so /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libxml2.so -lm /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libgio-2.0.so /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libgmodule-2.0.so -ldl -lz -lresolv /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libgobject-2.0.so /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libgthread-2.0.so /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libffi.so /home/b35153/yocto/fsl-community-bsp/build/tmp/sysroots/imx6qsabresd/usr/lib/libglib-2.0.so -lpthread -lrt
| range-test.o: In function `main':
| /home/b35153/yocto/fsl-community-bsp/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libsoup-2.4-2.38.1-r1/libsoup-2.38.1/tests/range-test.c:351: undefined reference to `apache_init'
| collect2: error: ld returned 1 exit status
| make[2]: *** [range-test] Error 1
| make[2]: Leaving directory `/home/b35153/yocto/fsl-community-bsp/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libsoup-2.4-2.38.1-r1/libsoup-2.38.1/tests'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/home/b35153/yocto/fsl-community-bsp/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libsoup-2.4-2.38.1-r1/libsoup-2.38.1'
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see /home/b35153/yocto/fsl-community-bsp/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/libsoup-2.4-2.38.1-r1/temp/log.do_compile.9057 for further information)
ERROR: Task 5034 (/home/b35153/yocto/fsl-community-bsp/sources/poky/meta/recipes-support/libsoup/libsoup-2.4_2.38.1.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2719 tasks of which 2713 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:
Summary: 1 task failed:
Is this failing something known, or just that I should create a complete new folder and do everything from scratch instead of building on top of an old build.
Francisco C.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-04-01 18:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-01 14:32 bitbake fsl-image-test failed Steven Grunza
2013-04-01 15:10 ` Daiane Angolini
2013-04-01 15:33 ` Otavio Salvador
2013-04-01 18:14 ` bitbake fsl-image-gui fail Carrillodominguez Francisco Alberto-B35153
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.