From: Benoit Cousson <b-cousson@ti.com>
To: "tony@atomide.com" <tony@atomide.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [GIT PULL] ARM: OMAP: Device Tree for 3.10
Date: Tue, 9 Apr 2013 00:46:13 +0200 [thread overview]
Message-ID: <516348B5.3060400@ti.com> (raw)
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.10.
Note that the branch is based on two other branches:
- omap-devel-b-for-3.10 from Paul to get the AM33xx missing hwmod and thus avoid a regression with Santosh's hwmod cleanup including in this DT series [1]. It avoids breaking bisect if this series is merged before Paul's fixes.
- omap-for-v3.10/usb branch to avoid nasty merge conflict in omap3.dtsi and omap4.dtsi due to the DTS patches contains in the USB branch.
Regards,
Benoit
[1] https://patchwork.kernel.org/patch/2366291/
---
The following changes since commit 5852264f9d6139751796853fdfca9d5230cbfb97:
Benoit Cousson (1):
Merge tag 'omap-devel-b-for-3.10' of git://git.kernel.org/.../pjw/omap-pending into for_3.10/dts_merged
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.10/dts
Anil Kumar (3):
ARM: dts: Add minimal DT support for DevKit8000
ARM: dts: omap3-devkit8000: Enable audio support
ARM: dts: omap3-devkit8000: Add NAND DT node
AnilKumar Ch (3):
ARM: dts: AM33XX: Rename I2C and GPIO nodes
ARM: dts: AM33XX: Add d_can instances to aliases
ARM: dts: AM33XX: Add memory resource to d_can node
Felipe Balbi (1):
ARM: dts: OMAP5: Add SPI nodes
Florian Vaussard (3):
ARM: dts: omap3-overo: Add support for pwm-leds
ARM: dts: omap3-overo: Add audio support
ARM: dts: OMAP3: Add GPMC controller
Javier Martinez Canillas (5):
ARM: dts: omap3: Add generic DT support for IGEP devices
ARM: dts: omap3: Add support for IGEPv2 board
ARM: dts: omap3: Add support for IGEP COM Module
ARM: dts: OMAP3: reduce GPMC mapped registers address space
Documentation: dt: gpio-omap: Move interrupt-controller from #interrupt-cells description
Jon Hunter (16):
ARM: OMAP2+: Prepare for device-tree PMU support
ARM: dts: OMAP2+: Add PMU nodes
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
ARM: dts: Add OMAP2 gpio bindings
ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
ARM: dts: OMAP3: Add reg and interrupt properties for gpio
ARM: dts: OMAP3: Add support for OMAP3430 SDP board
ARM: OMAP: Force dmtimer restore if context loss is not detectable
ARM: OMAP: Add function to request timer by node
ARM: dts: OMAP2+: Update DMTIMER compatibility property
ARM: OMAP2+: Populate DMTIMER errata when using device-tree
ARM: dts: OMAP2+: Identify GPIO banks that are always powered
ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties
ARM: dts: Add NOR flash bindings for OMAP2420 H4
ARM: dts: Add OMAP3430 SDP NOR flash memory binding
Kishon Vijay Abraham I (7):
ARM: dts: OMAP4: Add omap control usb data
ARM: dts: OMAP4: Add omap-usb2 data
ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
ARM: dts: OMAP5: Add OMAP control usb data
ARM: dts: OMAP5: Add ocp2scp data
ARM: dts: OMAP5: Add omap-usb3 and omap-usb2 data
ARM: dts: OMAP5: add dwc3 omap and dwc3 core data
Lokesh Vutla (1):
ARM: dts: OMAP5: Add watchdog timer node
Matthias Brugger (1):
ARM: dts: omap3-igep: Add uart1 and uart2 to igep boards
NeilBrown (1):
ARM: OMAP: Simplify dmtimer context-loss handling
Nishanth Menon (6):
ARM: dts: OMAP34xx/35xx: Add CPU OPP table
ARM: dts: OMAP36xx: Add CPU OPP table
ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU
ARM: dts: OMAP443x: Add CPU OPP table
ARM: dts: omap4-panda: move generic sections to panda-common
ARM: dts: OMAP4460: Add CPU OPP table
Peter Ujfalusi (5):
ARM: dts: twl4030: Add PWM support
ARM: dts: twl6030: Add PWM support
ARM: dts: omap3-beagle-xm: Use pwm-leds for pmu_stat LED
ARM: dts: omap4-sdp: Add support for pwm-leds (keypad and charging LED)
ARM: dts: omap4-sdp: Add support for pwm-backlight
Philip Avinash (1):
ARM: dts: AM33XX: Corrects typo in interrupt field in SPI node
Rajendra Nayak (1):
ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
Santosh Shilimkar (9):
ARM: dts: omap5-evm: Update available memory to 2032 MB
ARM: dts: OMAP5: Align the local timer dt node as per the current binding code
ARM: dts: OMAP5: Move the gic node out of ocp space
ARM: dts: OMAP5: Update the timer and GIC nodes for HYP kernel support
ARM: dts: OMAP5: Update keypad reg property
Documentation: dt: OMAP: l3-noc: Add *reg* in required properties
ARM: dts: OMAP4/5: Update l3-noc DT nodes
ARM: OMAP2+: hwmod: extract module address space from DT blob
ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc
Sebastien Guiriec (1):
ARM: dts: OMAP2+: Add SDMA Audio IPs bindings
Sourav Poddar (4):
ARM: dts: omap4-sdp: Add I2c pinctrl data
ARM: dts: omap5-evm: Add I2c pinctrl data
ARM: dts: omap4-panda: Add I2c pinctrl data
ARM: dts: omap5-evm: Add mcspi data
.../devicetree/bindings/arm/omap/l3-noc.txt | 1 +
.../devicetree/bindings/arm/omap/timer.txt | 17 ++-
.../devicetree/bindings/gpio/gpio-omap.txt | 8 +-
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/am335x-bone.dts | 10 +-
arch/arm/boot/dts/am335x-evm.dts | 18 +-
arch/arm/boot/dts/am335x-evmsk.dts | 18 +-
arch/arm/boot/dts/am33xx.dtsi | 40 ++--
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/omap2.dtsi | 39 +++-
arch/arm/boot/dts/omap2420-h4.dts | 46 ++++
arch/arm/boot/dts/omap2420.dtsi | 67 +++++-
arch/arm/boot/dts/omap2430.dtsi | 87 +++++++-
arch/arm/boot/dts/omap3-beagle-xm.dts | 26 ++-
arch/arm/boot/dts/omap3-beagle.dts | 8 +-
arch/arm/boot/dts/omap3-devkit8000.dts | 169 +++++++++++++
arch/arm/boot/dts/omap3-evm.dts | 14 +-
arch/arm/boot/dts/omap3-igep.dtsi | 122 ++++++++++
arch/arm/boot/dts/omap3-igep0020.dts | 56 +++++
arch/arm/boot/dts/omap3-igep0030.dts | 44 ++++
arch/arm/boot/dts/omap3-overo.dtsi | 31 ++-
arch/arm/boot/dts/omap3.dtsi | 132 +++++++++--
arch/arm/boot/dts/omap3430-sdp.dts | 190 +++++++++++++++
arch/arm/boot/dts/omap34xx.dtsi | 28 +++
arch/arm/boot/dts/omap36xx.dtsi | 13 +
arch/arm/boot/dts/omap4-panda-a4.dts | 5 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 251 ++++++++++++++++++++
arch/arm/boot/dts/omap4-panda-es.dts | 5 +-
arch/arm/boot/dts/omap4-panda.dts | 201 +----------------
arch/arm/boot/dts/omap4-sdp.dts | 74 ++++++-
arch/arm/boot/dts/omap4-var-som.dts | 2 +-
arch/arm/boot/dts/omap4.dtsi | 135 +++++++++--
arch/arm/boot/dts/omap443x.dtsi | 27 ++
arch/arm/boot/dts/omap4460.dtsi | 32 +++
arch/arm/boot/dts/omap5-evm.dts | 110 +++++++++-
arch/arm/boot/dts/omap5.dtsi | 245 ++++++++++++++++---
arch/arm/boot/dts/twl4030.dtsi | 18 ++-
arch/arm/boot/dts/twl6030.dtsi | 12 +
arch/arm/mach-omap2/board-generic.c | 1 +
arch/arm/mach-omap2/omap_hwmod.c | 48 ++++-
arch/arm/mach-omap2/pmu.c | 14 +-
arch/arm/mach-omap2/timer.c | 7 +-
arch/arm/plat-omap/dmtimer.c | 241 +++++++++++--------
arch/arm/plat-omap/include/plat/dmtimer.h | 1 +
46 files changed, 2167 insertions(+), 455 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-devkit8000.dts
create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi
create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts
create mode 100644 arch/arm/boot/dts/omap3-igep0030.dts
create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
create mode 100644 arch/arm/boot/dts/omap34xx.dtsi
create mode 100644 arch/arm/boot/dts/omap4-panda-common.dtsi
create mode 100644 arch/arm/boot/dts/omap443x.dtsi
create mode 100644 arch/arm/boot/dts/omap4460.dtsi
WARNING: multiple messages have this Message-ID (diff)
From: b-cousson@ti.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] ARM: OMAP: Device Tree for 3.10
Date: Tue, 9 Apr 2013 00:46:13 +0200 [thread overview]
Message-ID: <516348B5.3060400@ti.com> (raw)
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.10.
