cluster and public network configuration.

cluster and public network configuration.

[Roman Alekseev]

Hi,

I've configured my ceph cluster to use cluster and public networks, but 
looks like this configuration doesn't work correctly because when rados 
bench returns the following test's result:

  Maintaining 16 concurrent writes of 4194304 bytes for at least 10 seconds.
  Object prefix: benchmark_data_srv64_4661
    sec Cur ops   started  finished  avg MB/s  cur MB/s  last lat avg lat
      0       0         0         0         0         0 -         0
      1      16        16         0         0         0 -         0
      2      16        17         1   1.99975         2   1.17015 1.17015
      3      16        17         1   1.33317         0         - 1.17015
      4      16        17         1  0.999894         0         - 1.17015
      5      16        17         1  0.799913         0         - 1.17015


------------------------------------------------------------------------------------
eth0 - public network
eth1 - cluster network

ceph.conf:

[global]

         public network = 10.8.0.0/24
         cluster network = 192.168.102.0/24

[osd.0]
        host = srv95
        cluster addr = 192.168.102.95
        public addr = 10.8.0.95
        devs = /dev/sdb

[osd.1]

        host = srv115
        cluster addr = 192.168.102.115
        public addr = 10.8.0.115
        devs = /dev/sda6

[osd.2]
         host = srv6
         cluster addr = 192.168.102.6
         public addr = 10.8.0.6
         devs = /dev/sda6

[osd.3]
         host = srv140
         cluster addr = 192.168.102.140
         public addr = 10.8.0.140
         devs = /dev/sda6

[osd.4]
         host = srv140
         cluster addr = 192.168.102.140
         public addr = 10.8.0.140
         devs = /dev/sdb6

[osd.5]
        host = srv6
        cluster addr = 192.168.102.6
        public addr = 10.8.0.6
        devs = /dev/sdb6

[osd.6]
        host = srv115
        cluster addr = 192.168.102.115
        public addr = 10.8.0.115
        devs = /dev/sdb6


# id    weight    type name    up/down    reweight
-1    7    root default
-3    7        rack unknownrack
-2    1            host srv95
0    1                osd.0    up    1
-4    2            host srv115
1    1                osd.1    up    1
6    1                osd.6    up    1
-5    2            host srv6
2    1                osd.2    up    1
5    1                osd.5    up    1
-6    2            host srv140
3    1                osd.3    up    1
4    1                osd.4    up    1
------------------------------------------------------------------------------------

My question is: How to set up cluster network correctly?

Thanks


-- 
Kind regards,

R. Alekseev