All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
Date: Fri, 12 Apr 2013 18:11:59 +0000	[thread overview]
Message-ID: <51684E6F.5030009@cogentembedded.com> (raw)
In-Reply-To: <20130412003457.GC24461@verge.net.au>

Hello.

On 04/12/2013 04:34 AM, Simon Horman wrote:

>>>>>>>     Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
>>>>>>> 'renesas-next-20130410' tag.  It was created to fix the shortcomings in the
>>>>>>> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
>>>>>>> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
>>>>>>> to touch both subtrees). The patches were conceived with the complete
>>>>>>> bisectability goal in mind.
>>>>>>> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
>>>>>>> [2/9] ehci-platform: add pre_setup() method to platform data
>>>>>>> [3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer
>>>>>>> [4/9] rcar-phy: remove EHCI internal buffer setup
>>>>>>> [5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource
>>>>>>> [6/9] rcar-phy: correct base address
>>>>>>> [7/9] rcar-phy: add platform data
>>>>>>> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
>>>>>>> [9/9] rcar-phy: handle platform data
>>>>>>>     I'm not sure thru which tree this patchset should be merged, however it turns
>>>>>>> out that it's too late now to push it thru Felipe Balbi's USB tree for 3.10
>>>>>>> (which would have been most convenient probably), and it's probably too late to
>>>>>>> merge thru Simon's tree for 3.10 too. So it now have to be postponed to 3.11,
>>>>>>> unfortunately...
>>>>>> Felipe, how would you prefer to handle this?
>>>>>> I'm happy for you to take it or to take it myself.
>>>>> please take it yourself, just keep in mind there will be conflicts, I
>>>>> will go over the patches now and give my Acked-by so you can queue them
>>>>> up.
>>>> Thanks
>>> Sergei, it looks like patches 1-7 are clear.
>>     #7 & #9 have been refused by Felipe (hence #8 isn't good too).
>>
>>> Do you want me to start queueing them up.
>>     I was going to repost the whole series soon, adding ACK from Alan

    It's not as soon as I had hoped but I hope I would be able to do it
in several hours...

>> to the patch #2 and resolving issues with patches #7..#9. It's worth
>> waiting for that to happen I think.
> I am quite happy to wait.
>
> One minor comment - there is no need to repost just to fix this -
> could you consider using lower-case for the socs for consistency
> with the common practice in patch subject lines.
>
> e.g.: ARM: shmobile: r8a7779: setup EHCI

     Alright, although I have a kind of idiosyncrasy to lowercasing 
otherwise
uppercase names.

>
>>> Or would you rather wait for the issue with patch 6 to be resolved?
>>     There's no special issue with patch #6 other than the PHY driver
>> files being renamed in Felipe's tree -- but that concerns all
>> patches touching drivers/usb/phy/rcar-phy.c (some of which precede
>> #6).
> Sorry, I made an error. I meant #8 and in turn #9.

    The issues start at patch #7 actually, where the platform data
represenation seemed inappropriate to Felipe.

>
>>     I don't know how the rename conflict will be handled (this is
>> really bad coincidence), perhaps I still should have done this
>> patchset against Felipe's 'next' branch and pushed it thru his tree.
>> If the patches will be queued for 3.11 anyway, maybe it's worth
>> doing that -- I'm still of the opinion that his tree would be the
>> one most fitting for this patchset.
> It seems that git will handle it :)

     Well, let's hope. There's still an issue with header file name it
wouldn't be able to handle but I'll probably leave it as is, as the other
PHY files in include/linux/usb/ didn't get renamed in the big rename.

WBR, Sergei


WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
Date: Fri, 12 Apr 2013 22:11:59 +0400	[thread overview]
Message-ID: <51684E6F.5030009@cogentembedded.com> (raw)
In-Reply-To: <20130412003457.GC24461@verge.net.au>

Hello.

On 04/12/2013 04:34 AM, Simon Horman wrote:

>>>>>>>     Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
>>>>>>> 'renesas-next-20130410' tag.  It was created to fix the shortcomings in the
>>>>>>> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
>>>>>>> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
>>>>>>> to touch both subtrees). The patches were conceived with the complete
>>>>>>> bisectability goal in mind.
>>>>>>> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
>>>>>>> [2/9] ehci-platform: add pre_setup() method to platform data
>>>>>>> [3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer
>>>>>>> [4/9] rcar-phy: remove EHCI internal buffer setup
>>>>>>> [5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource
>>>>>>> [6/9] rcar-phy: correct base address
>>>>>>> [7/9] rcar-phy: add platform data
>>>>>>> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
>>>>>>> [9/9] rcar-phy: handle platform data
>>>>>>>     I'm not sure thru which tree this patchset should be merged, however it turns
>>>>>>> out that it's too late now to push it thru Felipe Balbi's USB tree for 3.10
>>>>>>> (which would have been most convenient probably), and it's probably too late to
>>>>>>> merge thru Simon's tree for 3.10 too. So it now have to be postponed to 3.11,
>>>>>>> unfortunately...
>>>>>> Felipe, how would you prefer to handle this?
>>>>>> I'm happy for you to take it or to take it myself.
>>>>> please take it yourself, just keep in mind there will be conflicts, I
>>>>> will go over the patches now and give my Acked-by so you can queue them
>>>>> up.
>>>> Thanks
>>> Sergei, it looks like patches 1-7 are clear.
>>     #7 & #9 have been refused by Felipe (hence #8 isn't good too).
>>
>>> Do you want me to start queueing them up.
>>     I was going to repost the whole series soon, adding ACK from Alan

    It's not as soon as I had hoped but I hope I would be able to do it
in several hours...

>> to the patch #2 and resolving issues with patches #7..#9. It's worth
>> waiting for that to happen I think.
> I am quite happy to wait.
>
> One minor comment - there is no need to repost just to fix this -
> could you consider using lower-case for the socs for consistency
> with the common practice in patch subject lines.
>
> e.g.: ARM: shmobile: r8a7779: setup EHCI

     Alright, although I have a kind of idiosyncrasy to lowercasing 
otherwise
uppercase names.

>
>>> Or would you rather wait for the issue with patch 6 to be resolved?
>>     There's no special issue with patch #6 other than the PHY driver
>> files being renamed in Felipe's tree -- but that concerns all
>> patches touching drivers/usb/phy/rcar-phy.c (some of which precede
>> #6).
> Sorry, I made an error. I meant #8 and in turn #9.

    The issues start at patch #7 actually, where the platform data
represenation seemed inappropriate to Felipe.

>
>>     I don't know how the rename conflict will be handled (this is
>> really bad coincidence), perhaps I still should have done this
>> patchset against Felipe's 'next' branch and pushed it thru his tree.
>> If the patches will be queued for 3.11 anyway, maybe it's worth
>> doing that -- I'm still of the opinion that his tree would be the
>> one most fitting for this patchset.
> It seems that git will handle it :)

     Well, let's hope. There's still an issue with header file name it
wouldn't be able to handle but I'll probably leave it as is, as the other
PHY files in include/linux/usb/ didn't get renamed in the big rename.

WBR, Sergei

  reply	other threads:[~2013-04-12 18:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-09 22:26 [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code Sergei Shtylyov
2013-04-09 22:26 ` Sergei Shtylyov
2013-04-10  4:49 ` Simon Horman
2013-04-10  4:49   ` Simon Horman
2013-04-10  8:50   ` Felipe Balbi
2013-04-10  8:50     ` Felipe Balbi
2013-04-10  9:05     ` Simon Horman
2013-04-10  9:05       ` Simon Horman
2013-04-11  0:51       ` Simon Horman
2013-04-11  0:51         ` Simon Horman
2013-04-11 12:02         ` Sergei Shtylyov
2013-04-11 12:02           ` Sergei Shtylyov
2013-04-11 12:06           ` Felipe Balbi
2013-04-11 12:06             ` Felipe Balbi
2013-04-11 12:20             ` Sergei Shtylyov
2013-04-11 12:20               ` Sergei Shtylyov
2013-04-12  0:34           ` Simon Horman
2013-04-12  0:34             ` Simon Horman
2013-04-12 18:11             ` Sergei Shtylyov [this message]
2013-04-12 18:11               ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51684E6F.5030009@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.