* [PATCH V3 02/14] MIPS: ralink: add RT3352 register defines
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-14 7:27 ` Gabor Juhos
2013-04-13 8:48 ` [PATCH V3 03/14] MIPS: ralink: fix RT305x clock setup John Crispin
` (11 subsequent siblings)
12 siblings, 1 reply; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add a few missing defines that are needed to make USB and clock detection work
on the RT3352.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/rt305x.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 7d344f2..e36c3c5 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -136,4 +136,17 @@ static inline int soc_is_rt5350(void)
#define RT305X_GPIO_MODE_SDRAM BIT(8)
#define RT305X_GPIO_MODE_RGMII BIT(9)
+#define RT3352_SYSC_REG_SYSCFG0 0x010
+#define RT3352_SYSC_REG_SYSCFG1 0x014
+#define RT3352_SYSC_REG_CLKCFG1 0x030
+#define RT3352_SYSC_REG_RSTCTRL 0x034
+#define RT3352_SYSC_REG_USB_PS 0x05c
+
+#define RT3352_CLKCFG0_XTAL_SEL BIT(20)
+#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
+#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT3352_RSTCTRL_UHST BIT(22)
+#define RT3352_RSTCTRL_UDEV BIT(25)
+#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
+
#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 03/14] MIPS: ralink: fix RT305x clock setup
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
2013-04-13 8:48 ` [PATCH V3 02/14] MIPS: ralink: add RT3352 register defines John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-14 7:28 ` Gabor Juhos
2013-04-13 8:48 ` [PATCH V3 04/14] MIPS: ralink: add missing comment in irq driver John Crispin
` (10 subsequent siblings)
12 siblings, 1 reply; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add a few missing clocks.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/rt305x.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 0a4bbdc..5d49a54 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -124,6 +124,8 @@ struct ralink_pinmux gpio_pinmux = {
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+ unsigned long wmac_rate = 40000000;
+
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
if (soc_is_rt305x() || soc_is_rt3350()) {
@@ -176,11 +178,21 @@ void __init ralink_clk_init(void)
BUG();
}
+ if (soc_is_rt3352() || soc_is_rt5350()) {
+ u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
+
+ if (!(val & RT3352_CLKCFG0_XTAL_SEL))
+ wmac_rate = 20000000;
+ }
+
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
+ ralink_clk_add("10000120.watchdog", wdt_rate);
ralink_clk_add("10000500.uart", uart_rate);
ralink_clk_add("10000c00.uartlite", uart_rate);
+ ralink_clk_add("10100000.ethernet", sys_rate);
+ ralink_clk_add("10180000.wmac", wmac_rate);
}
void __init ralink_of_remap(void)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 04/14] MIPS: ralink: add missing comment in irq driver
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
2013-04-13 8:48 ` [PATCH V3 02/14] MIPS: ralink: add RT3352 register defines John Crispin
2013-04-13 8:48 ` [PATCH V3 03/14] MIPS: ralink: fix RT305x clock setup John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 05/14] MIPS: ralink: add RT5350 sdram register defines John Crispin
` (9 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Trivial patch that adds a comment that makes the code more readable.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ralink/irq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index d9807d0..320b1f1 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -166,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
irq_set_chained_handler(irq, ralink_intc_irq_handler);
irq_set_handler_data(irq, domain);
+ /* tell the kernel which irq is used for performance monitoring */
cp0_perfcount_irq = irq_create_mapping(domain, 9);
return 0;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 05/14] MIPS: ralink: add RT5350 sdram register defines
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (2 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 04/14] MIPS: ralink: add missing comment in irq driver John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 06/14] MIPS: ralink: make early_printk work on RT2880 John Crispin
` (8 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add a few missing defines that are needed to make memory detection work on the
RT5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/include/asm/mach-ralink/rt305x.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index e36c3c5..80cda8a 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -97,6 +97,14 @@ static inline int soc_is_rt5350(void)
#define RT5350_SYSCFG0_CPUCLK_320 0x2
#define RT5350_SYSCFG0_CPUCLK_300 0x3
+#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12
+#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7
+#define RT5350_SYSCFG0_DRAM_SIZE_2M 0
+#define RT5350_SYSCFG0_DRAM_SIZE_8M 1
+#define RT5350_SYSCFG0_DRAM_SIZE_16M 2
+#define RT5350_SYSCFG0_DRAM_SIZE_32M 3
+#define RT5350_SYSCFG0_DRAM_SIZE_64M 4
+
/* multi function gpio pins */
#define RT305X_GPIO_I2C_SD 1
#define RT305X_GPIO_I2C_SCLK 2
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 06/14] MIPS: ralink: make early_printk work on RT2880
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (3 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 05/14] MIPS: ralink: add RT5350 sdram register defines John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 07/14] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux John Crispin
` (7 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
RT2880 has a different location for the early serial port.
