From: nsekhar@ti.com (Sekhar Nori)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.
Date: Tue, 2 Apr 2013 14:05:09 +0530 [thread overview]
Message-ID: <515A983D.8040907@ti.com> (raw)
In-Reply-To: <1364197789-16783-1-git-send-email-avinashphilip@ti.com>
On 3/25/2013 1:19 PM, Philip Avinash wrote:
> Add platform support for EHRPWM and ECAP by providing clock nodes and
> device tree nodes.
> This series depends on [1] and [2] and is available for testing at [3].
> Tested for back light support in da850 EVM with EHRPWM PWM device.
>
> [1] http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2
> [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next
> [3] https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm
>
> Note:
> DT support for EHRPWM backlight has not been added in da850-evm.dts as there is
> conflicting pin-mux requirement with SPI flash.
Can you check if this is really true even in newer boards (have a look
at the latest schematics)? I remember this used to be a problem in very
early versions but was fixed later.
Thanks,
Sekhar
WARNING: multiple messages have this Message-ID (diff)
From: Sekhar Nori <nsekhar@ti.com>
To: Philip Avinash <avinashphilip@ti.com>
Cc: <linux@arm.linux.org.uk>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<davinci-linux-open-source@linux.davincidsp.com>,
<prakash.pm@ti.com>, <jacmet@sunsite.dk>
Subject: Re: [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI.
Date: Tue, 2 Apr 2013 14:05:09 +0530 [thread overview]
Message-ID: <515A983D.8040907@ti.com> (raw)
In-Reply-To: <1364197789-16783-1-git-send-email-avinashphilip@ti.com>
On 3/25/2013 1:19 PM, Philip Avinash wrote:
> Add platform support for EHRPWM and ECAP by providing clock nodes and
> device tree nodes.
> This series depends on [1] and [2] and is available for testing at [3].
> Tested for back light support in da850 EVM with EHRPWM PWM device.
>
> [1] http://gitorious.org/linux-davinci/linux-davinci/trees/davinci-for-v3.9/dt-2
> [2] https://gitorious.org/linux-pwm/linux-pwm/trees/for-next
> [3] https://github.com/avinashphilip/am335x_linux/tree/davinci-for-v3.9_soc_pwm
>
> Note:
> DT support for EHRPWM backlight has not been added in da850-evm.dts as there is
> conflicting pin-mux requirement with SPI flash.
Can you check if this is really true even in newer boards (have a look
at the latest schematics)? I remember this used to be a problem in very
early versions but was fixed later.
Thanks,
Sekhar
next prev parent reply other threads:[~2013-04-02 8:35 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 7:49 [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Philip Avinash
2013-03-25 7:49 ` Philip Avinash
2013-03-25 7:49 ` [PATCH v3 2/3] arm: davinci: clock node support for ECAP & EHRPWM Philip Avinash
2013-03-25 7:49 ` Philip Avinash
2013-04-02 8:16 ` Sekhar Nori
2013-04-02 8:16 ` Sekhar Nori
2013-03-25 7:49 ` [PATCH v3 3/3] ARM: davinci: da850: add EHRPWM & ECAP DT node Philip Avinash
2013-03-25 7:49 ` Philip Avinash
2013-04-02 8:33 ` Sekhar Nori
2013-04-02 8:33 ` Sekhar Nori
2013-04-08 9:09 ` Philip, Avinash
2013-04-08 9:09 ` Philip, Avinash
2013-04-08 13:09 ` Sekhar Nori
2013-04-08 13:09 ` Sekhar Nori
2013-04-09 8:42 ` Philip, Avinash
2013-04-09 8:42 ` Philip, Avinash
2013-04-09 11:35 ` Sekhar Nori
2013-04-09 11:35 ` Sekhar Nori
2013-04-10 5:30 ` Philip, Avinash
2013-04-10 5:30 ` Philip, Avinash
2013-04-10 5:55 ` Sekhar Nori
2013-04-10 5:55 ` Sekhar Nori
2013-04-10 6:07 ` Philip, Avinash
2013-04-10 6:07 ` Philip, Avinash
2013-03-25 8:14 ` [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Sekhar Nori
2013-03-25 8:14 ` Sekhar Nori
2013-03-25 8:30 ` Philip, Avinash
2013-03-25 8:30 ` Philip, Avinash
2013-03-25 9:37 ` [PATCH v3 1/3] ARM: davinci: clk framework support for enable/disable functionality Philip Avinash
2013-04-01 11:35 ` Sekhar Nori
2013-04-03 3:58 ` Philip, Avinash
2013-04-02 8:35 ` Sekhar Nori [this message]
2013-04-02 8:35 ` [PATCH v3 0/3] Platform support for EHRPWM & ECAP devices in DAVINCI Sekhar Nori
2013-04-04 4:39 ` Philip, Avinash
2013-04-04 4:39 ` Philip, Avinash
2013-04-04 5:49 ` Sekhar Nori
2013-04-04 5:49 ` Sekhar Nori
2013-04-04 6:38 ` Philip, Avinash
2013-04-04 6:38 ` Philip, Avinash
2013-04-04 10:10 ` Philip, Avinash
2013-04-04 10:10 ` Philip, Avinash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515A983D.8040907@ti.com \
--to=nsekhar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.