* [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10
@ 2013-04-08 18:18 ` Kukjin Kim
0 siblings, 0 replies; 6+ messages in thread
From: Kukjin Kim @ 2013-04-08 18:18 UTC (permalink / raw)
To: Arnd Bergmann, 'Olof Johansson'
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
The following changes since commit d98fedef912832611b668fa7ece8e8ff54a6a590:
gpio: samsung: fixes build warning with s3c2410_defconfig (2013-03-05
20:21:36 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/irq-s3c24xx-for-v3.10
for you to fetch changes up to f0774d41da0e607b70e54ecc50aeb6684f54c2b1:
irqchip: s3c24xx: add devicetree support (2013-04-04 14:56:30 +0900)
----------------------------------------------------------------
s3c24xx irq cleanup and move into drivers/irqchip
----------------------------------------------------------------
Heiko Stuebner (12):
ARM: S3C24XX: fix redundant checks in the irq mapping function
ARM: S3C24XX: fix irq parent check
ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
ARM: S3C24XX: make s3c24xx_init_intc static
ARM: S3C24XX: add handle_irq function
ARM: S3C24XX: move irq driver to drivers/irqchip
irqchip: s3c24xx: fix comments on some camera interrupts
irqchip: s3c24xx: fix irqlist of second s3c2416 controller
irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
irqchip: s3c24xx: globally keep track of the created intc instances
irqchip: s3c24xx: make interrupt handling independent of
irq_domain structure
irqchip: s3c24xx: add devicetree support
.../interrupt-controller/samsung,s3c24xx-irq.txt | 53 +++
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/common.h | 1 +
arch/arm/mach-s3c24xx/include/mach/entry-macro.S | 70 ---
arch/arm/mach-s3c24xx/mach-amlm5900.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-h1940.c | 7 +-
arch/arm/mach-s3c24xx/mach-n30.c | 4 +-
arch/arm/mach-s3c24xx/mach-otom.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-smdk2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 2 +-
arch/arm/mach-s3c24xx/mach-vr1000.c | 2 +-
arch/arm/plat-samsung/include/plat/cpu.h | 1 -
drivers/irqchip/Makefile | 1 +
.../irq.c => drivers/irqchip/irq-s3c24xx.c | 523
++++++++++++++++-----
17 files changed, 472 insertions(+), 205 deletions(-)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/entry-macro.S
rename arch/arm/mach-s3c24xx/irq.c => drivers/irqchip/irq-s3c24xx.c (75%)
--
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 6+ messages in thread* [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 @ 2013-04-08 18:18 ` Kukjin Kim 0 siblings, 0 replies; 6+ messages in thread From: Kukjin Kim @ 2013-04-08 18:18 UTC (permalink / raw) To: linux-arm-kernel The following changes since commit d98fedef912832611b668fa7ece8e8ff54a6a590: gpio: samsung: fixes build warning with s3c2410_defconfig (2013-03-05 20:21:36 +0900) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git tags/irq-s3c24xx-for-v3.10 for you to fetch changes up to f0774d41da0e607b70e54ecc50aeb6684f54c2b1: irqchip: s3c24xx: add devicetree support (2013-04-04 14:56:30 +0900) ---------------------------------------------------------------- s3c24xx irq cleanup and move into drivers/irqchip ---------------------------------------------------------------- Heiko Stuebner (12): ARM: S3C24XX: fix redundant checks in the irq mapping function ARM: S3C24XX: fix irq parent check ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq ARM: S3C24XX: make s3c24xx_init_intc static ARM: S3C24XX: add handle_irq function ARM: S3C24XX: move irq driver to drivers/irqchip irqchip: s3c24xx: fix comments on some camera interrupts irqchip: s3c24xx: fix irqlist of second s3c2416 controller irqchip: s3c24xx: add irq_set_type callback for basic interrupt types irqchip: s3c24xx: globally keep track of the created intc instances irqchip: s3c24xx: make interrupt handling independent of irq_domain structure irqchip: s3c24xx: add devicetree support .../interrupt-controller/samsung,s3c24xx-irq.txt | 53 +++ arch/arm/Kconfig | 1 + arch/arm/mach-s3c24xx/Makefile | 2 +- arch/arm/mach-s3c24xx/common.h | 1 + arch/arm/mach-s3c24xx/include/mach/entry-macro.S | 70 --- arch/arm/mach-s3c24xx/mach-amlm5900.c | 2 +- arch/arm/mach-s3c24xx/mach-bast.c | 2 +- arch/arm/mach-s3c24xx/mach-h1940.c | 7 +- arch/arm/mach-s3c24xx/mach-n30.c | 4 +- arch/arm/mach-s3c24xx/mach-otom.c | 2 +- arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +- arch/arm/mach-s3c24xx/mach-smdk2410.c | 2 +- arch/arm/mach-s3c24xx/mach-tct_hammer.c | 2 +- arch/arm/mach-s3c24xx/mach-vr1000.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 1 - drivers/irqchip/Makefile | 1 + .../irq.c => drivers/irqchip/irq-s3c24xx.c | 523 ++++++++++++++++----- 17 files changed, 472 insertions(+), 205 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt delete mode 100644 arch/arm/mach-s3c24xx/include/mach/entry-macro.S rename arch/arm/mach-s3c24xx/irq.c => drivers/irqchip/irq-s3c24xx.c (75%) -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 2013-04-08 18:18 ` Kukjin Kim @ 2013-04-09 20:19 ` Arnd Bergmann -1 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2013-04-09 20:19 UTC (permalink / raw) To: Kukjin Kim Cc: 'Olof Johansson', linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org On Monday 08 April 2013, Kukjin Kim wrote: > s3c24xx irq cleanup and move into drivers/irqchip I had a little trouble applying this because of the interface change to CLOCKSOURCE_OF_DECLARE. This is the rather complex merge I did. Please check that it still works. Arnd commit 682f619ef995c6bc7e07b356451b8d762caefc5e Merge: 894b738 354599f Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Apr 9 22:07:37 2013 +0200 Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> diff --cc drivers/clocksource/Makefile index e74c8ce,1c1b15d..cd1f09c --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@@ -19,7 -19,7 +19,8 @@@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_t obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o - obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o ++obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o + obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o diff --cc drivers/clocksource/exynos_mct.c index c9d6650,d3f1327..957af86 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@@ -445,13 -477,17 +477,17 @@@ static struct local_timer_ops exynos4_m }; #endif /* CONFIG_LOCAL_TIMERS */ - static void __init exynos4_timer_resources(void) -static void __init exynos4_timer_resources(struct device_node *np) ++static void __init exynos4_timer_resources(void __iomem *base) { struct clk *mct_clk; mct_clk = clk_get(NULL, "xtal"); clk_rate = clk_get_rate(mct_clk); - reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER; ++ reg_base = base; + if (!reg_base) + panic("%s: unable to ioremap mct address space\n", __func__); + #ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@@ -467,19 -503,49 +503,54 @@@ #endif /* CONFIG_LOCAL_TIMERS */ } - void __init exynos4_timer_init(void) -static const struct of_device_id exynos_mct_ids[] = { - { .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI }, - { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI }, - { } -}; - + void __init mct_init(void) { - if (soc_is_exynos5440()) { - arch_timer_of_register(); - return; - struct device_node *np = NULL; - const struct of_device_id *match; - u32 nr_irqs, i; - -#ifdef CONFIG_OF - np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match); -#endif - if (np) { - mct_int_type = (u32)(match->data); - - /* This driver uses only one global timer interrupt */ - mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); - - /* - * Find out the number of local irqs specified. The local - * timer irqs are specified after the four global timer - * irqs are specified. - */ -#ifdef CONFIG_OF - nr_irqs = of_irq_count(np); -#endif - for (i = MCT_L0_IRQ; i < nr_irqs; i++) - mct_irqs[i] = irq_of_parse_and_map(np, i); - } else if (soc_is_exynos4210()) { ++ if (soc_is_exynos4210()) { + mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; + mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; + mct_int_type = MCT_INT_SPI; + } else { + panic("unable to determine mct controller type\n"); } - if ((soc_is_exynos4210()) || (soc_is_exynos5250())) - mct_int_type = MCT_INT_SPI; - else - mct_int_type = MCT_INT_PPI; - exynos4_timer_resources(np); ++ exynos4_timer_resources(S5P_VA_SYSTIMER); + exynos4_clocksource_init(); + exynos4_clockevent_init(); + } -CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init); -CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init); + - exynos4_timer_resources(); ++static void __init mct_init_dt(struct device_node *np, unsigned int int_type) ++{ ++ u32 nr_irqs, i; ++ ++ mct_int_type = int_type; ++ ++ /* This driver uses only one global timer interrupt */ ++ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); ++ ++ /* ++ * Find out the number of local irqs specified. The local ++ * timer irqs are specified after the four global timer ++ * irqs are specified. ++ */ ++ nr_irqs = of_irq_count(np); ++ for (i = MCT_L0_IRQ; i < nr_irqs; i++) ++ mct_irqs[i] = irq_of_parse_and_map(np, i); ++ ++ exynos4_timer_resources(of_iomap(np, 0)); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} ++ ++ ++static void __init mct_init_spi(struct device_node *np) ++{ ++ return mct_init_dt(np, MCT_INT_SPI); ++} ++ ++static void __init mct_init_ppi(struct device_node *np) ++{ ++ return mct_init_dt(np, MCT_INT_PPI); ++} ++CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi); ++CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi); ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 @ 2013-04-09 20:19 ` Arnd Bergmann 0 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2013-04-09 20:19 UTC (permalink / raw) To: linux-arm-kernel On Monday 08 April 2013, Kukjin Kim wrote: > s3c24xx irq cleanup and move into drivers/irqchip I had a little trouble applying this because of the interface change to CLOCKSOURCE_OF_DECLARE. This is the rather complex merge I did. Please check that it still works. Arnd commit 682f619ef995c6bc7e07b356451b8d762caefc5e Merge: 894b738 354599f Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Apr 9 22:07:37 2013 +0200 Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> diff --cc drivers/clocksource/Makefile index e74c8ce,1c1b15d..cd1f09c --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@@ -19,7 -19,7 +19,8 @@@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_t obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o - obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o ++obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o + obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o diff --cc drivers/clocksource/exynos_mct.c index c9d6650,d3f1327..957af86 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@@ -445,13 -477,17 +477,17 @@@ static struct local_timer_ops exynos4_m }; #endif /* CONFIG_LOCAL_TIMERS */ - static void __init exynos4_timer_resources(void) -static void __init exynos4_timer_resources(struct device_node *np) ++static void __init exynos4_timer_resources(void __iomem *base) { struct clk *mct_clk; mct_clk = clk_get(NULL, "xtal"); clk_rate = clk_get_rate(mct_clk); - reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER; ++ reg_base = base; + if (!reg_base) + panic("%s: unable to ioremap mct address space\n", __func__); + #ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@@ -467,19 -503,49 +503,54 @@@ #endif /* CONFIG_LOCAL_TIMERS */ } - void __init exynos4_timer_init(void) -static const struct of_device_id exynos_mct_ids[] = { - { .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI }, - { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI }, - { } -}; - + void __init mct_init(void) { - if (soc_is_exynos5440()) { - arch_timer_of_register(); - return; - struct device_node *np = NULL; - const struct of_device_id *match; - u32 nr_irqs, i; - -#ifdef CONFIG_OF - np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match); -#endif - if (np) { - mct_int_type = (u32)(match->data); - - /* This driver uses only one global timer interrupt */ - mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); - - /* - * Find out the number of local irqs specified. The local - * timer irqs are specified after the four global timer - * irqs are specified. - */ -#ifdef CONFIG_OF - nr_irqs = of_irq_count(np); -#endif - for (i = MCT_L0_IRQ; i < nr_irqs; i++) - mct_irqs[i] = irq_of_parse_and_map(np, i); - } else if (soc_is_exynos4210()) { ++ if (soc_is_exynos4210()) { + mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; + mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; + mct_int_type = MCT_INT_SPI; + } else { + panic("unable to determine mct controller type\n"); } - if ((soc_is_exynos4210()) || (soc_is_exynos5250())) - mct_int_type = MCT_INT_SPI; - else - mct_int_type = MCT_INT_PPI; - exynos4_timer_resources(np); ++ exynos4_timer_resources(S5P_VA_SYSTIMER); + exynos4_clocksource_init(); + exynos4_clockevent_init(); + } -CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init); -CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init); + - exynos4_timer_resources(); ++static void __init mct_init_dt(struct device_node *np, unsigned int int_type) ++{ ++ u32 nr_irqs, i; ++ ++ mct_int_type = int_type; ++ ++ /* This driver uses only one global timer interrupt */ ++ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); ++ ++ /* ++ * Find out the number of local irqs specified. The local ++ * timer irqs are specified after the four global timer ++ * irqs are specified. ++ */ ++ nr_irqs = of_irq_count(np); ++ for (i = MCT_L0_IRQ; i < nr_irqs; i++) ++ mct_irqs[i] = irq_of_parse_and_map(np, i); ++ ++ exynos4_timer_resources(of_iomap(np, 0)); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} ++ ++ ++static void __init mct_init_spi(struct device_node *np) ++{ ++ return mct_init_dt(np, MCT_INT_SPI); ++} ++ ++static void __init mct_init_ppi(struct device_node *np) ++{ ++ return mct_init_dt(np, MCT_INT_PPI); ++} ++CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi); ++CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi); ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 2013-04-09 20:19 ` Arnd Bergmann @ 2013-04-09 20:21 ` Arnd Bergmann -1 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2013-04-09 20:21 UTC (permalink / raw) To: Kukjin Kim Cc: 'Olof Johansson', linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org On Tuesday 09 April 2013, Arnd Bergmann wrote: > On Monday 08 April 2013, Kukjin Kim wrote: > > s3c24xx irq cleanup and move into drivers/irqchip > > I had a little trouble applying this because of the interface change to > CLOCKSOURCE_OF_DECLARE. This is the rather complex merge I did. Please > check that it still works. The reply should have been for patch 3/10. I've merged both into the next/drivers branch. Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
* [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 @ 2013-04-09 20:21 ` Arnd Bergmann 0 siblings, 0 replies; 6+ messages in thread From: Arnd Bergmann @ 2013-04-09 20:21 UTC (permalink / raw) To: linux-arm-kernel On Tuesday 09 April 2013, Arnd Bergmann wrote: > On Monday 08 April 2013, Kukjin Kim wrote: > > s3c24xx irq cleanup and move into drivers/irqchip > > I had a little trouble applying this because of the interface change to > CLOCKSOURCE_OF_DECLARE. This is the rather complex merge I did. Please > check that it still works. The reply should have been for patch 3/10. I've merged both into the next/drivers branch. Arnd ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-04-09 20:21 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-08 18:18 [GIT PULL 02/10] 2nd irq-s3c24xx for v3.10 Kukjin Kim 2013-04-08 18:18 ` Kukjin Kim 2013-04-09 20:19 ` Arnd Bergmann 2013-04-09 20:19 ` Arnd Bergmann 2013-04-09 20:21 ` Arnd Bergmann 2013-04-09 20:21 ` Arnd Bergmann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.