Signed-off-by: John Crispin <blogic@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
---
arch/mips/ralink/early_printk.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index c4ae47e..b46d041 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -11,7 +11,11 @@
#include <asm/addrspace.h>
+#ifdef CONFIG_SOC_RT288X
+#define EARLY_UART_BASE 0x300c00
+#else
#define EARLY_UART_BASE 0x10000c00
+#endif
#define UART_REG_RX 0x00
#define UART_REG_TX 0x04
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 07/14] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (4 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 06/14] MIPS: ralink: make early_printk work on RT2880 John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 08/14] MIPS: ralink: make the rt305x pinmuxing structure static John Crispin
` (6 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add proper namespacing to the variable.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/common.h | 2 +-
arch/mips/ralink/rt305x.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index 3009903..f4b19c6 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -24,7 +24,7 @@ struct ralink_pinmux {
int uart_shift;
void (*wdt_reset)(void);
};
-extern struct ralink_pinmux gpio_pinmux;
+extern struct ralink_pinmux rt_gpio_pinmux;
struct ralink_soc_info {
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 5d49a54..f1a6c33 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -114,7 +114,7 @@ void rt305x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
}
-struct ralink_pinmux gpio_pinmux = {
+struct ralink_pinmux rt_gpio_pinmux = {
.mode = mode_mux,
.uart = uart_mux,
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 08/14] MIPS: ralink: make the rt305x pinmuxing structure static
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (5 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 07/14] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 09/14] MIPS: ralink: add pci group to struct ralink_pinmux John Crispin
` (5 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can
hence be static.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/rt305x.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index f1a6c33..5b42078 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -22,7 +22,7 @@
enum rt305x_soc_type rt305x_soc;
-struct ralink_pinmux_grp mode_mux[] = {
+static struct ralink_pinmux_grp mode_mux[] = {
{
.name = "i2c",
.mask = RT305X_GPIO_MODE_I2C,
@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = {
}, {0}
};
-struct ralink_pinmux_grp uart_mux[] = {
+static struct ralink_pinmux_grp uart_mux[] = {
{
.name = "uartf",
.mask = RT305X_GPIO_MODE_UARTF,
@@ -103,7 +103,7 @@ struct ralink_pinmux_grp uart_mux[] = {
}, {0}
};
-void rt305x_wdt_reset(void)
+static void rt305x_wdt_reset(void)
{
u32 t;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 09/14] MIPS: ralink: add pci group to struct ralink_pinmux
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (6 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 08/14] MIPS: ralink: make the rt305x pinmuxing structure static John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 10/14] MIPS: ralink: add uart mask " John Crispin
` (4 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, Gabor Juhos
From: Gabor Juhos <juhosg@openwrt.org>
This will be used for RT3662/RT3883.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/common.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index f4b19c6..bebd149 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -23,6 +23,9 @@ struct ralink_pinmux {
struct ralink_pinmux_grp *uart;
int uart_shift;
void (*wdt_reset)(void);
+ struct ralink_pinmux_grp *pci;
+ int pci_shift;
+ u32 pci_mask;
};
extern struct ralink_pinmux rt_gpio_pinmux;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 10/14] MIPS: ralink: add uart mask to struct ralink_pinmux
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (7 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 09/14] MIPS: ralink: add pci group to struct ralink_pinmux John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-13 8:48 ` [PATCH V3 11/14] MIPS: ralink: adds support for RT2880 SoC family John Crispin
` (3 subsequent siblings)
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add a field for the uart muxing mask and set it inside the rt305x setup code.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/common.h | 1 +
arch/mips/ralink/rt305x.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index bebd149..299119b 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -22,6 +22,7 @@ struct ralink_pinmux {
struct ralink_pinmux_grp *mode;
struct ralink_pinmux_grp *uart;
int uart_shift;
+ u32 uart_mask;
void (*wdt_reset)(void);
struct ralink_pinmux_grp *pci;
int pci_shift;
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 5b42078..e9dbf8c 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -118,6 +118,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
.mode = mode_mux,
.uart = uart_mux,
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT305X_GPIO_MODE_GPIO,
.wdt_reset = rt305x_wdt_reset,
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 11/14] MIPS: ralink: adds support for RT2880 SoC family
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (8 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 10/14] MIPS: ralink: add uart mask " John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-14 7:37 ` Gabor Juhos
2013-04-13 8:48 ` [PATCH V3 12/14] MIPS: ralink: adds support for RT3883 " John Crispin
` (2 subsequent siblings)
12 siblings, 1 reply; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add support code for rt2880 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/Kconfig | 2 +-
arch/mips/include/asm/mach-ralink/rt288x.h | 49 ++++++++++
arch/mips/ralink/Kconfig | 3 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/rt288x.c | 139 ++++++++++++++++++++++++++++
6 files changed, 198 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h
create mode 100644 arch/mips/ralink/rt288x.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 27a4bfa..c1997db 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1144,7 +1144,7 @@ config BOOT_ELF32
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
default "6" if MIPS_CPU_SCACHE
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
default "5"
diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h
new file mode 100644
index 0000000..ad8b42d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt288x.h
@@ -0,0 +1,49 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _RT288X_REGS_H_
+#define _RT288X_REGS_H_
+
+#define RT2880_SYSC_BASE 0x00300000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_ID 0x0c
+#define SYSC_REG_SYSTEM_CONFIG 0x10
+#define SYSC_REG_CLKCFG 0x30
+
+#define RT2880_CHIP_NAME0 0x38325452
+#define RT2880_CHIP_NAME1 0x20203038
+
+#define CHIP_ID_ID_MASK 0xff
+#define CHIP_ID_ID_SHIFT 8
+#define CHIP_ID_REV_MASK 0xff
+
+#define SYSTEM_CONFIG_CPUCLK_SHIFT 20
+#define SYSTEM_CONFIG_CPUCLK_MASK 0x3
+#define SYSTEM_CONFIG_CPUCLK_250 0x0
+#define SYSTEM_CONFIG_CPUCLK_266 0x1
+#define SYSTEM_CONFIG_CPUCLK_280 0x2
+#define SYSTEM_CONFIG_CPUCLK_300 0x3
+
+#define RT2880_GPIO_MODE_I2C BIT(0)
+#define RT2880_GPIO_MODE_UART0 BIT(1)
+#define RT2880_GPIO_MODE_SPI BIT(2)
+#define RT2880_GPIO_MODE_UART1 BIT(3)
+#define RT2880_GPIO_MODE_JTAG BIT(4)
+#define RT2880_GPIO_MODE_MDIO BIT(5)
+#define RT2880_GPIO_MODE_SDRAM BIT(6)
+#define RT2880_GPIO_MODE_PCI BIT(7)
+
+#define CLKCFG_SRAM_CS_N_WDT BIT(9)
+
+#endif
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index a0b0197..6723b94 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -6,6 +6,9 @@ choice
help
Select Ralink MIPS SoC type.
+ config SOC_RT288X
+ bool "RT288x"
+
config SOC_RT305X
bool "RT305x"
select USB_ARCH_HAS_HCD
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 939757f..6d826f2 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,6 +8,7 @@
obj-y := prom.o of.o reset.o clk.o irq.o
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6babd65..3f49e51 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -5,6 +5,11 @@ core-$(CONFIG_RALINK) += arch/mips/ralink/
cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
#
+# Ralink RT288x
+#
+load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
+
+#
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
new file mode 100644
index 0000000..1e0788e
--- /dev/null
+++ b/arch/mips/ralink/rt288x.c
@@ -0,0 +1,139 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt288x.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT2880_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = RT2880_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = RT2880_GPIO_MODE_UART0,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "jtag",
+ .mask = RT2880_GPIO_MODE_JTAG,
+ .gpio_first = 17,
+ .gpio_last = 21,
+ }, {
+ .name = "mdio",
+ .mask = RT2880_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "sdram",
+ .mask = RT2880_GPIO_MODE_SDRAM,
+ .gpio_first = 24,
+ .gpio_last = 39,
+ }, {
+ .name = "pci",
+ .mask = RT2880_GPIO_MODE_PCI,
+ .gpio_first = 40,
+ .gpio_last = 71,
+ }, {0}
+};
+
+static void rt288x_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on pin SRAM_CS_N */
+ t = rt_sysc_r32(SYSC_REG_CLKCFG);
+ t |= CLKCFG_SRAM_CS_N_WDT;
+ rt_sysc_w32(t, SYSC_REG_CLKCFG);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .wdt_reset = rt288x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+ switch (t) {
+ case SYSTEM_CONFIG_CPUCLK_250:
+ cpu_rate = 250000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_266:
+ cpu_rate = 266666667;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_280:
+ cpu_rate = 280000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_300:
+ cpu_rate = 300000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("300100.timer", cpu_rate / 2);
+ ralink_clk_add("300120.watchdog", cpu_rate / 2);
+ ralink_clk_add("300500.uart", cpu_rate / 2);
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+ if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
+ soc_info->compatible = "ralink,r2880-soc";
+ name = "RT2880";
+ } else {
+ panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s id:%u rev:%u",
+ name,
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ (id & CHIP_ID_REV_MASK));
+}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 12/14] MIPS: ralink: adds support for RT3883 SoC family
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (9 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 11/14] MIPS: ralink: adds support for RT2880 SoC family John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-14 7:41 ` Gabor Juhos
2013-04-13 8:48 ` [PATCH V3 13/14] MIPS: ralink: adds support for MT7620 " John Crispin
2013-04-13 8:48 ` [PATCH V3 14/14] MIPS: ralink: add cpu-feature-overrides.h John Crispin
12 siblings, 1 reply; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add support code for rt3883 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/rt3883.h | 247 ++++++++++++++++++++++++++++
arch/mips/ralink/Kconfig | 5 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/rt3883.c | 244 +++++++++++++++++++++++++++
5 files changed, 502 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
create mode 100644 arch/mips/ralink/rt3883.c
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
new file mode 100644
index 0000000..b91c6c1
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -0,0 +1,247 @@
+/*
+ * Ralink RT3662/RT3883 SoC register definitions
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_REGS_H_
+#define _RT3883_REGS_H_
+
+#include <linux/bitops.h>
+
+#define RT3883_SDRAM_BASE 0x00000000
+#define RT3883_SYSC_BASE 0x10000000
+#define RT3883_TIMER_BASE 0x10000100
+#define RT3883_INTC_BASE 0x10000200
+#define RT3883_MEMC_BASE 0x10000300
+#define RT3883_UART0_BASE 0x10000500
+#define RT3883_PIO_BASE 0x10000600
+#define RT3883_FSCC_BASE 0x10000700
+#define RT3883_NANDC_BASE 0x10000810
+#define RT3883_I2C_BASE 0x10000900
+#define RT3883_I2S_BASE 0x10000a00
+#define RT3883_SPI_BASE 0x10000b00
+#define RT3883_UART1_BASE 0x10000c00
+#define RT3883_PCM_BASE 0x10002000
+#define RT3883_GDMA_BASE 0x10002800
+#define RT3883_CODEC1_BASE 0x10003000
+#define RT3883_CODEC2_BASE 0x10003800
+#define RT3883_FE_BASE 0x10100000
+#define RT3883_ROM_BASE 0x10118000
+#define RT3883_USBDEV_BASE 0x10112000
+#define RT3883_PCI_BASE 0x10140000
+#define RT3883_WLAN_BASE 0x10180000
+#define RT3883_USBHOST_BASE 0x101c0000
+#define RT3883_BOOT_BASE 0x1c000000
+#define RT3883_SRAM_BASE 0x1e000000
+#define RT3883_PCIMEM_BASE 0x20000000
+
+#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE)
+#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000)
+
+#define RT3883_SYSC_SIZE 0x100
+#define RT3883_TIMER_SIZE 0x100
+#define RT3883_INTC_SIZE 0x100
+#define RT3883_MEMC_SIZE 0x100
+#define RT3883_UART0_SIZE 0x100
+#define RT3883_UART1_SIZE 0x100
+#define RT3883_PIO_SIZE 0x100
+#define RT3883_FSCC_SIZE 0x100
+#define RT3883_NANDC_SIZE 0x0f0
+#define RT3883_I2C_SIZE 0x100
+#define RT3883_I2S_SIZE 0x100
+#define RT3883_SPI_SIZE 0x100
+#define RT3883_PCM_SIZE 0x800
+#define RT3883_GDMA_SIZE 0x800
+#define RT3883_CODEC1_SIZE 0x800
+#define RT3883_CODEC2_SIZE 0x800
+#define RT3883_FE_SIZE 0x10000
+#define RT3883_ROM_SIZE 0x4000
+#define RT3883_USBDEV_SIZE 0x4000
+#define RT3883_PCI_SIZE 0x40000
+#define RT3883_WLAN_SIZE 0x40000
+#define RT3883_USBHOST_SIZE 0x40000
+#define RT3883_BOOT_SIZE (32 * 1024 * 1024)
+#define RT3883_SRAM_SIZE (32 * 1024 * 1024)
+
+/* SYSC registers */
+#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */
+#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */
+#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */
+#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */
+#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */
+#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */
+#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */
+#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/
+#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/
+#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */
+#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */
+#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c
+#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80
+#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84
+#define RT3883_SYSC_REG_PMU 0x88
+#define RT3883_SYSC_REG_PMU1 0x8c
+
+#define RT3883_CHIP_NAME0 0x38335452
+#define RT3883_CHIP_NAME1 0x20203338
+
+#define RT3883_REVID_VER_ID_MASK 0x0f
+#define RT3883_REVID_VER_ID_SHIFT 8
+#define RT3883_REVID_ECO_ID_MASK 0x0f
+
+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
+#define RT3883_SYSCFG0_CPUCLK_250 0x0
+#define RT3883_SYSCFG0_CPUCLK_384 0x1
+#define RT3883_SYSCFG0_CPUCLK_480 0x2
+#define RT3883_SYSCFG0_CPUCLK_500 0x3
+
+#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
+#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8)
+#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7)
+#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6)
+#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2)
+
+#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21)
+#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
+#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define RT3883_GPIO_MODE_I2C BIT(0)
+#define RT3883_GPIO_MODE_SPI BIT(1)
+#define RT3883_GPIO_MODE_UART0_SHIFT 2
+#define RT3883_GPIO_MODE_UART0_MASK 0x7
+#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
+#define RT3883_GPIO_MODE_UARTF 0x0
+#define RT3883_GPIO_MODE_PCM_UARTF 0x1
+#define RT3883_GPIO_MODE_PCM_I2S 0x2
+#define RT3883_GPIO_MODE_I2S_UARTF 0x3
+#define RT3883_GPIO_MODE_PCM_GPIO 0x4
+#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
+#define RT3883_GPIO_MODE_GPIO_I2S 0x6
+#define RT3883_GPIO_MODE_GPIO 0x7
+#define RT3883_GPIO_MODE_UART1 BIT(5)
+#define RT3883_GPIO_MODE_JTAG BIT(6)
+#define RT3883_GPIO_MODE_MDIO BIT(7)
+#define RT3883_GPIO_MODE_GE1 BIT(9)
+#define RT3883_GPIO_MODE_GE2 BIT(10)
+#define RT3883_GPIO_MODE_PCI_SHIFT 11
+#define RT3883_GPIO_MODE_PCI_MASK 0x7
+#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
+#define RT3883_GPIO_MODE_LNA_A_SHIFT 16
+#define RT3883_GPIO_MODE_LNA_A_MASK 0x3
+#define _RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
+#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3
+#define RT3883_GPIO_MODE_LNA_A _RT3883_GPIO_MODE_LNA_A(RT3883_GPIO_MODE_LNA_A_MASK)
+#define RT3883_GPIO_MODE_LNA_G_SHIFT 18
+#define RT3883_GPIO_MODE_LNA_G_MASK 0x3
+#define _RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
+#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
+#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
+
+#define RT3883_GPIO_I2C_SD 1
+#define RT3883_GPIO_I2C_SCLK 2
+#define RT3883_GPIO_SPI_CS0 3
+#define RT3883_GPIO_SPI_CLK 4
+#define RT3883_GPIO_SPI_MOSI 5
+#define RT3883_GPIO_SPI_MISO 6
+#define RT3883_GPIO_7 7
+#define RT3883_GPIO_10 10
+#define RT3883_GPIO_14 14
+#define RT3883_GPIO_UART1_TXD 15
+#define RT3883_GPIO_UART1_RXD 16
+#define RT3883_GPIO_JTAG_TDO 17
+#define RT3883_GPIO_JTAG_TDI 18
+#define RT3883_GPIO_JTAG_TMS 19
+#define RT3883_GPIO_JTAG_TCLK 20
+#define RT3883_GPIO_JTAG_TRST_N 21
+#define RT3883_GPIO_MDIO_MDC 22
+#define RT3883_GPIO_MDIO_MDIO 23
+#define RT3883_GPIO_LNA_PE_A0 32
+#define RT3883_GPIO_LNA_PE_A1 33
+#define RT3883_GPIO_LNA_PE_A2 34
+#define RT3883_GPIO_LNA_PE_G0 35
+#define RT3883_GPIO_LNA_PE_G1 36
+#define RT3883_GPIO_LNA_PE_G2 37
+#define RT3883_GPIO_PCI_AD0 40
+#define RT3883_GPIO_PCI_AD31 71
+#define RT3883_GPIO_GE2_TXD0 72
+#define RT3883_GPIO_GE2_TXD1 73
+#define RT3883_GPIO_GE2_TXD2 74
+#define RT3883_GPIO_GE2_TXD3 75
+#define RT3883_GPIO_GE2_TXEN 76
+#define RT3883_GPIO_GE2_TXCLK 77
+#define RT3883_GPIO_GE2_RXD0 78
+#define RT3883_GPIO_GE2_RXD1 79
+#define RT3883_GPIO_GE2_RXD2 80
+#define RT3883_GPIO_GE2_RXD3 81
+#define RT3883_GPIO_GE2_RXDV 82
+#define RT3883_GPIO_GE2_RXCLK 83
+#define RT3883_GPIO_GE1_TXD0 84
+#define RT3883_GPIO_GE1_TXD1 85
+#define RT3883_GPIO_GE1_TXD2 86
+#define RT3883_GPIO_GE1_TXD3 87
+#define RT3883_GPIO_GE1_TXEN 88
+#define RT3883_GPIO_GE1_TXCLK 89
+#define RT3883_GPIO_GE1_RXD0 90
+#define RT3883_GPIO_GE1_RXD1 91
+#define RT3883_GPIO_GE1_RXD2 92
+#define RT3883_GPIO_GE1_RXD3 93
+#define RT3883_GPIO_GE1_RXDV 94
+#define RT3883_GPIO_GE1_RXCLK 95
+
+#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27)
+#define RT3883_RSTCTRL_FLASH BIT(26)
+#define RT3883_RSTCTRL_UDEV BIT(25)
+#define RT3883_RSTCTRL_PCI BIT(24)
+#define RT3883_RSTCTRL_PCIE BIT(23)
+#define RT3883_RSTCTRL_UHST BIT(22)
+#define RT3883_RSTCTRL_FE BIT(21)
+#define RT3883_RSTCTRL_WLAN BIT(20)
+#define RT3883_RSTCTRL_UART1 BIT(29)
+#define RT3883_RSTCTRL_SPI BIT(18)
+#define RT3883_RSTCTRL_I2S BIT(17)
+#define RT3883_RSTCTRL_I2C BIT(16)
+#define RT3883_RSTCTRL_NAND BIT(15)
+#define RT3883_RSTCTRL_DMA BIT(14)
+#define RT3883_RSTCTRL_PIO BIT(13)
+#define RT3883_RSTCTRL_UART BIT(12)
+#define RT3883_RSTCTRL_PCM BIT(11)
+#define RT3883_RSTCTRL_MC BIT(10)
+#define RT3883_RSTCTRL_INTC BIT(9)
+#define RT3883_RSTCTRL_TIMER BIT(8)
+#define RT3883_RSTCTRL_SYS BIT(0)
+
+#define RT3883_INTC_INT_SYSCTL BIT(0)
+#define RT3883_INTC_INT_TIMER0 BIT(1)
+#define RT3883_INTC_INT_TIMER1 BIT(2)
+#define RT3883_INTC_INT_IA BIT(3)
+#define RT3883_INTC_INT_PCM BIT(4)
+#define RT3883_INTC_INT_UART0 BIT(5)
+#define RT3883_INTC_INT_PIO BIT(6)
+#define RT3883_INTC_INT_DMA BIT(7)
+#define RT3883_INTC_INT_NAND BIT(8)
+#define RT3883_INTC_INT_PERFC BIT(9)
+#define RT3883_INTC_INT_I2S BIT(10)
+#define RT3883_INTC_INT_UART1 BIT(12)
+#define RT3883_INTC_INT_UHST BIT(18)
+#define RT3883_INTC_INT_UDEV BIT(19)
+
+/* FLASH/SRAM/Codec Controller registers */
+#define RT3883_FSCC_REG_FLASH_CFG0 0x00
+#define RT3883_FSCC_REG_FLASH_CFG1 0x04
+#define RT3883_FSCC_REG_CODEC_CFG0 0x40
+#define RT3883_FSCC_REG_CODEC_CFG1 0x44
+
+#define RT3883_FLASH_CFG_WIDTH_SHIFT 26
+#define RT3883_FLASH_CFG_WIDTH_MASK 0x3
+#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0
+#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
+#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
+
+#endif /* _RT3883_REGS_H_ */
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 6723b94..ce57d3e 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,11 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ config SOC_RT3883
+ bool "RT3883"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
endchoice
choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 6d826f2..ba9669c 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 3f49e51..f67c08d 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
+
+#
+# Ralink RT3883
+#
+load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
new file mode 100644
index 0000000..724a570
--- /dev/null
+++ b/arch/mips/ralink/rt3883.c
@@ -0,0 +1,244 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt3883.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT3883_GPIO_MODE_I2C,
+ .gpio_first = RT3883_GPIO_I2C_SD,
+ .gpio_last = RT3883_GPIO_I2C_SCLK,
+ }, {
+ .name = "spi",
+ .mask = RT3883_GPIO_MODE_SPI,
+ .gpio_first = RT3883_GPIO_SPI_CS0,
+ .gpio_last = RT3883_GPIO_SPI_MISO,
+ }, {
+ .name = "uartlite",
+ .mask = RT3883_GPIO_MODE_UART1,
+ .gpio_first = RT3883_GPIO_UART1_TXD,
+ .gpio_last = RT3883_GPIO_UART1_RXD,
+ }, {
+ .name = "jtag",
+ .mask = RT3883_GPIO_MODE_JTAG,
+ .gpio_first = RT3883_GPIO_JTAG_TDO,
+ .gpio_last = RT3883_GPIO_JTAG_TCLK,
+ }, {
+ .name = "mdio",
+ .mask = RT3883_GPIO_MODE_MDIO,
+ .gpio_first = RT3883_GPIO_MDIO_MDC,
+ .gpio_last = RT3883_GPIO_MDIO_MDIO,
+ }, {
+ .name = "ge1",
+ .mask = RT3883_GPIO_MODE_GE1,
+ .gpio_first = RT3883_GPIO_GE1_TXD0,
+ .gpio_last = RT3883_GPIO_GE1_RXCLK,
+ }, {
+ .name = "ge2",
+ .mask = RT3883_GPIO_MODE_GE2,
+ .gpio_first = RT3883_GPIO_GE2_TXD0,
+ .gpio_last = RT3883_GPIO_GE2_RXCLK,
+ }, {
+ .name = "pci",
+ .mask = RT3883_GPIO_MODE_PCI,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "lna a",
+ .mask = RT3883_GPIO_MODE_LNA_A,
+ .gpio_first = RT3883_GPIO_LNA_PE_A0,
+ .gpio_last = RT3883_GPIO_LNA_PE_A2,
+ }, {
+ .name = "lna g",
+ .mask = RT3883_GPIO_MODE_LNA_G,
+ .gpio_first = RT3883_GPIO_LNA_PE_G0,
+ .gpio_last = RT3883_GPIO_LNA_PE_G2,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = RT3883_GPIO_MODE_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm uartf",
+ .mask = RT3883_GPIO_MODE_PCM_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm i2s",
+ .mask = RT3883_GPIO_MODE_PCM_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "i2s uartf",
+ .mask = RT3883_GPIO_MODE_I2S_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm gpio",
+ .mask = RT3883_GPIO_MODE_PCM_GPIO,
+ .gpio_first = RT3883_GPIO_10,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "gpio uartf",
+ .mask = RT3883_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "gpio i2s",
+ .mask = RT3883_GPIO_MODE_GPIO_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "gpio",
+ .mask = RT3883_GPIO_MODE_GPIO,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp pci_mux[] = {
+ {
+ .name = "pci-dev",
+ .mask = 0,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host2",
+ .mask = 1,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host1",
+ .mask = 2,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-fnc",
+ .mask = 3,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-gpio",
+ .mask = 7,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {0}
+};
+
+static void rt3883_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on GPIO 2 */
+ t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+ t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT3883_GPIO_MODE_GPIO,
+ .wdt_reset = rt3883_wdt_reset,
+ .pci = pci_mux,
+ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
+ .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 syscfg0;
+ u32 clksel;
+ u32 ddr2;
+
+ syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
+ clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+ RT3883_SYSCFG0_CPUCLK_MASK);
+ ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+ switch (clksel) {
+ case RT3883_SYSCFG0_CPUCLK_250:
+ cpu_rate = 250000000;
+ sys_rate = (ddr2) ? 125000000 : 83000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_384:
+ cpu_rate = 384000000;
+ sys_rate = (ddr2) ? 128000000 : 96000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_480:
+ cpu_rate = 480000000;
+ sys_rate = (ddr2) ? 160000000 : 120000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_500:
+ cpu_rate = 500000000;
+ sys_rate = (ddr2) ? 166000000 : 125000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", sys_rate);
+ ralink_clk_add("10000120.watchdog", sys_rate);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10100000.ethernet", sys_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
+ n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
+ id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+
+ if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
+ soc_info->compatible = "ralink,rt3883-soc";
+ name = "RT3883";
+ } else {
+ panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+ (id & RT3883_REVID_ECO_ID_MASK));
+}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 13/14] MIPS: ralink: adds support for MT7620 SoC family
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (10 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 12/14] MIPS: ralink: adds support for RT3883 " John Crispin
@ 2013-04-13 8:48 ` John Crispin
2013-04-14 7:42 ` Gabor Juhos
2013-04-13 8:48 ` [PATCH V3 14/14] MIPS: ralink: add cpu-feature-overrides.h John Crispin
12 siblings, 1 reply; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, John Crispin
Add support code for mt7620 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 66 +++++++++
arch/mips/ralink/Kconfig | 3 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/mt7620.c | 204 ++++++++++++++++++++++++++++
5 files changed, 279 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
create mode 100644 arch/mips/ralink/mt7620.c
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
new file mode 100644
index 0000000..3d51235
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -0,0 +1,66 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _MT7620_REGS_H_
+#define _MT7620_REGS_H_
+
+#define MT7620_SYSC_BASE 0x10000000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_REV 0x0c
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CPLL_CONFIG0 0x54
+#define SYSC_REG_CPLL_CONFIG1 0x58
+
+#define MT7620N_CHIP_NAME0 0x33365452
+#define MT7620N_CHIP_NAME1 0x20203235
+
+#define MT7620A_CHIP_NAME0 0x3637544d
+#define MT7620A_CHIP_NAME1 0x20203032
+
+#define CHIP_REV_PKG_MASK 0x1
+#define CHIP_REV_PKG_SHIFT 16
+#define CHIP_REV_VER_MASK 0xf
+#define CHIP_REV_VER_SHIFT 8
+#define CHIP_REV_ECO_MASK 0xf
+
+#define MT7620_CPLL_SW_CONFIG_SHIFT 31
+#define MT7620_CPLL_SW_CONFIG_MASK 0x1
+#define MT7620_CPLL_CPU_CLK_SHIFT 24
+#define MT7620_CPLL_CPU_CLK_MASK 0x1
+
+#define MT7620_GPIO_MODE_I2C BIT(0)
+#define MT7620_GPIO_MODE_UART0_SHIFT 2
+#define MT7620_GPIO_MODE_UART0_MASK 0x7
+#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
+#define MT7620_GPIO_MODE_UARTF 0x0
+#define MT7620_GPIO_MODE_PCM_UARTF 0x1
+#define MT7620_GPIO_MODE_PCM_I2S 0x2
+#define MT7620_GPIO_MODE_I2S_UARTF 0x3
+#define MT7620_GPIO_MODE_PCM_GPIO 0x4
+#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
+#define MT7620_GPIO_MODE_GPIO_I2S 0x6
+#define MT7620_GPIO_MODE_GPIO 0x7
+#define MT7620_GPIO_MODE_UART1 BIT(5)
+#define MT7620_GPIO_MODE_MDIO BIT(8)
+#define MT7620_GPIO_MODE_RGMII1 BIT(9)
+#define MT7620_GPIO_MODE_RGMII2 BIT(10)
+#define MT7620_GPIO_MODE_SPI BIT(11)
+#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
+#define MT7620_GPIO_MODE_WLED BIT(13)
+#define MT7620_GPIO_MODE_JTAG BIT(15)
+#define MT7620_GPIO_MODE_EPHY BIT(15)
+#define MT7620_GPIO_MODE_WDT BIT(22)
+
+#endif
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index ce57d3e..86f6c77 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -20,6 +20,9 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ config SOC_MT7620
+ bool "MT7620"
+
endchoice
choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index ba9669c..38cf1a8 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index f67c08d..b2cbf16 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
# Ralink RT3883
#
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
+
+#
+# Ralink MT7620
+#
+load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
new file mode 100644
index 0000000..c26b9fa
--- /dev/null
+++ b/arch/mips/ralink/mt7620.c
@@ -0,0 +1,204 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#include "common.h"
+
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = MT7620_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = MT7620_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = MT7620_GPIO_MODE_UART1,
+ .gpio_first = 15,
+ .gpio_last = 16,
+ }, {
+ .name = "wdt",
+ .mask = MT7620_GPIO_MODE_WDT,
+ .gpio_first = 17,
+ .gpio_last = 17,
+ }, {
+ .name = "mdio",
+ .mask = MT7620_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "rgmii1",
+ .mask = MT7620_GPIO_MODE_RGMII1,
+ .gpio_first = 24,
+ .gpio_last = 35,
+ }, {
+ .name = "spi refclk",
+ .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
+ .gpio_first = 37,
+ .gpio_last = 39,
+ }, {
+ .name = "jtag",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ /* shared lines with jtag */
+ .name = "ephy",
+ .mask = MT7620_GPIO_MODE_EPHY,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ .name = "nand",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 45,
+ .gpio_last = 59,
+ }, {
+ .name = "rgmii2",
+ .mask = MT7620_GPIO_MODE_RGMII2,
+ .gpio_first = 60,
+ .gpio_last = 71,
+ }, {
+ .name = "wled",
+ .mask = MT7620_GPIO_MODE_WLED,
+ .gpio_first = 72,
+ .gpio_last = 72,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = MT7620_GPIO_MODE_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm uartf",
+ .mask = MT7620_GPIO_MODE_PCM_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm i2s",
+ .mask = MT7620_GPIO_MODE_PCM_I2S,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "i2s uartf",
+ .mask = MT7620_GPIO_MODE_I2S_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm gpio",
+ .mask = MT7620_GPIO_MODE_PCM_GPIO,
+ .gpio_first = 11,
+ .gpio_last = 14,
+ }, {
+ .name = "gpio uartf",
+ .mask = MT7620_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio i2s",
+ .mask = MT7620_GPIO_MODE_GPIO_I2S,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio",
+ .mask = MT7620_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = MT7620_GPIO_MODE_GPIO,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+ u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+
+ c0 = (c0 >> MT7620_CPLL_SW_CONFIG_SHIFT) &
+ MT7620_CPLL_SW_CONFIG_MASK;
+ c1 = (c1 >> MT7620_CPLL_CPU_CLK_SHIFT) &
+ MT7620_CPLL_CPU_CLK_MASK;
+ if (c1 == 0x01) {
+ cpu_rate = 480000000;
+ } else {
+ if (c1 == 0x0) {
+ cpu_rate = 600000000;
+ } else {
+ /* TODO calculate custom clock from pll settings */
+ BUG();
+ }
+ }
+ /* FIXME SDR - 4, DDR - 3 */
+ sys_rate = cpu_rate / 4;
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", 40000000);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,mt7620-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,mt7620-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+ unsigned char *name = NULL;
+ u32 n0;
+ u32 n1;
+ u32 rev;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+ } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH V3 14/14] MIPS: ralink: add cpu-feature-overrides.h
2013-04-13 8:48 [PATCH V3 01/14] MIPS: ralink: add PCI IRQ handling John Crispin
` (11 preceding siblings ...)
2013-04-13 8:48 ` [PATCH V3 13/14] MIPS: ralink: adds support for MT7620 " John Crispin
@ 2013-04-13 8:48 ` John Crispin
12 siblings, 0 replies; 19+ messages in thread
From: John Crispin @ 2013-04-13 8:48 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, Gabor Juhos, John Crispin
From: Gabor Juhos <juhosg@openwrt.org>
Add cpu-feature-overrides.h for RT288x, RT305x and RT3883.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../asm/mach-ralink/rt288x/cpu-feature-overrides.h | 56 ++++++++++++++++++++
.../asm/mach-ralink/rt305x/cpu-feature-overrides.h | 56 ++++++++++++++++++++
.../asm/mach-ralink/rt3883/cpu-feature-overrides.h | 55 +++++++++++++++++++
arch/mips/ralink/Platform | 3 ++
4 files changed, 170 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
new file mode 100644
index 0000000..72fc106
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * Ralink RT288x specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H
+#define _RT288X_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 1
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+
+#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
new file mode 100644
index 0000000..917c286
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * Ralink RT305x specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H
+#define _RT305X_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 1
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 1
+#define cpu_has_mipsmt 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+
+#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
new file mode 100644
index 0000000..181fbf4
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
@@ -0,0 +1,55 @@
+/*
+ * Ralink RT3662/RT3883 specific CPU feature overrides
+ *
+ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H
+#define _RT3883_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+
+#define cpu_has_prefetch 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 1
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 1
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 1
+#define cpu_has_mipsmt 0
+
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+
+#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index b2cbf16..cda4b66 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
# Ralink RT288x
#
load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
+cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
#
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
#
# Ralink RT3883
#
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
#
# Ralink MT7620
--
1.7.10.4
^ permalink raw reply related [flat|nested] 19+ messages in thread