From: nsekhar@ti.com (Sekhar Nori)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
Date: Fri, 12 Apr 2013 16:50:25 +0530 [thread overview]
Message-ID: <5167EDF9.5070009@ti.com> (raw)
In-Reply-To: <1365764734-16515-1-git-send-email-prabhakar.csengg@gmail.com>
On 4/12/2013 4:35 PM, Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
> respectively as this are the proper video standards.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Sekhar Nori <nsekhar@ti.com>
I assume you have tested it, some testing information would have been
good. The patch as such is OK with me. I assume this will go through
media tree for sake of dependencies.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Thanks,
Sekhar
> ---
> Note:- This patch is on top of following pull
> https://patchwork.linuxtv.org/patch/17888/
>
> arch/arm/mach-davinci/board-dm355-evm.c | 4 ++--
> arch/arm/mach-davinci/board-dm365-evm.c | 4 ++--
> arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++--
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
> index 1043506..886481c 100644
> --- a/arch/arm/mach-davinci/board-dm355-evm.c
> +++ b/arch/arm/mach-davinci/board-dm355-evm.c
> @@ -247,7 +247,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -259,7 +259,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
> index 0518ce5..2a66743 100644
> --- a/arch/arm/mach-davinci/board-dm365-evm.c
> +++ b/arch/arm/mach-davinci/board-dm365-evm.c
> @@ -381,7 +381,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -393,7 +393,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index a021800..745280d 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -622,7 +622,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -634,7 +634,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
>
WARNING: multiple messages have this Message-ID (diff)
From: Sekhar Nori <nsekhar@ti.com>
To: Prabhakar lad <prabhakar.csengg@gmail.com>
Cc: DLOS <davinci-linux-open-source@linux.davincidsp.com>,
LMML <linux-kernel@vger.kernel.org>,
LAK <linux-arm-kernel@lists.infradead.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
LKML <inux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
Date: Fri, 12 Apr 2013 16:50:25 +0530 [thread overview]
Message-ID: <5167EDF9.5070009@ti.com> (raw)
In-Reply-To: <1365764734-16515-1-git-send-email-prabhakar.csengg@gmail.com>
On 4/12/2013 4:35 PM, Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
> respectively as this are the proper video standards.
>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Sekhar Nori <nsekhar@ti.com>
I assume you have tested it, some testing information would have been
good. The patch as such is OK with me. I assume this will go through
media tree for sake of dependencies.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Thanks,
Sekhar
> ---
> Note:- This patch is on top of following pull
> https://patchwork.linuxtv.org/patch/17888/
>
> arch/arm/mach-davinci/board-dm355-evm.c | 4 ++--
> arch/arm/mach-davinci/board-dm365-evm.c | 4 ++--
> arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++--
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
> index 1043506..886481c 100644
> --- a/arch/arm/mach-davinci/board-dm355-evm.c
> +++ b/arch/arm/mach-davinci/board-dm355-evm.c
> @@ -247,7 +247,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -259,7 +259,7 @@ static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
> diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
> index 0518ce5..2a66743 100644
> --- a/arch/arm/mach-davinci/board-dm365-evm.c
> +++ b/arch/arm/mach-davinci/board-dm365-evm.c
> @@ -381,7 +381,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -393,7 +393,7 @@ static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
> diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
> index a021800..745280d 100644
> --- a/arch/arm/mach-davinci/board-dm644x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> @@ -622,7 +622,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
> {
> .name = "ntsc",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_525_60,
> + .std_id = V4L2_STD_NTSC,
> .interlaced = 1,
> .xres = 720,
> .yres = 480,
> @@ -634,7 +634,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
> {
> .name = "pal",
> .timings_type = VPBE_ENC_STD,
> - .std_id = V4L2_STD_625_50,
> + .std_id = V4L2_STD_PAL,
> .interlaced = 1,
> .xres = 720,
> .yres = 576,
>
next prev parent reply other threads:[~2013-04-12 11:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-12 11:05 [PATCH] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL Prabhakar lad
2013-04-12 11:05 ` Prabhakar lad
2013-04-12 11:20 ` Sekhar Nori [this message]
2013-04-12 11:20 ` Sekhar Nori
2013-04-12 11:26 ` Prabhakar Lad
2013-04-12 11:26 ` Prabhakar Lad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5167EDF9.5070009@ti.com \
--to=nsekhar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.