[Xenomai] xeno-test problem

[Xenomai] xeno-test problem

[Younes CHALABI]

Hi,

I have installed [ Xenomai-2.6.0 ] with [ adeos-ipipe-2.6.29-arm-1.13-05.patch ] on the APF27-dev board with the following parameters :

- Buildroot : 2012.02
- gcc : 4.4.6
- libc : uClibc 0.9.33
- busybox : 1.19.4
- U-Boot : (2012.04)
- Linux : 2.6.29.6

Everything goes OK, but when doing the command : [ xeno-test ] I have the following error message :

_______________________________________________________________________________________________________________________________________
# xeno-test
Started child 493: /bin/sh /usr/bin/xeno-test-run-wrapper /usr/bin/xeno-test
+ echo 0
sh: write error: Bad address
+ :
+ /usr/bin/arith
Xenomai: incompatible feature set
(userland requires "kuser_tsc fastsynch nosmp", kernel provides "sa1100 eabi fastsynch nosmp", missing="kuser_tsc").
_______________________________________________________________________________________________________________________________________

I don't know what is the kuser-tsc !!!

If someone has an idea, it will be welcome :)

Younes.

Re: [Xenomai] xeno-test problem

[Gilles Chanteperdrix]

On 04/18/2013 12:12 PM, Younes CHALABI wrote:

> Hi,
> 
> I have installed [ Xenomai-2.6.0 ] with [ adeos-ipipe-2.6.29-arm-1.13-05.patch ] on the APF27-dev board with the following parameters :


Xenomai 2.6.0 is outdated, the latest release in the same branch is
xenomai 2.6.2.1. Please check the latest version in case the issue you
have has already been resolved.

> 
> Younes.
> 
> 
> 



-- 
                                                                Gilles.