[U-Boot] [PATCH v4] i2c: s3c24xx: add hsi2c controller support

[Heiko Schocher <hs@denx.de>]

Hello Naveen,

On 01.05.2013 21:04, Naveen Krishna Ch wrote:
> Hello Heiko,
> 
> On 29 April 2013 21:14, Heiko Schocher <hs@denx.de> wrote:
>> Hello Naveen,
>>
>> On 26.04.2013 05:08, Naveen Krishna Ch wrote:
>>> On 14 April 2013 22:48, Heiko Schocher <hs@denx.de> wrote:
>>>> Hello Naveen Krishna,
>>>>
>>>>
>>>> On 13.04.2013 06:42, Naveen Krishna Ch wrote:
>>>>>
>>>>> On 6 April 2013 07:07, Naveen Krishna Chatradhi
>>>>> <naveenkrishna.ch@gmail.com>  wrote:
>>>>>>
>>>>>> Add support for hsi2c controller available on exynos5420.
>>>>>>
>>>>>> Note: driver currently supports only fast speed mode 100kbps
>>>>>>
>>>>>> Change-Id: I02555b1dc8f4ac21c50aa5158179768563c92f43
>>>>>> Signed-off-by: Naveen Krishna Chatradhi<ch.naveen@samsung.com>
>>>>>> Signed-off-by: R. Chandrasekar<rc.sekar@samsung.com>
>>>>>> Reviewed-by: Vadim Bendebury<vbendeb@google.com>
>>>>>> Reviewed-by: Simon Glass<sjg@google.com>
>>>>>> ---
>>>>>> Changes since v3:
>>>>>>
>>>>>> 1. Implemented get_timer instead of while and udelay for master busy
>>>>>> function
>>>>>> 2. Use reg base address from device tree
>>>>>> 3. Split the timing function to check for the errors
>>>>>> 4. Implemented reset function for to recover from failure cases
>>>>>> 5. Implemented a comat string for hsi2c to distingush the channels
>>>>>> 6. Minor cosmotic changes
>>>>>>
>>>>>> Note: FIFOs will be implemented in subsequent patches
>>>>>>
>>>>>>   drivers/i2c/s3c24x0_i2c.c |  494
>>>>>> +++++++++++++++++++++++++++++++++++++++++----
>>>>>>   drivers/i2c/s3c24x0_i2c.h |   36 ++++
>>>>>>   2 files changed, 486 insertions(+), 44 deletions(-)
>>>>
>>>> [...]
>>>>
>>>>>> --
>>>>>> 1.7.9.5
>>>>>
>>>>> Hello all i got it review by Simon and Vadim.
>>>>> Any updates on this driver please
>>>>
>>>>
>>>> As this patch in patchwork is in the responsibilty of Minkyu Kang (why?,
>>>> added to cc):
>>>>
>>>> Reviewed-by: Heiko Schocher<hs@denx.de>
>>>> Acked-by: Heiko Schocher <hs@denx.de>
>>> Hello Minkyu Kang,
>>>
>>> This patch was Acked and reviewed a while ago.
>>> Can you please update on this.
>>
>> Tom Rini wrote:
>>>> Naveen Krishna Ch (1):
>>>>       i2c: s3c24xx: add hsi2c controller support
>>>>
>>>>  drivers/i2c/s3c24x0_i2c.c | 494
>>>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
>>>>  drivers/i2c/s3c24x0_i2c.h |  36 ++++++++++
>>>>  post/drivers/i2c.c        |   2 +
>>>>  3 Dateien ge?ndert, 488 Zeilen hinzugef?gt(+), 44 Zeilen entfernt(-)
>>>
>>> NAK.  MAKEALL -a arm:
>>> --------------------- SUMMARY ----------------------------
>>> Boards compiled: 306
>>> Boards with errors: 3 ( snow VCMA9 smdk5250 )
>>> ----------------------------------------------------------
>>>
>>> And the problem is:
>>> s3c24x0_i2c.c: In function 'board_i2c_init':
>>> s3c24x0_i2c.c:945:3: error: 'COMPAT_SAMSUNG_EXYNOS5_I2C' undeclared
>>> (first use in this function)
>>
>> Please fix, thanks!
> 
> I've submitted a patch to u-boot at lists.denx.de as soon as i saw the build error.
> 
> "fdtdec: Add compatible string for High speed i2c"
> http://www.mail-archive.com/u-boot at lists.denx.de/msg112143.html
> 
> which should fix. Can you please confirm the same.

