* UVD fails to init on rv790 @ 2013-04-03 9:51 Andy Furniss 2013-04-03 11:29 ` Christian König 0 siblings, 1 reply; 9+ messages in thread From: Andy Furniss @ 2013-04-03 9:51 UTC (permalink / raw) To: dri-devel Thanks AMD for getting this out :-) I have an issue, though. On HD4890 drm-fixes kernel (before yesterdays updates) got the new R700_rlc.bin RV770_uvd.bin but on boot I get - [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1682:0x2700). [drm] register mmio base: 0xFE6F0000 [drm] register mmio size: 65536 ATOM BIOS: Wekiva radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] Detected VRAM RAM=1024M, BAR=256M [drm] RAM width 256bits DDR [TTM] Zone kernel: Available graphics memory: 436936 kiB [TTM] Zone highmem: Available graphics memory: 1685484 kiB [TTM] Initializing pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:00.0: irq 51 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [drm] Loading RV770 Microcode [drm] PCIE GART of 512M enabled (table at 0x0000000000257000). radeon 0000:01:00.0: WB enabled radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xff893c00 radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xff893c0c radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005632c and cpu addr 0xfbb9632c [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 3 succeeded in 1 usecs [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1). [drm] Enabling audio support [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128 ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0 [drm] Radeon Display Connectors [drm] Connector 0: [drm] DVI-I-1 [drm] HPD2 [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 1: [drm] DIN-1 [drm] Encoders: [drm] TV1: INTERNAL_KLDSCP_DAC2 [drm] Connector 2: [drm] DVI-I-2 [drm] HPD1 [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] DFP2: INTERNAL_KLDSCP_LVTMA [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xD0359000 [drm] vram apper at 0xD0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 240x67 radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device radeon 0000:01:00.0: registered panic notifier [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 9:51 UVD fails to init on rv790 Andy Furniss @ 2013-04-03 11:29 ` Christian König 2013-04-03 13:21 ` Alex Deucher ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Christian König @ 2013-04-03 11:29 UTC (permalink / raw) To: Andy Furniss; +Cc: dri-devel Hi Andy, crap! I feared that something like this would happen. IIRC we never tested UVD on an rv790, and this hardware isn't easy to get any more. RV770/RV790 have a separate UVD hardware generation (that's why they have their own firmware) and there possible is some bug or something like this that we haven't implemented. You couldn't give me SSH access to that system? Christian. Am 03.04.2013 11:51, schrieb Andy Furniss: > Thanks AMD for getting this out :-) > > I have an issue, though. > > On HD4890 drm-fixes kernel (before yesterdays updates) got the new > > R700_rlc.bin > RV770_uvd.bin > > but on boot I get - > > [drm] radeon kernel modesetting enabled. > [drm] initializing kernel modesetting (RV770 0x1002:0x9460 > 0x1682:0x2700). > [drm] register mmio base: 0xFE6F0000 > [drm] register mmio size: 65536 > ATOM BIOS: Wekiva > radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - > 0x000000003FFFFFFF (1024M used) > radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF > [drm] Detected VRAM RAM=1024M, BAR=256M > [drm] RAM width 256bits DDR > [TTM] Zone kernel: Available graphics memory: 436936 kiB > [TTM] Zone highmem: Available graphics memory: 1685484 kiB > [TTM] Initializing pool allocator > [drm] radeon: 1024M of VRAM memory ready > [drm] radeon: 512M of GTT memory ready. > [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [drm] Driver supports precise vblank timestamp query. > radeon 0000:01:00.0: irq 51 for MSI/MSI-X > radeon 0000:01:00.0: radeon: using MSI. > [drm] radeon: irq initialized. > [drm] GART: num cpu pages 131072, num gpu pages 131072 > [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 > [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 > [drm] Loading RV770 Microcode > [drm] PCIE GART of 512M enabled (table at 0x0000000000257000). > radeon 0000:01:00.0: WB enabled > radeon 0000:01:00.0: fence driver on ring 0 use gpu addr > 0x0000000040000c00 and cpu addr 0xff893c00 > radeon 0000:01:00.0: fence driver on ring 3 use gpu addr > 0x0000000040000c0c and cpu addr 0xff893c0c > radeon 0000:01:00.0: fence driver on ring 5 use gpu addr > 0x000000000005632c and cpu addr 0xfbb9632c > [drm] ring test on 0 succeeded in 1 usecs > [drm] ring test on 3 succeeded in 1 usecs > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the > VCPU!!! > [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! > [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1). > [drm] Enabling audio support > [drm] ib test on ring 0 succeeded in 0 usecs > [drm] ib test on ring 3 succeeded in 0 usecs > ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128 > ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0 > [drm] Radeon Display Connectors > [drm] Connector 0: > [drm] DVI-I-1 > [drm] HPD2 > [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c > [drm] Encoders: > [drm] DFP1: INTERNAL_UNIPHY > [drm] CRT2: INTERNAL_KLDSCP_DAC2 > [drm] Connector 1: > [drm] DIN-1 > [drm] Encoders: > [drm] TV1: INTERNAL_KLDSCP_DAC2 > [drm] Connector 2: > [drm] DVI-I-2 > [drm] HPD1 > [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c > [drm] Encoders: > [drm] CRT1: INTERNAL_KLDSCP_DAC1 > [drm] DFP2: INTERNAL_KLDSCP_LVTMA > [drm] Internal thermal controller with fan control > [drm] radeon: power management initialized > [drm] fb mappable at 0xD0359000 > [drm] vram apper at 0xD0000000 > [drm] size 8294400 > [drm] fb depth is 24 > [drm] pitch is 7680 > fbcon: radeondrmfb (fb0) is primary device > Console: switching to colour frame buffer device 240x67 > radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device > radeon 0000:01:00.0: registered panic notifier > [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 11:29 ` Christian König @ 2013-04-03 13:21 ` Alex Deucher 2013-04-03 20:45 ` Dieter Nützel 2013-04-03 13:37 ` Andy Furniss 2013-04-03 21:40 ` Andreas Boll 2 siblings, 1 reply; 9+ messages in thread From: Alex Deucher @ 2013-04-03 13:21 UTC (permalink / raw) To: Christian König; +Cc: dri-devel On Wed, Apr 3, 2013 at 7:29 AM, Christian König <deathsimple@vodafone.de> wrote: > Hi Andy, > > crap! I feared that something like this would happen. IIRC we never tested > UVD on an rv790, and this hardware isn't easy to get any more. > > RV770/RV790 have a separate UVD hardware generation (that's why they have > their own firmware) and there possible is some bug or something like this > that we haven't implemented. You couldn't give me SSH access to that system? I tested on an RV770 earlier in development and it was working ok at the time I think. I'll give it another try today. Alex > > Christian. > > Am 03.04.2013 11:51, schrieb Andy Furniss: > >> Thanks AMD for getting this out :-) >> >> I have an issue, though. >> >> On HD4890 drm-fixes kernel (before yesterdays updates) got the new >> >> R700_rlc.bin >> RV770_uvd.bin >> >> but on boot I get - >> >> [drm] radeon kernel modesetting enabled. >> [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1682:0x2700). >> [drm] register mmio base: 0xFE6F0000 >> [drm] register mmio size: 65536 >> ATOM BIOS: Wekiva >> radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF >> (1024M used) >> radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF >> [drm] Detected VRAM RAM=1024M, BAR=256M >> [drm] RAM width 256bits DDR >> [TTM] Zone kernel: Available graphics memory: 436936 kiB >> [TTM] Zone highmem: Available graphics memory: 1685484 kiB >> [TTM] Initializing pool allocator >> [drm] radeon: 1024M of VRAM memory ready >> [drm] radeon: 512M of GTT memory ready. >> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [drm] Driver supports precise vblank timestamp query. >> radeon 0000:01:00.0: irq 51 for MSI/MSI-X >> radeon 0000:01:00.0: radeon: using MSI. >> [drm] radeon: irq initialized. >> [drm] GART: num cpu pages 131072, num gpu pages 131072 >> [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 >> [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 >> [drm] Loading RV770 Microcode >> [drm] PCIE GART of 512M enabled (table at 0x0000000000257000). >> radeon 0000:01:00.0: WB enabled >> radeon 0000:01:00.0: fence driver on ring 0 use gpu addr >> 0x0000000040000c00 and cpu addr 0xff893c00 >> radeon 0000:01:00.0: fence driver on ring 3 use gpu addr >> 0x0000000040000c0c and cpu addr 0xff893c0c >> radeon 0000:01:00.0: fence driver on ring 5 use gpu addr >> 0x000000000005632c and cpu addr 0xfbb9632c >> [drm] ring test on 0 succeeded in 1 usecs >> [drm] ring test on 3 succeeded in 1 usecs >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! >> [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1). >> [drm] Enabling audio support >> [drm] ib test on ring 0 succeeded in 0 usecs >> [drm] ib test on ring 3 succeeded in 0 usecs >> ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128 >> ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0 >> [drm] Radeon Display Connectors >> [drm] Connector 0: >> [drm] DVI-I-1 >> [drm] HPD2 >> [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c >> [drm] Encoders: >> [drm] DFP1: INTERNAL_UNIPHY >> [drm] CRT2: INTERNAL_KLDSCP_DAC2 >> [drm] Connector 1: >> [drm] DIN-1 >> [drm] Encoders: >> [drm] TV1: INTERNAL_KLDSCP_DAC2 >> [drm] Connector 2: >> [drm] DVI-I-2 >> [drm] HPD1 >> [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c >> [drm] Encoders: >> [drm] CRT1: INTERNAL_KLDSCP_DAC1 >> [drm] DFP2: INTERNAL_KLDSCP_LVTMA >> [drm] Internal thermal controller with fan control >> [drm] radeon: power management initialized >> [drm] fb mappable at 0xD0359000 >> [drm] vram apper at 0xD0000000 >> [drm] size 8294400 >> [drm] fb depth is 24 >> [drm] pitch is 7680 >> fbcon: radeondrmfb (fb0) is primary device >> Console: switching to colour frame buffer device 240x67 >> radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device >> radeon 0000:01:00.0: registered panic notifier >> [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 >> _______________________________________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/dri-devel >> > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 13:21 ` Alex Deucher @ 2013-04-03 20:45 ` Dieter Nützel 2013-04-03 21:06 ` Alex Deucher 0 siblings, 1 reply; 9+ messages in thread From: Dieter Nützel @ 2013-04-03 20:45 UTC (permalink / raw) To: Alex Deucher; +Cc: Dri Devel Am 2013-04-03 15:21, schrieb Alex Deucher: > On Wed, Apr 3, 2013 at 7:29 AM, Christian König > <deathsimple@vodafone.de> wrote: >> Hi Andy, >> >> crap! I feared that something like this would happen. IIRC we never >> tested >> UVD on an rv790, and this hardware isn't easy to get any more. >> >> RV770/RV790 have a separate UVD hardware generation (that's why they >> have >> their own firmware) and there possible is some bug or something like >> this >> that we haven't implemented. You couldn't give me SSH access to that >> system? > > I tested on an RV770 earlier in development and it was working ok at > the time I think. I'll give it another try today. > > Alex Hello Alex, time goes by so fast --- wife, home, 2 children... but what do I need: I'll test it on my 2 HD4650/RV730 AGP (!) low speed Duron and dual Athlon MP. git:// drm-fixes kernel git:// mesa patches R700_rlc.bin RV710_uvd.bin BTW Any hints for libvdpau_r600.so.1.0.0? I get wrong colors (red is like blue, blue is like yellow, etc.) Thank you very much for all your GREAT work! UVD - What a big day! Regards, Dieter -- The Voodoo5 5000 Dieter...-) Anyone want's it? - I have the original package etc. _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 20:45 ` Dieter Nützel @ 2013-04-03 21:06 ` Alex Deucher 2013-04-03 23:20 ` Dieter Nützel 0 siblings, 1 reply; 9+ messages in thread From: Alex Deucher @ 2013-04-03 21:06 UTC (permalink / raw) To: Dieter Nützel; +Cc: Dri Devel On Wed, Apr 3, 2013 at 4:45 PM, Dieter Nützel <dieter@nuetzel-hh.de> wrote: > Am 2013-04-03 15:21, schrieb Alex Deucher: > >> On Wed, Apr 3, 2013 at 7:29 AM, Christian König <deathsimple@vodafone.de> >> wrote: >>> >>> Hi Andy, >>> >>> crap! I feared that something like this would happen. IIRC we never >>> tested >>> UVD on an rv790, and this hardware isn't easy to get any more. >>> >>> RV770/RV790 have a separate UVD hardware generation (that's why they have >>> their own firmware) and there possible is some bug or something like this >>> that we haven't implemented. You couldn't give me SSH access to that >>> system? >> >> >> I tested on an RV770 earlier in development and it was working ok at >> the time I think. I'll give it another try today. >> >> Alex > > > > Hello Alex, > > time goes by so fast --- wife, home, 2 children... > > but what do I need: > I'll test it on my 2 HD4650/RV730 AGP (!) low speed Duron and dual Athlon > MP. > > git:// drm-fixes kernel > git:// mesa > patches > > R700_rlc.bin > RV710_uvd.bin > > BTW Any hints for libvdpau_r600.so.1.0.0? > I get wrong colors (red is like blue, blue is like yellow, etc.) > What are you testing with? The adobe flash vdpau implementation reverses the channels. IIRC, newer versions of libvdpau have a workaround for it. I've generally been testing with mplayer. mplayer -vo vdpau -vc ffh264vdpau <file> Alex ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 21:06 ` Alex Deucher @ 2013-04-03 23:20 ` Dieter Nützel 0 siblings, 0 replies; 9+ messages in thread From: Dieter Nützel @ 2013-04-03 23:20 UTC (permalink / raw) To: Alex Deucher; +Cc: Dri Devel [-- Attachment #1: Type: text/plain, Size: 7194 bytes --] Am 2013-04-03 23:06, schrieb Alex Deucher: > On Wed, Apr 3, 2013 at 4:45 PM, Dieter Nützel <dieter@nuetzel-hh.de> > wrote: >> Am 2013-04-03 15:21, schrieb Alex Deucher: >> >>> On Wed, Apr 3, 2013 at 7:29 AM, Christian König >>> <deathsimple@vodafone.de> >>> wrote: >>>> >>>> Hi Andy, >>>> >>>> crap! I feared that something like this would happen. IIRC we never >>>> tested >>>> UVD on an rv790, and this hardware isn't easy to get any more. >>>> >>>> RV770/RV790 have a separate UVD hardware generation (that's why >>>> they have >>>> their own firmware) and there possible is some bug or something >>>> like this >>>> that we haven't implemented. You couldn't give me SSH access to >>>> that >>>> system? >>> >>> >>> I tested on an RV770 earlier in development and it was working ok at >>> the time I think. I'll give it another try today. >>> >>> Alex >> >> >> >> Hello Alex, >> >> time goes by so fast --- wife, home, 2 children... >> >> but what do I need: >> I'll test it on my 2 HD4650/RV730 AGP (!) low speed Duron and dual >> Athlon >> MP. >> >> git:// drm-fixes kernel >> git:// mesa >> patches >> >> R700_rlc.bin >> RV710_uvd.bin >> >> BTW Any hints for libvdpau_r600.so.1.0.0? >> I get wrong colors (red is like blue, blue is like yellow, etc.) >> > > What are you testing with? Only mplayer (defaults to vdpau, really?) of course without UVD, currently. Works much better on the slow children's Duron. I have ~10% idle left on our Duron 1800. Without vdpau lib together with HD4650 unplayable on this system. /home/dieter> mplayer /data/Filme/Serenity\ -\ HD\ DVD\ Trailer.mp4 MPlayer dev-SVN-r35127-4.7-openSUSE Linux 12.2 (i586)-Packman (C) 2000-2012 MPlayer Team Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /data/Filme/Serenity - HD DVD Trailer.mp4. libavformat version 54.25.104 (internal) libavformat file format detected. [mov,mp4,m4a,3gp,3g2,mj2 @ 0x8aba6e0]max_analyze_duration 5000000 reached at 5005000 [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0, -alang und [lavf] stream 2: video (mjpeg), -vid 1 VIDEO: [H264] 1280x720 24bpp 23.976 fps 4674.1 kbps (570.6 kbyte/s) Clip info: major_brand: isom minor_version: 1 compatible_brands: isomavc1 creation_time: 1937-04-23 22:52:15 genre: Trailer artist: Universal Pictures title: Serenity - HD DVD Trailer date: 2005 Load subtitles in /data/Filme/ ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 54.54.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 127.5 kbit/8.30% (ratio: 15942->192000) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== AO: [pulse] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Unsupported PixelFormat 61 Unsupported PixelFormat 53 Unsupported PixelFormat 81 Movie-Aspect is undefined - no prescaling applied. VO: [vdpau] 1280x720 => 1280x720 Planar YV12 A: 3.5 V: 2.6 A-V: 0.903 ct: 0.018 0/ 0 56% 72% 0.6% 50 0 ************************************************ **** Your system is too SLOW to play this! **** ************************************************ Possible reasons, problems, workarounds: - Most common: broken/buggy _audio_ driver - Try -ao sdl or use the OSS emulation of ALSA. - Experiment with different values for -autosync, 30 is a good start. - Slow video output - Try a different -vo driver (-vo help for a list) or try -framedrop! - Slow CPU - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts, e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all. - Broken file - Try various combinations of -nobps -ni -forceidx -mc 0. - Slow media (NFS/SMB mounts, DVD, VCD etc) - Try -cache 8192. - Are you using -cache to play a non-interleaved AVI file? - Try -nocache. Read DOCS/HTML/en/video.html for tuning/speedup tips. If none of this helps you, read DOCS/HTML/en/bugreports.html. A: 9.6 V: 7.1 A-V: 2.434 ct: 0.011 0/ 0 58% 69% 1.0% 156 0 Exiting... (Quit) > The adobe flash vdpau implementation > reverses the channels. IIRC, newer versions of libvdpau have a > workaround for it. I know, but I can't use this crappy stupid software since summer 2012, 'cause they do NOT offer any current linux player (even with their hardware acceleration) without SSE2... ...Duron/AthlonMP => AMD could you help, PLEASE?! In the meantime I use an older libflash taken from Chrome without hardware acceleration, too. But it is compiled without SSE2. Due to this the Duron is on it's limits with flash stuff 8-((( lib/browser-plugins> l *flash* lrwxrwxrwx 1 root root 19 14. Mär 22:07 libflashplayer.so -> libgcflashplayer.so -rwxr-xr-x 1 root root 17351000 7. Jun 2012 libgcflashplayer.so lib/browser-plugins> l SSE2/ insgesamt 17029 drwxr-xr-x 2 root root 88 14. Mär 22:06 . drwxr-xr-x 3 root root 328 22. Mär 01:47 .. -rwxr-xr-x 1 root root 17418724 1. Mär 01:30 libflashplayer.so Why can't everybody use runtime CPU detection like Mesa (;-) or mplayer? OpenCV with OpenCL (digikam) would be my next disaster. But former can I recompile without SSE2 to use it with digikam, today. > I've generally been testing with mplayer. mplayer > -vo vdpau -vc ffh264vdpau <file> Tried that: /home/dieter> mplayer -vo vdpau -vc ffh264vdpau /data/Filme/Serenity\ -\ HD\ DVD\ Trailer.mp4 [-] [VD_FFMPEG] Trying pixfmt=0. [vdpau] Failed creating VDPAU decoder: An invalid/unsupported VdpDecoderProfile value was supplied. Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. Try appending the scale filter to your filter list, e.g. -vf spp,scale instead of -vf spp. [h264_vdpau @ 0x8b3db80]decoding to PIX_FMT_NONE is not supported. [h264_vdpau @ 0x8b3db80]ff_MPV_common_init() failed. [h264_vdpau @ 0x8b3db80]decode_slice_header error [h264_vdpau @ 0x8b3db80]no frame! Error while decoding frame! Too many audio packets in the buffer: (4096 in 1401092 bytes). Maybe you are playing a non-interleaved stream/file or the codec failed? For AVI files, try to force non-interleaved mode with the -ni option. FATAL: Could not initialize video filters (-vf) or video output (-vo). Exiting... (End of file) => See log file Any further hint? -Dieter [-- Attachment #2: mplayer.log.bz2 --] [-- Type: application/x-bzip2, Size: 3647 bytes --] [-- Attachment #3: Type: text/plain, Size: 159 bytes --] _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 11:29 ` Christian König 2013-04-03 13:21 ` Alex Deucher @ 2013-04-03 13:37 ` Andy Furniss 2013-04-03 21:40 ` Andreas Boll 2 siblings, 0 replies; 9+ messages in thread From: Andy Furniss @ 2013-04-03 13:37 UTC (permalink / raw) To: Christian König; +Cc: dri-devel Christian König wrote: > Hi Andy, > > crap! I feared that something like this would happen. IIRC we never > tested UVD on an rv790, and this hardware isn't easy to get any more. > > RV770/RV790 have a separate UVD hardware generation (that's why they > have their own firmware) and there possible is some bug or something > like this that we haven't implemented. You couldn't give me SSH access > to that system? I can if you still need it this evening. My stupid ISP has taken to blocking lots of things for their home users like git:// svn and nntp and I suspect it maybe the same for ssh. The blocks are lifted at 20:00 local time (19:00 UTC) so I can mail you off list around then. In the meantime I'll remember how to use iptables :-) and also repeat UVD patching/testing on a different boot in case I messed up. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 2013-04-03 11:29 ` Christian König 2013-04-03 13:21 ` Alex Deucher 2013-04-03 13:37 ` Andy Furniss @ 2013-04-03 21:40 ` Andreas Boll 2 siblings, 0 replies; 9+ messages in thread From: Andreas Boll @ 2013-04-03 21:40 UTC (permalink / raw) To: Christian König; +Cc: dri-devel [-- Attachment #1.1: Type: text/plain, Size: 5460 bytes --] FYI I get the same errors on rv770 (HD4870) Andreas. 2013/4/3 Christian König <deathsimple@vodafone.de> > Hi Andy, > > crap! I feared that something like this would happen. IIRC we never tested > UVD on an rv790, and this hardware isn't easy to get any more. > > RV770/RV790 have a separate UVD hardware generation (that's why they have > their own firmware) and there possible is some bug or something like this > that we haven't implemented. You couldn't give me SSH access to that system? > > Christian. > > Am 03.04.2013 11:51, schrieb Andy Furniss: > > Thanks AMD for getting this out :-) >> >> I have an issue, though. >> >> On HD4890 drm-fixes kernel (before yesterdays updates) got the new >> >> R700_rlc.bin >> RV770_uvd.bin >> >> but on boot I get - >> >> [drm] radeon kernel modesetting enabled. >> [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1682:0x2700). >> [drm] register mmio base: 0xFE6F0000 >> [drm] register mmio size: 65536 >> ATOM BIOS: Wekiva >> radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF >> (1024M used) >> radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF >> [drm] Detected VRAM RAM=1024M, BAR=256M >> [drm] RAM width 256bits DDR >> [TTM] Zone kernel: Available graphics memory: 436936 kiB >> [TTM] Zone highmem: Available graphics memory: 1685484 kiB >> [TTM] Initializing pool allocator >> [drm] radeon: 1024M of VRAM memory ready >> [drm] radeon: 512M of GTT memory ready. >> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [drm] Driver supports precise vblank timestamp query. >> radeon 0000:01:00.0: irq 51 for MSI/MSI-X >> radeon 0000:01:00.0: radeon: using MSI. >> [drm] radeon: irq initialized. >> [drm] GART: num cpu pages 131072, num gpu pages 131072 >> [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 >> [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 >> [drm] Loading RV770 Microcode >> [drm] PCIE GART of 512M enabled (table at 0x0000000000257000). >> radeon 0000:01:00.0: WB enabled >> radeon 0000:01:00.0: fence driver on ring 0 use gpu addr >> 0x0000000040000c00 and cpu addr 0xff893c00 >> radeon 0000:01:00.0: fence driver on ring 3 use gpu addr >> 0x0000000040000c0c and cpu addr 0xff893c0c >> radeon 0000:01:00.0: fence driver on ring 5 use gpu addr >> 0x000000000005632c and cpu addr 0xfbb9632c >> [drm] ring test on 0 succeeded in 1 usecs >> [drm] ring test on 3 succeeded in 1 usecs >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the >> VCPU!!! >> [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! >> [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1). >> [drm] Enabling audio support >> [drm] ib test on ring 0 succeeded in 0 usecs >> [drm] ib test on ring 3 succeeded in 0 usecs >> ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128 >> ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0 >> [drm] Radeon Display Connectors >> [drm] Connector 0: >> [drm] DVI-I-1 >> [drm] HPD2 >> [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c >> [drm] Encoders: >> [drm] DFP1: INTERNAL_UNIPHY >> [drm] CRT2: INTERNAL_KLDSCP_DAC2 >> [drm] Connector 1: >> [drm] DIN-1 >> [drm] Encoders: >> [drm] TV1: INTERNAL_KLDSCP_DAC2 >> [drm] Connector 2: >> [drm] DVI-I-2 >> [drm] HPD1 >> [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c >> [drm] Encoders: >> [drm] CRT1: INTERNAL_KLDSCP_DAC1 >> [drm] DFP2: INTERNAL_KLDSCP_LVTMA >> [drm] Internal thermal controller with fan control >> [drm] radeon: power management initialized >> [drm] fb mappable at 0xD0359000 >> [drm] vram apper at 0xD0000000 >> [drm] size 8294400 >> [drm] fb depth is 24 >> [drm] pitch is 7680 >> fbcon: radeondrmfb (fb0) is primary device >> Console: switching to colour frame buffer device 240x67 >> radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device >> radeon 0000:01:00.0: registered panic notifier >> [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0 >> ______________________________**_________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.**org <dri-devel@lists.freedesktop.org> >> http://lists.freedesktop.org/**mailman/listinfo/dri-devel<http://lists.freedesktop.org/mailman/listinfo/dri-devel> >> >> > ______________________________**_________________ > dri-devel mailing list > dri-devel@lists.freedesktop.**org <dri-devel@lists.freedesktop.org> > http://lists.freedesktop.org/**mailman/listinfo/dri-devel<http://lists.freedesktop.org/mailman/listinfo/dri-devel> > [-- Attachment #1.2: Type: text/html, Size: 6170 bytes --] [-- Attachment #2: Type: text/plain, Size: 159 bytes --] _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UVD fails to init on rv790 @ 2013-04-03 11:26 K. Schnass 0 siblings, 0 replies; 9+ messages in thread From: K. Schnass @ 2013-04-03 11:26 UTC (permalink / raw) To: dri-devel > Thanks AMD for getting this out :-) +1 > I have an issue, though. ;( +1 Exactly the same problem but on a RV770! Noticed that the RV710_uvd.bin is some 20kb bigger than the RV770 one so maybe that is the problem? lspci -nnv: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device [174b:e104] Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] I/O ports at d000 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Kernel driver in use: radeon ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-04-03 23:20 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-03 9:51 UVD fails to init on rv790 Andy Furniss 2013-04-03 11:29 ` Christian König 2013-04-03 13:21 ` Alex Deucher 2013-04-03 20:45 ` Dieter Nützel 2013-04-03 21:06 ` Alex Deucher 2013-04-03 23:20 ` Dieter Nützel 2013-04-03 13:37 ` Andy Furniss 2013-04-03 21:40 ` Andreas Boll -- strict thread matches above, loose matches on Subject: below -- 2013-04-03 11:26 K. Schnass
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.