From: Lars-Peter Clausen <lars@metafoo.de>
To: Laxman Dewangan <ldewangan@nvidia.com>
Cc: alsa-devel@alsa-project.org, swarren@wwwdotorg.org,
tiwai@suse.de, broonie@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH] sound: soc: tegra: do not provide PAUSE/RESUME in hardware info
Date: Wed, 03 Apr 2013 12:26:04 +0200 [thread overview]
Message-ID: <515C03BC.3040301@metafoo.de> (raw)
In-Reply-To: <1364980781-2204-1-git-send-email-ldewangan@nvidia.com>
On 04/03/2013 11:19 AM, Laxman Dewangan wrote:
> Tegra PCM driver uses the dmaengine based DMA driver and Tegra DMA
> driver does not support the pause/resume functionality as hardware
> does not support it.
>
> ALSA driver support the sw based pause/resume functionality if hardware
> does not support it and in this case, hw driver should not provide
> the hardware info with PAUSE/RESUME bit enable.
>
> Remmoving the SNDRV_PCM_INFO_PAUSE and SNDRV_PCM_INFO_RESUME from hardware
> info and using the snd_dmaengine_pcm_trigger() for pcm_trigger callback.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Hm, I sent out the same patch just half an our or so ago.
- Lars
> ---
> Lars reported that if driver/chip dma driver does not support the pause/resume
> then need not to export this info through the hw capability and leave this
> implementation to alsa driver.
>
> Making the change accordingly.
>
> sound/soc/tegra/tegra_pcm.c | 24 +-----------------------
> 1 files changed, 1 insertions(+), 23 deletions(-)
>
> diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
> index e67af0b..117cccc 100644
> --- a/sound/soc/tegra/tegra_pcm.c
> +++ b/sound/soc/tegra/tegra_pcm.c
> @@ -43,8 +43,6 @@
> static const struct snd_pcm_hardware tegra_pcm_hardware = {
> .info = SNDRV_PCM_INFO_MMAP |
> SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_PAUSE |
> - SNDRV_PCM_INFO_RESUME |
> SNDRV_PCM_INFO_INTERLEAVED,
> .formats = SNDRV_PCM_FMTBIT_S16_LE,
> .channels_min = 2,
> @@ -121,26 +119,6 @@ static int tegra_pcm_hw_free(struct snd_pcm_substream *substream)
> return 0;
> }
>
> -static int tegra_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - case SNDRV_PCM_TRIGGER_RESUME:
> - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> - return snd_dmaengine_pcm_trigger(substream,
> - SNDRV_PCM_TRIGGER_START);
> -
> - case SNDRV_PCM_TRIGGER_STOP:
> - case SNDRV_PCM_TRIGGER_SUSPEND:
> - case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> - return snd_dmaengine_pcm_trigger(substream,
> - SNDRV_PCM_TRIGGER_STOP);
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> static int tegra_pcm_mmap(struct snd_pcm_substream *substream,
> struct vm_area_struct *vma)
> {
> @@ -158,7 +136,7 @@ static struct snd_pcm_ops tegra_pcm_ops = {
> .ioctl = snd_pcm_lib_ioctl,
> .hw_params = tegra_pcm_hw_params,
> .hw_free = tegra_pcm_hw_free,
> - .trigger = tegra_pcm_trigger,
> + .trigger = snd_dmaengine_pcm_trigger,
> .pointer = snd_dmaengine_pcm_pointer,
> .mmap = tegra_pcm_mmap,
> };
WARNING: multiple messages have this Message-ID (diff)
From: Lars-Peter Clausen <lars@metafoo.de>
To: Laxman Dewangan <ldewangan@nvidia.com>
Cc: broonie@opensource.wolfsonmicro.com, swarren@wwwdotorg.org,
alsa-devel@alsa-project.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org, tiwai@suse.de, perex@perex.cz
Subject: Re: [PATCH] sound: soc: tegra: do not provide PAUSE/RESUME in hardware info
Date: Wed, 03 Apr 2013 12:26:04 +0200 [thread overview]
Message-ID: <515C03BC.3040301@metafoo.de> (raw)
In-Reply-To: <1364980781-2204-1-git-send-email-ldewangan@nvidia.com>
On 04/03/2013 11:19 AM, Laxman Dewangan wrote:
> Tegra PCM driver uses the dmaengine based DMA driver and Tegra DMA
> driver does not support the pause/resume functionality as hardware
> does not support it.
>
> ALSA driver support the sw based pause/resume functionality if hardware
> does not support it and in this case, hw driver should not provide
> the hardware info with PAUSE/RESUME bit enable.
>
> Remmoving the SNDRV_PCM_INFO_PAUSE and SNDRV_PCM_INFO_RESUME from hardware
> info and using the snd_dmaengine_pcm_trigger() for pcm_trigger callback.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Hm, I sent out the same patch just half an our or so ago.
- Lars
> ---
> Lars reported that if driver/chip dma driver does not support the pause/resume
> then need not to export this info through the hw capability and leave this
> implementation to alsa driver.
>
> Making the change accordingly.
>
> sound/soc/tegra/tegra_pcm.c | 24 +-----------------------
> 1 files changed, 1 insertions(+), 23 deletions(-)
>
> diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
> index e67af0b..117cccc 100644
> --- a/sound/soc/tegra/tegra_pcm.c
> +++ b/sound/soc/tegra/tegra_pcm.c
> @@ -43,8 +43,6 @@
> static const struct snd_pcm_hardware tegra_pcm_hardware = {
> .info = SNDRV_PCM_INFO_MMAP |
> SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_PAUSE |
> - SNDRV_PCM_INFO_RESUME |
> SNDRV_PCM_INFO_INTERLEAVED,
> .formats = SNDRV_PCM_FMTBIT_S16_LE,
> .channels_min = 2,
> @@ -121,26 +119,6 @@ static int tegra_pcm_hw_free(struct snd_pcm_substream *substream)
> return 0;
> }
>
> -static int tegra_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> -{
> - switch (cmd) {
> - case SNDRV_PCM_TRIGGER_START:
> - case SNDRV_PCM_TRIGGER_RESUME:
> - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> - return snd_dmaengine_pcm_trigger(substream,
> - SNDRV_PCM_TRIGGER_START);
> -
> - case SNDRV_PCM_TRIGGER_STOP:
> - case SNDRV_PCM_TRIGGER_SUSPEND:
> - case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> - return snd_dmaengine_pcm_trigger(substream,
> - SNDRV_PCM_TRIGGER_STOP);
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> static int tegra_pcm_mmap(struct snd_pcm_substream *substream,
> struct vm_area_struct *vma)
> {
> @@ -158,7 +136,7 @@ static struct snd_pcm_ops tegra_pcm_ops = {
> .ioctl = snd_pcm_lib_ioctl,
> .hw_params = tegra_pcm_hw_params,
> .hw_free = tegra_pcm_hw_free,
> - .trigger = tegra_pcm_trigger,
> + .trigger = snd_dmaengine_pcm_trigger,
> .pointer = snd_dmaengine_pcm_pointer,
> .mmap = tegra_pcm_mmap,
> };
next prev parent reply other threads:[~2013-04-03 9:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 9:19 [PATCH] sound: soc: tegra: do not provide PAUSE/RESUME in hardware info Laxman Dewangan
2013-04-03 9:19 ` Laxman Dewangan
2013-04-03 10:26 ` Lars-Peter Clausen [this message]
2013-04-03 10:26 ` Lars-Peter Clausen
[not found] ` <515C03BC.3040301-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2013-04-03 9:33 ` Laxman Dewangan
2013-04-03 9:33 ` Laxman Dewangan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515C03BC.3040301@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.