On current HEAD with your 2 patches, I see:

[hs at pollux u-boot]$ ./MAKEALL VCMA9
Configuring for VCMA9 board...
s3c24x0_i2c.c:133:16: error: 'i2c_busses' undeclared (first use in this function)
s3c24x0_i2c.c:134:11: error: 'i2c_bus' undeclared (first use in this function)
s3c24x0_i2c.c:911:10: error: 'i2c_bus' undeclared (first use in this function)
s3c24x0_i2c.c:923:18: error: 'i2c_busses' undeclared (first use in this function)
arm-linux-gnueabi-size: './u-boot': No such file
s3c24x0_i2c.c: In function 'get_bus':
s3c24x0_i2c.c:133:16: error: 'i2c_busses' undeclared (first use in this function)
s3c24x0_i2c.c:133:16: note: each undeclared identifier is reported only once for each function it appears in
s3c24x0_i2c.c:134:11: error: 'i2c_bus' undeclared (first use in this function)
s3c24x0_i2c.c: In function 'hsi2c_get_clk_details':
s3c24x0_i2c.c:267:2: warning: implicit declaration of function 'get_i2c_clk' [-Wimplicit-function-declaration]
s3c24x0_i2c.c: In function 'process_nodes':
s3c24x0_i2c.c:911:10: error: 'i2c_bus' undeclared (first use in this function)
s3c24x0_i2c.c:921:3: warning: implicit declaration of function 'pinmux_decode_periph_id' [-Wimplicit-function-declaration]
s3c24x0_i2c.c:923:18: error: 'i2c_busses' undeclared (first use in this function)
s3c24x0_i2c.c:924:3: warning: implicit declaration of function 'exynos_pinmux_config' [-Wimplicit-function-declaration]
s3c24x0_i2c.c: At top level:
s3c24x0_i2c.c:264:12: warning: 'hsi2c_get_clk_details' defined but not used [-Wunused-function]
s3c24x0_i2c.c:899:13: warning: 'process_nodes' defined but not used [-Wunused-function]
make[1]: *** [s3c24x0_i2c.o] Fehler 1
make: *** [drivers/i2c/libi2c.o] Fehler 2
make: *** Warte auf noch nicht beendete Prozesse...

--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with errors: 1 ( VCMA9 )
----------------------------------------------------------
[hs at pollux u-boot]$ git log
commit b89874f919da1255d50f47b4b349224f5f4fb4a7
Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Date:   Fri Apr 5 15:37:57 2013 +0000

    i2c: s3c24xx: add hsi2c controller support

    Add support for hsi2c controller available on exynos5420.

    Note: driver currently supports only fast speed mode 100kbps

    Change-Id: I02555b1dc8f4ac21c50aa5158179768563c92f43
    Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
    Signed-off-by: R. Chandrasekar <rc.sekar@samsung.com>
    Reviewed-by: Vadim Bendebury <vbendeb@google.com>
    Reviewed-by: Simon Glass <sjg@google.com>
    Reviewed-by: Heiko Schocher<hs@denx.de>
    Acked-by: Heiko Schocher <hs@denx.de>

commit 1d3381320c9f9181c4dd4f1edf5e7e28285b1c41
Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Date:   Mon Apr 29 12:58:52 2013 +0000

    fdtdec: Add compatible string for High speed i2c

    Adds a new COMPAT string exynos5-hsi2c for high speed i2c controller
    available on exynos5 SoCs from Samsung.

    Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>

ommit 971020c755e5633c9a8f532356ee1750b38dd86f
Author: Simon Glass <sjg@chromium.org>
Date:   Sat Apr 20 08:42:52 2013 +0000

    sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT

    Enable these options to use FITs on sandbox.

    Signed-off-by: Simon Glass <sjg@chromium.org>

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany