[PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Sergei Shtylyov]

Hello.

   Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
to touch both subtrees). The patches were conceived with the complete
bisectability goal in mind.

[1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
[2/9] ehci-platform: add pre_setup() method to platform data
[3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
[4/9] rcar-phy: remove EHCI internal buffer setup
[5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
[6/9] rcar-phy: correct base address
[7/9] rcar-phy: add platform data
[8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
[9/9] rcar-phy: handle platform data

WBR, Sergei

[PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Sergei Shtylyov]

Hello.

   Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
to touch both subtrees). The patches were conceived with the complete
bisectability goal in mind.

[1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
[2/9] ehci-platform: add pre_setup() method to platform data
[3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
[4/9] rcar-phy: remove EHCI internal buffer setup
[5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
[6/9] rcar-phy: correct base address
[7/9] rcar-phy: add platform data
[8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
[9/9] rcar-phy: handle platform data

WBR, Sergei

Re: [PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Russell King - ARM Linux]

On Sat, Apr 20, 2013 at 01:55:12AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
> 'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
> to touch both subtrees). The patches were conceived with the complete
> bisectability goal in mind.
> 
> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
> [2/9] ehci-platform: add pre_setup() method to platform data
> [3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
> [4/9] rcar-phy: remove EHCI internal buffer setup
> [5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
> [6/9] rcar-phy: correct base address
> [7/9] rcar-phy: add platform data
> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
> [9/9] rcar-phy: handle platform data

Please can you rethink how you use get_maintainers.pl and send out
patches?

Sending them "To" everyone who get_maintainers.pl spits out is all well
and good, but it means that there's no discrimination between those who
have a primary interest in the patches and those who don't.

Examples of people with a primary interest: those maintaining the
platforms and/or those who you want to merge your patches.  These
should be on the To: line.

Those who don't: everyone else who may have an interest - these go on
the Cc: line.

You're about the only person I regularly get patches for platforms which
are sent To: me all the time, and really they are not "important" for
me (though they are important enough for me to be Cc'd).

What I'm saying is that having come back from a vacation last Tuesday,
I could not just scan through this mailbox for all messages marked "To"
me and treat those as being more important than everything else, because
soo many of yours were captured by that.  And I'm still tacking the
backlog today, almost a week later.

Please be more considerate to those who you're mailing.

(Also, make sure you don't honor the Mail-Followup-To: header, which
will lead your mailer to keep placing all recipients into the To:
header on reply - because it breaks the above reasoning.  The To:
header should be those recipients who you are directly discussing, and
Cc: is for "interested side parties".)

Thanks.

[PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Russell King - ARM Linux]

On Sat, Apr 20, 2013 at 01:55:12AM +0400, Sergei Shtylyov wrote:
> Hello.
> 
>    Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
> 'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
> to touch both subtrees). The patches were conceived with the complete
> bisectability goal in mind.
> 
> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
> [2/9] ehci-platform: add pre_setup() method to platform data
> [3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
> [4/9] rcar-phy: remove EHCI internal buffer setup
> [5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
> [6/9] rcar-phy: correct base address
> [7/9] rcar-phy: add platform data
> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
> [9/9] rcar-phy: handle platform data

Please can you rethink how you use get_maintainers.pl and send out
patches?

Sending them "To" everyone who get_maintainers.pl spits out is all well
and good, but it means that there's no discrimination between those who
have a primary interest in the patches and those who don't.

Examples of people with a primary interest: those maintaining the
platforms and/or those who you want to merge your patches.  These
should be on the To: line.

Those who don't: everyone else who may have an interest - these go on
the Cc: line.

You're about the only person I regularly get patches for platforms which
are sent To: me all the time, and really they are not "important" for
me (though they are important enough for me to be Cc'd).

What I'm saying is that having come back from a vacation last Tuesday,
I could not just scan through this mailbox for all messages marked "To"
me and treat those as being more important than everything else, because
soo many of yours were captured by that.  And I'm still tacking the
backlog today, almost a week later.

Please be more considerate to those who you're mailing.