Note that the branch is based on two other branches:
- omap-devel-b-for-3.10 from Paul to get the AM33xx missing hwmod and thus avoid a regression with Santosh's hwmod cleanup including in this DT series [1]. It avoids breaking bisect if this series is merged before Paul's fixes.
- omap-for-v3.10/usb branch to avoid nasty merge conflict in omap3.dtsi and omap4.dtsi due to the DTS patches contains in the USB branch.
Regards,
Benoit
[1] https://patchwork.kernel.org/patch/2366291/
---
The following changes since commit 5852264f9d6139751796853fdfca9d5230cbfb97:
Benoit Cousson (1):
Merge tag 'omap-devel-b-for-3.10' of git://git.kernel.org/.../pjw/omap-pending into for_3.10/dts_merged
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.10/dts
Anil Kumar (3):
ARM: dts: Add minimal DT support for DevKit8000
ARM: dts: omap3-devkit8000: Enable audio support
ARM: dts: omap3-devkit8000: Add NAND DT node
AnilKumar Ch (3):
ARM: dts: AM33XX: Rename I2C and GPIO nodes
ARM: dts: AM33XX: Add d_can instances to aliases
ARM: dts: AM33XX: Add memory resource to d_can node
Felipe Balbi (1):
ARM: dts: OMAP5: Add SPI nodes
Florian Vaussard (3):
ARM: dts: omap3-overo: Add support for pwm-leds
ARM: dts: omap3-overo: Add audio support
ARM: dts: OMAP3: Add GPMC controller
Javier Martinez Canillas (5):
ARM: dts: omap3: Add generic DT support for IGEP devices
ARM: dts: omap3: Add support for IGEPv2 board
ARM: dts: omap3: Add support for IGEP COM Module
ARM: dts: OMAP3: reduce GPMC mapped registers address space
Documentation: dt: gpio-omap: Move interrupt-controller from #interrupt-cells description
Jon Hunter (16):
ARM: OMAP2+: Prepare for device-tree PMU support
ARM: dts: OMAP2+: Add PMU nodes
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5
ARM: dts: Add OMAP2 gpio bindings
ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
ARM: dts: OMAP3: Add reg and interrupt properties for gpio
ARM: dts: OMAP3: Add support for OMAP3430 SDP board
ARM: OMAP: Force dmtimer restore if context loss is not detectable
ARM: OMAP: Add function to request timer by node
ARM: dts: OMAP2+: Update DMTIMER compatibility property
ARM: OMAP2+: Populate DMTIMER errata when using device-tree
ARM: dts: OMAP2+: Identify GPIO banks that are always powered
ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties
ARM: dts: Add NOR flash bindings for OMAP2420 H4
ARM: dts: Add OMAP3430 SDP NOR flash memory binding
Kishon Vijay Abraham I (7):
ARM: dts: OMAP4: Add omap control usb data
ARM: dts: OMAP4: Add omap-usb2 data
ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards
ARM: dts: OMAP5: Add OMAP control usb data
ARM: dts: OMAP5: Add ocp2scp data
ARM: dts: OMAP5: Add omap-usb3 and omap-usb2 data
ARM: dts: OMAP5: add dwc3 omap and dwc3 core data
Lokesh Vutla (1):
ARM: dts: OMAP5: Add watchdog timer node
Matthias Brugger (1):
ARM: dts: omap3-igep: Add uart1 and uart2 to igep boards
NeilBrown (1):
ARM: OMAP: Simplify dmtimer context-loss handling
Nishanth Menon (6):
ARM: dts: OMAP34xx/35xx: Add CPU OPP table
ARM: dts: OMAP36xx: Add CPU OPP table
ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU
ARM: dts: OMAP443x: Add CPU OPP table
ARM: dts: omap4-panda: move generic sections to panda-common
ARM: dts: OMAP4460: Add CPU OPP table
Peter Ujfalusi (5):
ARM: dts: twl4030: Add PWM support
ARM: dts: twl6030: Add PWM support
ARM: dts: omap3-beagle-xm: Use pwm-leds for pmu_stat LED
ARM: dts: omap4-sdp: Add support for pwm-leds (keypad and charging LED)
ARM: dts: omap4-sdp: Add support for pwm-backlight
Philip Avinash (1):
ARM: dts: AM33XX: Corrects typo in interrupt field in SPI node
Rajendra Nayak (1):
ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer
Santosh Shilimkar (9):
ARM: dts: omap5-evm: Update available memory to 2032 MB
ARM: dts: OMAP5: Align the local timer dt node as per the current binding code
ARM: dts: OMAP5: Move the gic node out of ocp space
ARM: dts: OMAP5: Update the timer and GIC nodes for HYP kernel support
ARM: dts: OMAP5: Update keypad reg property
Documentation: dt: OMAP: l3-noc: Add *reg* in required properties
ARM: dts: OMAP4/5: Update l3-noc DT nodes
ARM: OMAP2+: hwmod: extract module address space from DT blob
ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc
Sebastien Guiriec (1):
ARM: dts: OMAP2+: Add SDMA Audio IPs bindings
Sourav Poddar (4):
ARM: dts: omap4-sdp: Add I2c pinctrl data
ARM: dts: omap5-evm: Add I2c pinctrl data
ARM: dts: omap4-panda: Add I2c pinctrl data
ARM: dts: omap5-evm: Add mcspi data
.../devicetree/bindings/arm/omap/l3-noc.txt | 1 +
.../devicetree/bindings/arm/omap/timer.txt | 17 ++-
.../devicetree/bindings/gpio/gpio-omap.txt | 8 +-
Documentation/devicetree/bindings/usb/omap-usb.txt | 1 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/am335x-bone.dts | 10 +-
arch/arm/boot/dts/am335x-evm.dts | 18 +-
arch/arm/boot/dts/am335x-evmsk.dts | 18 +-
arch/arm/boot/dts/am33xx.dtsi | 40 ++--
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/omap2.dtsi | 39 +++-
arch/arm/boot/dts/omap2420-h4.dts | 46 ++++
arch/arm/boot/dts/omap2420.dtsi | 67 +++++-
arch/arm/boot/dts/omap2430.dtsi | 87 +++++++-
arch/arm/boot/dts/omap3-beagle-xm.dts | 26 ++-
arch/arm/boot/dts/omap3-beagle.dts | 8 +-
arch/arm/boot/dts/omap3-devkit8000.dts | 169 +++++++++++++
arch/arm/boot/dts/omap3-evm.dts | 14 +-
arch/arm/boot/dts/omap3-igep.dtsi | 122 ++++++++++
arch/arm/boot/dts/omap3-igep0020.dts | 56 +++++
arch/arm/boot/dts/omap3-igep0030.dts | 44 ++++
arch/arm/boot/dts/omap3-overo.dtsi | 31 ++-
arch/arm/boot/dts/omap3.dtsi | 132 +++++++++--
arch/arm/boot/dts/omap3430-sdp.dts | 190 +++++++++++++++
arch/arm/boot/dts/omap34xx.dtsi | 28 +++
arch/arm/boot/dts/omap36xx.dtsi | 13 +
arch/arm/boot/dts/omap4-panda-a4.dts | 5 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 251 ++++++++++++++++++++
arch/arm/boot/dts/omap4-panda-es.dts | 5 +-
arch/arm/boot/dts/omap4-panda.dts | 201 +----------------
arch/arm/boot/dts/omap4-sdp.dts | 74 ++++++-
arch/arm/boot/dts/omap4-var-som.dts | 2 +-
arch/arm/boot/dts/omap4.dtsi | 135 +++++++++--
arch/arm/boot/dts/omap443x.dtsi | 27 ++
arch/arm/boot/dts/omap4460.dtsi | 32 +++
arch/arm/boot/dts/omap5-evm.dts | 110 +++++++++-
arch/arm/boot/dts/omap5.dtsi | 245 ++++++++++++++++---
arch/arm/boot/dts/twl4030.dtsi | 18 ++-
arch/arm/boot/dts/twl6030.dtsi | 12 +
arch/arm/mach-omap2/board-generic.c | 1 +
arch/arm/mach-omap2/omap_hwmod.c | 48 ++++-
arch/arm/mach-omap2/pmu.c | 14 +-
arch/arm/mach-omap2/timer.c | 7 +-
arch/arm/plat-omap/dmtimer.c | 241 +++++++++++--------
arch/arm/plat-omap/include/plat/dmtimer.h | 1 +
46 files changed, 2167 insertions(+), 455 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-devkit8000.dts
create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi
create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts
create mode 100644 arch/arm/boot/dts/omap3-igep0030.dts
create mode 100644 arch/arm/boot/dts/omap3430-sdp.dts
create mode 100644 arch/arm/boot/dts/omap34xx.dtsi
create mode 100644 arch/arm/boot/dts/omap4-panda-common.dtsi
create mode 100644 arch/arm/boot/dts/omap443x.dtsi
create mode 100644 arch/arm/boot/dts/omap4460.dtsi
next reply other threads:[~2013-04-08 22:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 22:46 Benoit Cousson [this message]
2013-04-08 22:46 ` [GIT PULL] ARM: OMAP: Device Tree for 3.10 Benoit Cousson
2013-04-09 0:15 ` Tony Lindgren
2013-04-09 0:15 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=516348B5.3060400@ti.com \
--to=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.