(Also, make sure you don't honor the Mail-Followup-To: header, which
will lead your mailer to keep placing all recipients into the To:
header on reply - because it breaks the above reasoning.  The To:
header should be those recipients who you are directly discussing, and
Cc: is for "interested side parties".)

Thanks.

Re: [PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Sergei Shtylyov]

Hello.

Hello.

On 04/22/2013 06:51 PM, Russell King - ARM Linux wrote:

>
>> Hello.
>>
>>     Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
>> 'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
>> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
>> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
>> to touch both subtrees). The patches were conceived with the complete
>> bisectability goal in mind.
>>
>> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
>> [2/9] ehci-platform: add pre_setup() method to platform data
>> [3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
>> [4/9] rcar-phy: remove EHCI internal buffer setup
>> [5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
>> [6/9] rcar-phy: correct base address
>> [7/9] rcar-phy: add platform data
>> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
>> [9/9] rcar-phy: handle platform data
> Please can you rethink how you use get_maintainers.pl and send out
> patches?
>
> Sending them "To" everyone who get_maintainers.pl spits out is all well
> and good, but it means that there's no discrimination between those who
> have a primary interest in the patches and those who don't.

    Heh, yet I completely ignore the "commit signers" list that it has
a habit to spitting out. :-)

> Examples of people with a primary interest: those maintaining the
> platforms and/or those who you want to merge your patches.  These
> should be on the To: line.
>
> Those who don't: everyone else who may have an interest - these go on
> the Cc: line.
>
> You're about the only person I regularly get patches for platforms which
> are sent To: me all the time, and really they are not "important" for
> me (though they are important enough for me to be Cc'd).

    OK, I'll try to make this distinction in the future. I just didn't 
think the
difference between To: and Cc: was really that important to anyone.

> What I'm saying is that having come back from a vacation last Tuesday,
> I could not just scan through this mailbox for all messages marked "To"
> me and treat those as being more important than everything else, because
> soo many of yours were captured by that.  And I'm still tacking the
> backlog today, almost a week later.

     Sorry about that.

> Please be more considerate to those who you're mailing.
>
> (Also, make sure you don't honor the Mail-Followup-To: header, which
> will lead your mailer to keep placing all recipients into the To:
> header on reply - because it breaks the above reasoning.  The To:
> header should be those recipients who you are directly discussing, and
> Cc: is for "interested side parties".)

    That would be somewhat tougher, as I'm usually quick to hit the send
button after completing the email, so can forget to change people from
To: list to CC: list... but I'll have to promise to try to give it more 
attention
from now on.

> Thanks.

WBR, Sergei

[PATCH v5 0/9] Reorganize R8A7779/Marzen USB code

[Sergei Shtylyov]

Hello.

Hello.

On 04/22/2013 06:51 PM, Russell King - ARM Linux wrote:

>
>> Hello.
>>
>>     Here's the set of 9 patches against the Simon Horman's 'renesas.git' repo,
>> 'renesas-next-20130419' tag.  It was created to fix the shortcomings in the
>> R8A7779/Marzen USB platform code and R8A7779 USB common PHY driver, and so
>> spans both arch/arm/mach-shmobile/ and drivers/usb/ subtrees (some patches have
>> to touch both subtrees). The patches were conceived with the complete
>> bisectability goal in mind.
>>
>> [1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
>> [2/9] ehci-platform: add pre_setup() method to platform data
>> [3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
>> [4/9] rcar-phy: remove EHCI internal buffer setup
>> [5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
>> [6/9] rcar-phy: correct base address
>> [7/9] rcar-phy: add platform data
>> [8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
>> [9/9] rcar-phy: handle platform data
> Please can you rethink how you use get_maintainers.pl and send out
> patches?
>
> Sending them "To" everyone who get_maintainers.pl spits out is all well
> and good, but it means that there's no discrimination between those who
> have a primary interest in the patches and those who don't.

    Heh, yet I completely ignore the "commit signers" list that it has
a habit to spitting out. :-)

> Examples of people with a primary interest: those maintaining the
> platforms and/or those who you want to merge your patches.  These
> should be on the To: line.
>
> Those who don't: everyone else who may have an interest - these go on
> the Cc: line.
>
> You're about the only person I regularly get patches for platforms which
> are sent To: me all the time, and really they are not "important" for
> me (though they are important enough for me to be Cc'd).

    OK, I'll try to make this distinction in the future. I just didn't 
think the
difference between To: and Cc: was really that important to anyone.

> What I'm saying is that having come back from a vacation last Tuesday,
> I could not just scan through this mailbox for all messages marked "To"
> me and treat those as being more important than everything else, because
> soo many of yours were captured by that.  And I'm still tacking the
> backlog today, almost a week later.

     Sorry about that.

> Please be more considerate to those who you're mailing.
>
> (Also, make sure you don't honor the Mail-Followup-To: header, which
> will lead your mailer to keep placing all recipients into the To:
> header on reply - because it breaks the above reasoning.  The To:
> header should be those recipients who you are directly discussing, and
> Cc: is for "interested side parties".)

    That would be somewhat tougher, as I'm usually quick to hit the send
button after completing the email, so can forget to change people from
To: list to CC: list... but I'll have to promise to try to give it more 
attention
from now on.

> Thanks.

WBR, Sergei

[PATCH v6 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code

[Sergei Shtylyov]

USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
registered in the Marzen board file.  Move the data and code to their proper
place in setup-r8a7779.c; while at it, we have to rename r8a7779_late_devices[]
to r8a7779_standard_devices[] -- this seems legitimate since they are registered
from r8a7779_add_standard_devices() anyway.

Note that I'm deliberately changing the USB PHY platform device's 'id' field
from (previously just omitted) 0 to -1 as the device is a single of its kind.

Note also that the board and SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes since version 5:
- fixed typos in the changelog.

Changes since version 4:
- resolved reject in the 'board-marzen.c' file, refreshed the patch.

Changes since version 3:
- refreshed the 'board-marzen.c' file.

Changes since version 2:
- added a note about testing to the changelog;
- added ACKs from Simon Horman and Kuninori Morimoto.

Changes since the original posting:
- added a note about bisectability to the changelog.

 arch/arm/mach-shmobile/board-marzen.c         |  178 -------------------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    1 
 arch/arm/mach-shmobile/setup-r8a7779.c        |  185 +++++++++++++++++++++++++-
 3 files changed, 184 insertions(+), 180 deletions(-)

Index: renesas/arch/arm/mach-shmobile/board-marzen.c
=================================--- renesas.orig/arch/arm/mach-shmobile/board-marzen.c
+++ renesas/arch/arm/mach-shmobile/board-marzen.c
@@ -37,10 +37,6 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -150,26 +146,6 @@ static struct platform_device hspi_devic
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] = {
-	[0] = {
-		.start		= 0xffe70000,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0xfff70000,
-		.end		= 0xfff70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device usb_phy_device = {
-	.name		= "rcar_usb_phy",
-	.resource	= usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(usb_phy_resources),
-};
-
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -205,161 +181,9 @@ static struct platform_device *marzen_de
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
-	&usb_phy_device,
 	&leds_device,
 };
 
-/* USB */
-static struct usb_phy *phy;
-static int usb_power_on(struct platform_device *pdev)
-{
-	if (!phy)
-		return -EIO;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	usb_phy_init(phy);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (!phy)
-		return;
-
-	usb_phy_shutdown(phy);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static struct usb_ehci_pdata ehcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ehci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70000,
-		.end	= 0xffe70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci0_device = {
-	.name	= "ehci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci0_resources),
-	.resource	= ehci0_resources,
-};
-
-static struct resource ehci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70000,
-		.end	= 0xfff70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci1_device = {
-	.name	= "ehci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci1_resources),
-	.resource	= ehci1_resources,
-};
-
-static struct usb_ohci_pdata ohcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci0_device = {
-	.name	= "ohci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci0_resources),
-	.resource	= ohci0_resources,
-};
-
-static struct resource ohci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70400,
-		.end	= 0xfff70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci1_device = {
-	.name	= "ohci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci1_resources),
-	.resource	= ohci1_resources,
-};
-
-static struct platform_device *marzen_late_devices[] __initdata = {
-	&ehci0_device,
-	&ehci1_device,
-	&ohci0_device,
-	&ohci1_device,
-};
-
-static void __init marzen_init_late(void)
-{
-	/* get usb phy */
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	shmobile_init_late();
-	platform_add_devices(marzen_late_devices,
-			     ARRAY_SIZE(marzen_late_devices));
-}
-
 static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
@@ -418,6 +242,6 @@ MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.init_machine	= marzen_init,
-	.init_late	= marzen_init_late,
+	.init_late	= r8a7779_init_late,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
=================================--- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -33,6 +33,7 @@ extern void r8a7779_add_early_devices(vo
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
+extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
Index: renesas/arch/arm/mach-shmobile/setup-r8a7779.c
=================================--- renesas.orig/arch/arm/mach-shmobile/setup-r8a7779.c
+++ renesas/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -32,6 +32,10 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
@@ -383,6 +387,162 @@ static struct platform_device sata_devic
 	},
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
+/* USB */
+static struct usb_phy *phy;
+
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 /* Ether */
 static struct resource ether_resources[] = {
 	{
@@ -404,9 +564,10 @@ static struct platform_device *r8a7779_d
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&usb_phy_device,
 };
 
-static struct platform_device *r8a7779_late_devices[] __initdata = {
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
 	&i2c2_device,
@@ -426,8 +587,8 @@ void __init r8a7779_add_standard_devices
 
 	platform_add_devices(r8a7779_devices_dt,
 			    ARRAY_SIZE(r8a7779_devices_dt));
-	platform_add_devices(r8a7779_late_devices,
-			    ARRAY_SIZE(r8a7779_late_devices));
+	platform_add_devices(r8a7779_standard_devices,
+			    ARRAY_SIZE(r8a7779_standard_devices));
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -470,6 +631,23 @@ void __init r8a7779_add_early_devices(vo
 	 */
 }
 
+static struct platform_device *r8a7779_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
+};
+
+void __init r8a7779_init_late(void)
+{
+	/* get USB PHY */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(r8a7779_late_devices,
+			     ARRAY_SIZE(r8a7779_late_devices));
+}
+
 #ifdef CONFIG_USE_OF
 void __init r8a7779_init_delay(void)
 {
@@ -503,6 +681,7 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
+	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */

[PATCH v6 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code

[Sergei Shtylyov]

USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and
registered in the Marzen board file.  Move the data and code to their proper
place in setup-r8a7779.c; while at it, we have to rename r8a7779_late_devices[]
to r8a7779_standard_devices[] -- this seems legitimate since they are registered
from r8a7779_add_standard_devices() anyway.

Note that I'm deliberately changing the USB PHY platform device's 'id' field
from (previously just omitted) 0 to -1 as the device is a single of its kind.

Note also that the board and SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>

---
Changes since version 5:
- fixed typos in the changelog.

Changes since version 4:
- resolved reject in the 'board-marzen.c' file, refreshed the patch.

Changes since version 3:
- refreshed the 'board-marzen.c' file.

Changes since version 2:
- added a note about testing to the changelog;
- added ACKs from Simon Horman and Kuninori Morimoto.

Changes since the original posting:
- added a note about bisectability to the changelog.

 arch/arm/mach-shmobile/board-marzen.c         |  178 -------------------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    1 
 arch/arm/mach-shmobile/setup-r8a7779.c        |  185 +++++++++++++++++++++++++-
 3 files changed, 184 insertions(+), 180 deletions(-)

Index: renesas/arch/arm/mach-shmobile/board-marzen.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-marzen.c
+++ renesas/arch/arm/mach-shmobile/board-marzen.c
@@ -37,10 +37,6 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -150,26 +146,6 @@ static struct platform_device hspi_devic
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] = {
-	[0] = {
-		.start		= 0xffe70000,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0xfff70000,
-		.end		= 0xfff70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device usb_phy_device = {
-	.name		= "rcar_usb_phy",
-	.resource	= usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(usb_phy_resources),
-};
-
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -205,161 +181,9 @@ static struct platform_device *marzen_de
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
-	&usb_phy_device,
 	&leds_device,
 };
 
-/* USB */
-static struct usb_phy *phy;
-static int usb_power_on(struct platform_device *pdev)
-{
-	if (!phy)
-		return -EIO;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	usb_phy_init(phy);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (!phy)
-		return;
-
-	usb_phy_shutdown(phy);
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static struct usb_ehci_pdata ehcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ehci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70000,
-		.end	= 0xffe70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci0_device = {
-	.name	= "ehci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci0_resources),
-	.resource	= ehci0_resources,
-};
-
-static struct resource ehci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70000,
-		.end	= 0xfff70400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ehci1_device = {
-	.name	= "ehci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ehcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ehci1_resources),
-	.resource	= ehci1_resources,
-};
-
-static struct usb_ohci_pdata ohcix_pdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci0_resources[] = {
-	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4c),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci0_device = {
-	.name	= "ohci-platform",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci0_resources),
-	.resource	= ohci0_resources,
-};
-
-static struct resource ohci1_resources[] = {
-	[0] = {
-		.start	= 0xfff70400,
-		.end	= 0xfff70800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_iid(0x4d),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci1_device = {
-	.name	= "ohci-platform",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &ohcix_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(ohci1_resources),
-	.resource	= ohci1_resources,
-};
-
-static struct platform_device *marzen_late_devices[] __initdata = {
-	&ehci0_device,
-	&ehci1_device,
-	&ohci0_device,
-	&ohci1_device,
-};
-
-static void __init marzen_init_late(void)
-{
-	/* get usb phy */
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	shmobile_init_late();
-	platform_add_devices(marzen_late_devices,
-			     ARRAY_SIZE(marzen_late_devices));
-}
-
 static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
@@ -418,6 +242,6 @@ MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq,
 	.init_machine	= marzen_init,
-	.init_late	= marzen_init_late,
+	.init_late	= r8a7779_init_late,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ renesas/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -33,6 +33,7 @@ extern void r8a7779_add_early_devices(vo
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
+extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
 extern void r8a7779_pm_init(void);
Index: renesas/arch/arm/mach-shmobile/setup-r8a7779.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/setup-r8a7779.c
+++ renesas/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -32,6 +32,10 @@
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
@@ -383,6 +387,162 @@ static struct platform_device sata_devic
 	},
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
+/* USB */
+static struct usb_phy *phy;
+
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4c),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_iid(0x4d),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 /* Ether */
 static struct resource ether_resources[] = {
 	{
@@ -404,9 +564,10 @@ static struct platform_device *r8a7779_d
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&usb_phy_device,
 };
 
-static struct platform_device *r8a7779_late_devices[] __initdata = {
+static struct platform_device *r8a7779_standard_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
 	&i2c2_device,
@@ -426,8 +587,8 @@ void __init r8a7779_add_standard_devices
 
 	platform_add_devices(r8a7779_devices_dt,
 			    ARRAY_SIZE(r8a7779_devices_dt));
-	platform_add_devices(r8a7779_late_devices,
-			    ARRAY_SIZE(r8a7779_late_devices));
+	platform_add_devices(r8a7779_standard_devices,
+			    ARRAY_SIZE(r8a7779_standard_devices));
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -470,6 +631,23 @@ void __init r8a7779_add_early_devices(vo
 	 */
 }
 
+static struct platform_device *r8a7779_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
+};
+
+void __init r8a7779_init_late(void)
+{
+	/* get USB PHY */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(r8a7779_late_devices,
+			     ARRAY_SIZE(r8a7779_late_devices));
+}
+
 #ifdef CONFIG_USE_OF
 void __init r8a7779_init_delay(void)
 {
@@ -503,6 +681,7 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
+	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */