i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

[ttom]

[-- Attachment #1: Type: text/plain, Size: 5936 bytes --]




Hi,
In order to fix i.MX28 EVK touch misalignment in fsl-image-gui build.
See
https://community.freescale.com/servlet/JiveServlet/showImage/2-318646-3476/Touch+wrong.png

Add PREFERRED_PROVIDER_virtual/kernel = "linux-fslc" in local.conf


But Perf package have an error to make image build fail
Any idea to slove this
problem?

List error below

**********************
WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been
validated with this version of the build system; you may possibly experience unexpected failures.
It is recommended that you use a tested distribution.
Loading cache: 100%
|##########################################################################################################################|
ETA: 00:00:00
Loaded 1614 entries from dependency cache.
 
Build Configuration:
BB_VERSION = "1.16.0"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE =
"imx28evk"
DISTRO = "poky"
DISTRO_VERSION = "1.3.1"
TUNE_FEATURES = "armv5 dsp
thumb arm926ejs"
TARGET_FPU = "soft"
meta 
meta-yocto =
"(nobranch):e2ef3200e61af33ec71e34fb7a67cbcdd68dc981"
meta-oe =
"(nobranch):34e5537e67b655b8d2effbbecc207d88eea52b87"
meta-fsl-arm =
"(nobranch):a0e486a76af5819ee76ac34e966feb72bd3c48bd"
meta-fsl-arm-extra =
"(nobranch):09a2b5d29a82844c9ae79626ebffd4946893f24e"
meta-fsl-demos =
"(nobranch):6dd73bd7f5581fff273d17032f5625efa901b6d7"
 
NOTE: Resolving any missing task
queue dependencies
NOTE: multiple providers are available for jpeg (jpeg, libjpeg-turbo)
NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg
NOTE: multiple providers
are available for jpeg-native (jpeg-native, libjpeg-turbo-native)
NOTE: consider defining a
PREFERRED_PROVIDER entry to match jpeg-native
NOTE: Preparing runqueue
NOTE: Executing
SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_compile (see
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/temp/log.do_compile.23579
for further information)
ERROR: Logfile of failure stored in:
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/temp/log.do_compile.23579
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 -C
/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk/usr/src/kernel/tools/perf
O=/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4
CROSS_COMPILE=arm-poky-linux-gnueabi- ARCH=arm CC=arm-poky-linux-gnueabi-gcc -march=armv5te -marm
-mthumb-interwork -mtune=arm926ej-s
--sysroot=/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk AR=arm-poky-linux-gnueabi-ar
prefix=/usr NO_GTK2=1 NO_NEWT=1 NO_DWARF=1 NO_LIBPERL=1 NO_LIBPYTHON=1 all
| make: Entering
directory `/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk/usr/src/kernel/tools/perf'
|
Makefile:510: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables
dwarf support. Please install new elfutils-devel/libdw-dev
| Makefile:526: No libunwind
found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99
|
Makefile:581: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or
libaudit-dev
| Makefile:686: Python support won't be built
| FLEX
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/util/pmu-flex.c
| FLEX
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/util/parse-events-flex.c
| GEN perf-archive
| make[1]: Entering directory
`/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk/usr/src/kernel/tools/lib/traceevent'
|
make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/builtin-annotate.o
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/builtin-bench.o
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/bench/sched-messaging.o
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/bench/sched-pipe.o
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/bench/mem-memcpy.o
| cc1: error: include location "/usr/local/include" is unsafe for cross-compilation
[-Werror=poison-system-directories]
| cc1: all warnings being treated as errors
|
make[2]: *** [.event-parse.d] Error 1
| make[1]: *** [sub-make] Error 2
| make[1]:
Leaving directory
`/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk/usr/src/kernel/tools/lib/traceevent'
|
make: ***
[/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/libtraceevent.a]
Error 2
| make: *** Waiting for unfinished jobs....
| CC
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/perf-3.4/bench/mem-memset.o
| make: Leaving directory
`/home/thomas/Build/Yocto/otavio/tmp/sysroots/imx28evk/usr/src/kernel/tools/perf'
| ERROR:
oe_runmake failed
| ERROR: Function failed: do_compile (see
/home/thomas/Build/Yocto/otavio/tmp/work/imx28evk-poky-linux-gnueabi/perf-3.4-r5/temp/log.do_compile.23579
for further information)
ERROR: Task 3028
(/home/thomas/Build/Yocto/sources/poky/meta/recipes-kernel/perf/perf_3.4.bb, do_compile) failed
with exit code '1'
WARNING: nbench-byte: No generic license file exists for: freely in any
provider
WARNING: nbench-byte: No generic license file exists for: distributable in any
provider
WARNING: iperf: No generic license file exists for: NewBSD in any provider
WARNING: iozone3: No generic license file exists for: iozone3 in any provider
WARNING: QA
Issue: lmbench: Files/directories were installed but not shipped

BR Thomas


--
http://card.url.com.tw
土地房屋租賃買賣, 超效果且免費的媒體

[-- Attachment #2: Type: text/html, Size: 6183 bytes --]

Re: i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

[Otavio Salvador]

On Fri, Apr 19, 2013 at 3:07 PM,  <ttom@ms5.url.com.tw> wrote:
> Hi,
> In order to fix i.MX28 EVK touch misalignment in fsl-image-gui build.
> See
> https://community.freescale.com/servlet/JiveServlet/showImage/2-318646-3476/Touch+wrong.png
>
> Add PREFERRED_PROVIDER_virtual/kernel = "linux-fslc" in local.conf
>
>
> But Perf package have an error to make image build fail
> Any idea to slove this problem?

I didn't build the image here but I been building it based in dylan
(master currently) and it should work just fine for you. The touch
should be proper calibrated when using Xorg image by default.

(p.s: please subscribe to the mailing list as I keep approving your posts)

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

Re: i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

[Daiane Angolini]

On 04/19/2013 03:07 PM, ttom@ms5.url.com.tw wrote:
> Hi,
> In order to fix i.MX28 EVK touch misalignment in fsl-image-gui build.
> See
> https://community.freescale.com/servlet/JiveServlet/showImage/2-318646-3476/Touch+wrong.png
>
> Add PREFERRED_PROVIDER_virtual/kernel = "linux-fslc" in local.conf

Are you using danny?

I mean, I just created core-image-base with linux-fslc on top of master 
and I didn't face this problem.

Daiane

Re: i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

[ttom]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="big5", Size: 774 bytes --]




Hi,

Yes, I use 

repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b
danny

Then repo sync.

I'll test again to check the result, thanks your help.

BR Thomas

> On 04/19/2013 03:07 PM, ttom@ms5.url.com.tw wrote:
 >> Hi,
 >> In
order to fix i.MX28 EVK touch misalignment in fsl-image-gui build.
 >> See

>>
https://community.freescale.com/servlet/JiveServlet/showImage/2-318646-3476/Touch+wrong.png

>>
 >> Add PREFERRED_PROVIDER_virtual/kernel = "linux-fslc" in local.conf

> 
 > Are you using danny?
 > 
 > I mean, I just created
core-image-base with linux-fslc on top of master
 > and I didn't face this problem.

> 
 > Daiane
 > 
 >


--
http://myhome.url.com.tw
¶i¾n´¼¨¹ªÀ°Ïºô, ´°¿Ë·ü¾FÅܪº§ó»´ÃP¦³®Ä

[-- Attachment #2: Type: text/html, Size: 1041 bytes --]

Re: i.MX28 EVK Touch misalignment in Sato UI (fsl-image-gui)

[ttom]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="big5", Size: 1027 bytes --]




Dear Daiane,

Thanks! Problem gone

> 
 > 
 > 
 > Hi,
 > 
 > Yes, I use�

> 
 > repo init -u https://github.com/Freescale/fsl-community-bsp-platform�-b
 > danny
 > 
 > Then repo sync.
 > 
 > I'll test again to
check the result, thanks your help.
 > 
 > BR Thomas
 > 
 >> On
04/19/2013 03:07 PM, ttom@ms5.url.com.tw wrote:
 > >> Hi,
 > >> In
 > order to fix i.MX28 EVK touch misalignment in fsl-image-gui build.
 > >>
See
 > 
 >>>
 >
https://community.freescale.com/servlet/JiveServlet/showImage/2-318646-3476/Touch+wrong.png

> 
 >>>
 > >> Add PREFERRED_PROVIDER_virtual/kernel = "linux-fslc"
in local.conf
 > 
 >>
 > > Are you using danny?
 > >
 > > I mean, I just created
 > core-image-base with linux-fslc on top of master
 > > and I didn't face this problem.
 > 
 >>
 > > Daiane
 > >
 > >
 > 
 > 
 > --
 >
http://myhome.url.com.tw
 > ¶i¾n´¼¨¹ªÀ°Ïºô, ´°¿Ë·ü¾FÅܪº§ó»´ÃP¦³®Ä


--
http://myhome.url.com.tw
¶i¾n´¼¨¹ªÀ°Ïºô, ´°¿Ë·ü¾FÅܪº§ó»´ÃP¦³®Ä

[-- Attachment #2: Type: text/html, Size: 1339 bytes --]

i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[ttom]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="big5", Size: 19469 bytes --]




Hi,

Afer use fsl-image-gui-sdk's sd card image, Then the SD Card can't replace fsl-image-gui and
fsl-image-test by dd.

DD command is "sudo dd if= <fsl-image-test-xxxxxx file>.sdcard of=/dev/sdX bs=4M"

Error message list below

Any way to solve this problem?

********************

U-Boot 2013.04 (Apr 29 2013 -
12:21:11)              

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SD/MMC #0, 3V3
DRAM:  128 MiB
NAND:  No NAND device found!!!
0 MiB
MMC:  
MXS MMC: 0
MMC0: Command 8 timeout (status 0xe0384020)
*** Warning - bad CRC, using
default environment
                                                                              
 
In:   
serial                                                                 
 
Out:  
serial                                                                 
 
Err:  
serial                                                                 
 
Net:   FEC0
[PRIME]                                                           
 
Warning: FEC0 using MAC address from net
device                               
 
,
FEC1                                                                        
 
Warning: FEC1 using MAC address from net
device                               
 
                                                                              
 
Hit any key to stop autoboot: 
0                                              
 
mmc0 is current
device                                                        
 
MMC0: Command 8 timeout (status
0xe02c4020)                                   
 
reading
boot.scr                                                              
 
** Unable to read file boot.scr
**                                            
 
reading
uImage                                                                
 
2601492 bytes read in 801 ms (3.1
MiB/s)                                      
 
Booting from mmc
...                                                          
 
reading
imx28-evk.dtb                                                         
 
** Unable to read file imx28-evk.dtb
**                                       
 
## Booting kernel from Legacy Image at 42000000
...                           
 
   Image Name:  
Linux-2.6.35.3-1.1.0+yocto+g9145                             
 
   Created:      2013-04-29   3:46:03
UTC                                     
 
   Image Type:   ARM Linux Kernel Image
(uncompressed)                        
 
   Data Size:    2601428 Bytes = 2.5
MiB                                      
 
   Load Address:
40008000                                                     
 
   Entry Point: 
40008000                                                     
 
   Verifying Checksum ...
OK                                                  
 
   Loading Kernel Image ...
OK                                                
 
OK                                                                            
 
                                                                              
 
Starting kernel
...                                                           
 
                                                                              
 
Uncompressing Linux... done, booting the
kernel.                              
 
Linux version 2.6.35.3-1.1.0+yocto+g914558e (thomas@thomas-Linux) (gcc version 3
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ),
cr=00053177                 
 
CPU: VIVT data cache, VIVT instruction
cache                                  
 
Machine: Freescale MX28EVK
board                                              
 
Memory policy: ECC disabled, Data cache
writeback                             
 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
32512      
Kernel command line: console=ttyAMA0,115200
root=/dev/mmcblk0p3 rw rootwait     
PID hash table entries: 512 (order:
-1, 2048
bytes)                           
 
Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)                
 
Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)                  
 
Memory: 128MB = 128MB
total                                                   
 
Memory: 124228k/124228k available, 6844k reserved, 0K
highmem                 
 
Virtual kernel memory
layout:                                                 
 
    vector  : 0xffff0000 - 0xffff1000   (   4
kB)                             
 
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896
kB)                             
 
    DMA     : 0xfde00000 - 0xffe00000  
(  32
MB)                             
 
    vmalloc : 0xc8800000 - 0xf0000000   ( 632
MB)                             
 
    lowmem  : 0xc0000000 - 0xc8000000   ( 128
MB)                             
 
    modules : 0xbf000000 - 0xc0000000   (  16
MB)                             
 
      .init : 0xc0008000 - 0xc0030000   ( 160
kB)                             
 
      .text : 0xc0030000 - 0xc050b000   (4972
kB)                             
 
      .data : 0xc050c000 - 0xc054a4a0   ( 250
kB)                             
 
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1         
Hierarchical RCU
implementation.                                              
 
        RCU-based detection of stalled CPUs is
disabled.                      
 
        Verbose stalled-CPUs detection is
disabled.                           
 
NR_IRQS:288                                                                   
 
Console: colour dummy device
80x30                                            
 
console [ttyAMA0]
enabled                                                     
 
Calibrating delay loop... 226.09 BogoMIPS
(lpj=1130496)                       
 
pid_max: default: 32768 minimum:
301                                          
 
Security Framework
initialized                                                
 
SELinux: 
Initializing.                                                       
 
Mount-cache hash table entries:
512                                           
 
CPU: Testing write buffer coherency:
ok                                       
 
devtmpfs:
initialized                                                         
 
regulator: core version
0.5                                                   
 
NET: Registered protocol family
16                                            
 
regulator: vddd: 800 <--> 1575 mV at 1500 mV fast
normal                      
 
regulator: vdddbo: 800 <--> 1575 mV fast
normal                               
 
regulator: vdda: 1500 <--> 2275 mV at 1800 mV fast
normal                     
 
vddio = 3380000,
val=10                                                       
 
regulator: vddio: 2880 <--> 3680 mV at 3380 mV fast
normal                    
 
regulator: overall_current: fast
normal                                       
 
regulator:
vbus5v:                                                            
 
regulator: mxs-duart-1: fast
normal                                           
 
regulator: mxs-bl-1: fast
normal                                              
 
regulator: mxs-i2c-1: fast
normal                                             
 
regulator: mmc_ssp-1: fast
normal                                             
 
regulator: mmc_ssp-2: fast
normal                                             
 
regulator: charger-1: fast
normal                                             
 
regulator: power-test-1: fast
normal                                          
 
regulator: cpufreq-1: fast
normal                                             
 
i.MX IRAM pool: 124
KB@0xc8820000                                             
 
usb DR wakeup device is
registered                                            
 
IMX usb wakeup
probe                                                          
 
audit: cannot initialize inotify
handle                                       
 
bio: create slab <bio-0> at
0                                                 
 
SCSI subsystem
initialized                                                    
 
Freescale USB OTG Driver loaded, $Revision: 1.55
$                            
 
usbcore: registered new interface driver
usbfs                                
 
usbcore: registered new interface driver
hub                                  
 
usbcore: registered new device driver
usb                                     
 
Advanced Linux Sound Architecture Driver Version
1.0.23.                      
 
Switching to clocksource mxs clock
source                                     
 
NET: Registered protocol family
2                                             
 
IP route cache hash table entries: 1024 (order: 0, 4096
bytes)                
 
TCP established hash table entries: 4096 (order: 3, 32768
bytes)              
 
TCP bind hash table entries: 4096 (order: 2, 16384
bytes)                     
 
TCP: Hash tables configured (established 4096 bind
4096)                      
 
TCP reno
registered                                                           
 
UDP hash table entries: 256 (order: 0, 4096
bytes)                            
 
UDP-Lite hash table entries: 256 (order: 0, 4096
bytes)                       
 
NET: Registered protocol family
1                                             
 
RPC: Registered udp transport
module.                                         
 
RPC: Registered tcp transport
module.                                         
 
RPC: Registered tcp NFSv4.1 backchannel transport
module.                     
 
Bus freq driver module
loaded                                                 
 
IMX usb wakeup
probe                                                          
 
usb h1 wakeup device is
registered                                            
 
mxs_cpu_init: cpufreq init
finished                                           
 
audit: initializing netlink socket
(disabled)                                 
 
type=2000 audit(0.490:1):
initialized                                         
 
VFS: Disk quotas
dquot_6.5.2                                                  
 
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)                    
 
JFFS2 version 2.2. (NAND) &#65533;© 2001-2006 Red Hat,
Inc.                          
 
msgmni has been set to
242                                                    
 
alg: No test for stdrng
(krng)                                                
 
cryptodev: driver
loaded.                                                     
 
Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)            
io scheduler noop
registered                                                  
 
io scheduler deadline
registered                                              
 
io scheduler cfq registered
(default)                                         
 
Console: switching to colour frame buffer device
100x30                       
 
mxs-duart.0: ttyAMA0 at MMIO 0x80074000 (irq = 47) is a
DebugUART               
mxs-auart.0: ttySP0 at MMIO 0x8006a000 (irq = 112) is a
mxs-auart.0             
Found
APPUART
3.1.0                                                           
 
mxs-auart.1: ttySP1 at MMIO 0x8006c000 (irq = 113) is a
mxs-auart.1             
Found
APPUART
3.1.0                                                           
 
mxs-auart.2: ttySP2 at MMIO 0x8006e000 (irq = 114) is a
mxs-auart.2             
Found
APPUART
3.1.0                                                           
 
mxs-auart.3: ttySP3 at MMIO 0x80070000 (irq = 115) is a
mxs-auart.3             
Found
APPUART
3.1.0                                                           
 
mxs-auart.4: ttySP4 at MMIO 0x80072000 (irq = 116) is a
mxs-auart.4             
Found
APPUART
3.1.0                                                           
 
brd: module
loaded                                                            
 
loop: module
loaded                                                           
 
i.MX GPMI
NFC                                                                 
 
NFC: Version 1, 8-chip GPMI and
BCH                                           
 
gpmi-nfc: probe of gpmi-nfc.0 failed with error
1                             
 
mxs-spi mxs-spi.0: Max possible speed 120000 = 120000000/2
kHz                
 
mxs-spi mxs-spi.0: at 0x80014000 mapped to 0xF0014000, irq=84, bus 1, DMA ver_m4
FEC Ethernet
Driver                                                           
 
fec_enet_mii_bus:
probed                                                      
 
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver                    
 
fsl-ehci fsl-ehci: Freescale On-Chip EHCI Host
Controller                     
 
fsl-ehci fsl-ehci: new USB bus registered, assigned bus number
1                
fsl-ehci fsl-ehci: irq 93, io base
0x80080000                                 
 
fsl-ehci fsl-ehci: USB 2.0 started, EHCI
1.00                                 
 
hub 1-0:1.0: USB hub
found                                                    
 
hub 1-0:1.0: 1 port
detected                                                  
 
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host
Controller                   
 
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number
2              
fsl-ehci
fsl-ehci.0: irq 92, io base
0x80090000                               
 
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI
1.00                               
 
hub 2-0:1.0: USB hub
found                                                    
 
hub 2-0:1.0: 1 port
detected                                                  
 
Initializing USB Mass Storage
driver...                                       
 
usbcore: registered new interface driver
usb-storage                          
 
USB Mass Storage support
registered.                                          
 
ARC USBOTG Device Controller driver (1 August
2005)                           
 
mice: PS/2 mouse device common for all
mice                                   
 
input: mxs-kbd as
/devices/platform/mxs-kbd.0/input/input0                    
 
input: MXS touchscreen as
/devices/virtual/input/input1                       
 
MXS RTC driver v1.0 hardware
v2.3.0                                           
 
mxs-rtc mxs-rtc.0: rtc core: registered mxs-rtc as
rtc0                       
 
IR NEC protocol handler
initialized                                           
 
IR RC5(x) protocol handler
initialized                                        
 
IR RC6 protocol handler
initialized                                           
 
IR JVC protocol handler
initialized                                           
 
IR Sony protocol handler
initialized                                          
 
Linux video capture interface:
v2.00                                          
 
mxs-pxp mxs-pxp.0:
initialized                                                
 
mxs watchdog: initialized, heartbeat 19
sec                                   
 
mxs-mmc: MXS SSP Controller MMC Interface
driver                              
 
mxs-mmc mxs-mmc.0: mmc0: MXS SSP MMC DMAIRQ 82 ERRIRQ
96                      
 
dcp dcp.0: DCP crypto
enabled.!                                               
 
usbcore: registered new interface driver
hiddev                               
 
usbcore: registered new interface driver
usbhid                               
 
usbhid: USB HID core
driver                                                   
 
sgtl5000-i2c 0-000a: SGTL5000 revision
17                                     
 
mmc0: new high speed SD card at address
0002                                  
 
mmcblk0: mmc0:0002 N/A   3.67 GiB
(ro)                                        
 
 mmcblk0: p1 p2
p3                                                            
 
mxs-spdif mxs-spdif.0: MXS SPDIF Audio
Transmitter                            
 
No device for codec mxs
spdif                                                 
 
No device for DAI mxs
spdif                                                   
 
No device for DAI
mxs-saif                                                    
 
No device for DAI
mxs-spdif                                                   
 
asoc: SGTL5000 <-> mxs-saif mapping
ok                                        
 
Failed to add route LINE_OUT->Ext
Spk                                         
 
asoc: mxs spdif <-> mxs-spdif mapping
ok                                      
 
ALSA device
list:                                                             
 
  #0: mxs-evk
(SGTL5000)                                                      
 
  #1: mxs-evk (mxs
spdif)                                                     
 
TCP cubic
registered                                                          
 
NET: Registered protocol family
17                                            
 
can: controller area network core (rev 20090105 abi
8)                        
 
NET: Registered protocol family
29                                            
 
can: raw protocol (rev
20090105)                                              
 
mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 00:00:06 UTC
(6)          
VFS: Cannot open root device
"mmcblk0p3" or
unknown-block(179,3)              
 
Please append a correct "root=" boot option; here are the available partitions: 
b300         3850240 mmcblk0 driver:
mmcblk                                   
 
  b301            1024
mmcblk0p1                                              
 
  b302           10240
mmcblk0p2                                              
 
  b303          372736
mmcblk0p3                                              
 
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3)
Backtrace:                                                                    
 
[<c0034110>] (dump_backtrace+0x0/0x10c) from [<c03d2364>]
(dump_stack+0x18/0x1c)
 r6:c0029a14 r5:c7471000 r4:c054b3f8
r3:00000002                              
 
[<c03d234c>] (dump_stack+0x0/0x1c) from [<c03d254c>]
(panic+0x74/0xf0)          
[<c03d24d8>]
(panic+0x0/0xf0) from [<c0008f14>] (mount_block_root+0x1d4/0x218)  
 r3:00000000 r2:00000001 r1:c7c27f48
r0:c048cdf4                              
 
[<c0008d40>] (mount_block_root+0x0/0x218) from [<c0009130>]
(mount_root+0xe0/0x)
[<c0009050>] (mount_root+0x0/0x124) from [<c00092e0>]
(prepare_namespace+0x16c/)
 r5:c0029a29
r4:c054a758                                                      
 
[<c0009174>] (prepare_namespace+0x0/0x1cc) from [<c0008b14>]
(kernel_init+0x12c)
 r5:c0028600
r4:c0028600                                                      
 
[<c00089e8>] (kernel_init+0x0/0x16c) from [<c004f490>]
(do_exit+0x0/0x6c0)      
 r5:c00089e8 r4:00000000

**************************


--
http://isp.url.com.tw
´¼¨¹¥Í¬¡À]§K¶O¼·±µ¤Wºô  ¹q¸Ü 40661234 / 4497890 ±b¸¹ url ±K½X url

[-- Attachment #2: Type: text/html, Size: 64754 bytes --]

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[Vladan Jovanovic]

[-- Attachment #1: Type: text/plain, Size: 11680 bytes --]

Looking at meta-fsl-arm/classes/image_types_fsl.bbclass,
generate_mxs_sdcard puts rootfs in second partition. Mainline u-boot seems
to have default setting of /dev/mmcblk0p3 when it should be changed to
/dev/mmcblk0p2 for Yocto.


On Thu, May 2, 2013 at 1:51 PM, <ttom@ms5.url.com.tw> wrote:

> Hi,
>
> Afer use fsl-image-gui-sdk's sd card image, Then the SD Card can't replace
> fsl-image-gui and fsl-image-test by dd.
>
> DD command is "sudo dd if= <fsl-image-test-xxxxxx file>.sdcard of=/dev/sdX
> bs=4M"
>
> Error message list below
>
> Any way to solve this problem?
>
> ********************
>
> U-Boot 2013.04 (Apr 29 2013 - 12:21:11)
>
> CPU:   Freescale i.MX28 rev1.2 at 454 MHz
> BOOT:  SSP SD/MMC #0, 3V3
> DRAM:  128 MiB
> NAND:  No NAND device found!!!
> 0 MiB
> MMC:   MXS MMC: 0
> MMC0: Command 8 timeout (status 0xe0384020)
> *** Warning - bad CRC, using default environment
>
>
> In:
> serial
> Out:
> serial
> Err:
> serial
> Net:   FEC0
> [PRIME]
> Warning: FEC0 using MAC address from net
> device
> ,
> FEC1
>
> Warning: FEC1 using MAC address from net
> device
>
>
> Hit any key to stop autoboot:
> 0
> mmc0 is current
> device
> MMC0: Command 8 timeout (status
> 0xe02c4020)
> reading
> boot.scr
> ** Unable to read file boot.scr
> **
> reading
> uImage
> 2601492 bytes read in 801 ms (3.1
> MiB/s)
> Booting from mmc
> ...
> reading
> imx28-evk.dtb
> ** Unable to read file imx28-evk.dtb
> **
> ## Booting kernel from Legacy Image at 42000000
> ...
>    Image Name:
> Linux-2.6.35.3-1.1.0+yocto+g9145
>    Created:      2013-04-29   3:46:03
> UTC
>    Image Type:   ARM Linux Kernel Image
> (uncompressed)
>    Data Size:    2601428 Bytes = 2.5
> MiB
>    Load Address:
> 40008000
>    Entry Point:
> 40008000
>    Verifying Checksum ...
> OK
>    Loading Kernel Image ...
> OK
> OK
>
>
>
> Starting kernel
> ...
>
>
> Uncompressing Linux... done, booting the
> kernel.
> Linux version 2.6.35.3-1.1.0+yocto+g914558e (thomas@thomas-Linux) (gcc
> version 3
> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ),
> cr=00053177
> CPU: VIVT data cache, VIVT instruction
> cache
> Machine: Freescale MX28EVK
> board
> Memory policy: ECC disabled, Data cache
> writeback
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
> 32512
> Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p3 rw
> rootwait
> PID hash table entries: 512 (order: -1, 2048
> bytes)
> Dentry cache hash table entries: 16384 (order: 4, 65536
> bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768
> bytes)
> Memory: 128MB = 128MB
> total
> Memory: 124228k/124228k available, 6844k reserved, 0K
> highmem
> Virtual kernel memory
> layout:
>     vector  : 0xffff0000 - 0xffff1000   (   4
> kB)
>     fixmap  : 0xfff00000 - 0xfffe0000   ( 896
> kB)
>     DMA     : 0xfde00000 - 0xffe00000   (  32
> MB)
>     vmalloc : 0xc8800000 - 0xf0000000   ( 632
> MB)
>     lowmem  : 0xc0000000 - 0xc8000000   ( 128
> MB)
>     modules : 0xbf000000 - 0xc0000000   (  16
> MB)
>       .init : 0xc0008000 - 0xc0030000   ( 160
> kB)
>       .text : 0xc0030000 - 0xc050b000   (4972
> kB)
>       .data : 0xc050c000 - 0xc054a4a0   ( 250
> kB)
> SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
> Nodes=1
> Hierarchical RCU
> implementation.
>         RCU-based detection of stalled CPUs is
> disabled.
>         Verbose stalled-CPUs detection is
> disabled.
> NR_IRQS:288
>
> Console: colour dummy device
> 80x30
> console [ttyAMA0]
> enabled
> Calibrating delay loop... 226.09 BogoMIPS
> (lpj=1130496)
> pid_max: default: 32768 minimum:
> 301
> Security Framework
> initialized
> SELinux:
> Initializing.
> Mount-cache hash table entries:
> 512
> CPU: Testing write buffer coherency:
> ok
> devtmpfs:
> initialized
> regulator: core version
> 0.5
> NET: Registered protocol family
> 16
> regulator: vddd: 800 <--> 1575 mV at 1500 mV fast
> normal
> regulator: vdddbo: 800 <--> 1575 mV fast
> normal
> regulator: vdda: 1500 <--> 2275 mV at 1800 mV fast
> normal
> vddio = 3380000,
> val=10
> regulator: vddio: 2880 <--> 3680 mV at 3380 mV fast
> normal
> regulator: overall_current: fast
> normal
> regulator:
> vbus5v:
> regulator: mxs-duart-1: fast
> normal
> regulator: mxs-bl-1: fast
> normal
> regulator: mxs-i2c-1: fast
> normal
> regulator: mmc_ssp-1: fast
> normal
> regulator: mmc_ssp-2: fast
> normal
> regulator: charger-1: fast
> normal
> regulator: power-test-1: fast
> normal
> regulator: cpufreq-1: fast
> normal
> i.MX IRAM pool: 124 KB@0xc8820000
>
> usb DR wakeup device is
> registered
> IMX usb wakeup
> probe
> audit: cannot initialize inotify
> handle
> bio: create slab <bio-0> at
> 0
> SCSI subsystem
> initialized
> Freescale USB OTG Driver loaded, $Revision: 1.55
> $
> usbcore: registered new interface driver
> usbfs
> usbcore: registered new interface driver
> hub
> usbcore: registered new device driver
> usb
> Advanced Linux Sound Architecture Driver Version
> 1.0.23.
> Switching to clocksource mxs clock
> source
> NET: Registered protocol family
> 2
> IP route cache hash table entries: 1024 (order: 0, 4096
> bytes)
> TCP established hash table entries: 4096 (order: 3, 32768
> bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384
> bytes)
> TCP: Hash tables configured (established 4096 bind
> 4096)
> TCP reno
> registered
> UDP hash table entries: 256 (order: 0, 4096
> bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096
> bytes)
> NET: Registered protocol family
> 1
> RPC: Registered udp transport
> module.
> RPC: Registered tcp transport
> module.
> RPC: Registered tcp NFSv4.1 backchannel transport
> module.
> Bus freq driver module
> loaded
> IMX usb wakeup
> probe
> usb h1 wakeup device is
> registered
> mxs_cpu_init: cpufreq init
> finished
> audit: initializing netlink socket
> (disabled)
> type=2000 audit(0.490:1):
> initialized
> VFS: Disk quotas
> dquot_6.5.2
> Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat,
> Inc.
> msgmni has been set to
> 242
> alg: No test for stdrng
> (krng)
> cryptodev: driver
> loaded.
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major
> 253)
> io scheduler noop
> registered
> io scheduler deadline
> registered
> io scheduler cfq registered
> (default)
> Console: switching to colour frame buffer device
> 100x30
> mxs-duart.0: ttyAMA0 at MMIO 0x80074000 (irq = 47) is a
> DebugUART
> mxs-auart.0: ttySP0 at MMIO 0x8006a000 (irq = 112) is a
> mxs-auart.0
> Found APPUART
> 3.1.0
> mxs-auart.1: ttySP1 at MMIO 0x8006c000 (irq = 113) is a
> mxs-auart.1
> Found APPUART
> 3.1.0
> mxs-auart.2: ttySP2 at MMIO 0x8006e000 (irq = 114) is a
> mxs-auart.2
> Found APPUART
> 3.1.0
> mxs-auart.3: ttySP3 at MMIO 0x80070000 (irq = 115) is a
> mxs-auart.3
> Found APPUART
> 3.1.0
> mxs-auart.4: ttySP4 at MMIO 0x80072000 (irq = 116) is a
> mxs-auart.4
> Found APPUART
> 3.1.0
> brd: module
> loaded
> loop: module
> loaded
> i.MX GPMI
> NFC
> NFC: Version 1, 8-chip GPMI and
> BCH
> gpmi-nfc: probe of gpmi-nfc.0 failed with error
> 1
> mxs-spi mxs-spi.0: Max possible speed 120000 = 120000000/2
> kHz
> mxs-spi mxs-spi.0: at 0x80014000 mapped to 0xF0014000, irq=84, bus 1, DMA
> ver_m4
> FEC Ethernet
> Driver
> fec_enet_mii_bus:
> probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> fsl-ehci fsl-ehci: Freescale On-Chip EHCI Host
> Controller
> fsl-ehci fsl-ehci: new USB bus registered, assigned bus number
> 1
> fsl-ehci fsl-ehci: irq 93, io base
> 0x80080000
> fsl-ehci fsl-ehci: USB 2.0 started, EHCI
> 1.00
> hub 1-0:1.0: USB hub
> found
> hub 1-0:1.0: 1 port
> detected
> fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host
> Controller
> fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number
> 2
> fsl-ehci fsl-ehci.0: irq 92, io base
> 0x80090000
> fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI
> 1.00
> hub 2-0:1.0: USB hub
> found
> hub 2-0:1.0: 1 port
> detected
> Initializing USB Mass Storage
> driver...
> usbcore: registered new interface driver
> usb-storage
> USB Mass Storage support
> registered.
> ARC USBOTG Device Controller driver (1 August
> 2005)
> mice: PS/2 mouse device common for all
> mice
> input: mxs-kbd as
> /devices/platform/mxs-kbd.0/input/input0
> input: MXS touchscreen as
> /devices/virtual/input/input1
> MXS RTC driver v1.0 hardware
> v2.3.0
> mxs-rtc mxs-rtc.0: rtc core: registered mxs-rtc as
> rtc0
> IR NEC protocol handler
> initialized
> IR RC5(x) protocol handler
> initialized
> IR RC6 protocol handler
> initialized
> IR JVC protocol handler
> initialized
> IR Sony protocol handler
> initialized
> Linux video capture interface:
> v2.00
> mxs-pxp mxs-pxp.0:
> initialized
> mxs watchdog: initialized, heartbeat 19
> sec
> mxs-mmc: MXS SSP Controller MMC Interface
> driver
> mxs-mmc mxs-mmc.0: mmc0: MXS SSP MMC DMAIRQ 82 ERRIRQ
> 96
> dcp dcp.0: DCP crypto
> enabled.!
> usbcore: registered new interface driver
> hiddev
> usbcore: registered new interface driver
> usbhid
> usbhid: USB HID core
> driver
> sgtl5000-i2c 0-000a: SGTL5000 revision
> 17
> mmc0: new high speed SD card at address
> 0002
> mmcblk0: mmc0:0002 N/A   3.67 GiB
> (ro)
>  mmcblk0: p1 p2
> p3
> mxs-spdif mxs-spdif.0: MXS SPDIF Audio
> Transmitter
> No device for codec mxs
> spdif
> No device for DAI mxs
> spdif
> No device for DAI
> mxs-saif
> No device for DAI
> mxs-spdif
> asoc: SGTL5000 <-> mxs-saif mapping
> ok
> Failed to add route LINE_OUT->Ext
> Spk
> asoc: mxs spdif <-> mxs-spdif mapping
> ok
> ALSA device
> list:
>   #0: mxs-evk
> (SGTL5000)
>   #1: mxs-evk (mxs
> spdif)
> TCP cubic
> registered
> NET: Registered protocol family
> 17
> can: controller area network core (rev 20090105 abi
> 8)
> NET: Registered protocol family
> 29
> can: raw protocol (rev
> 20090105)
> mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 00:00:06 UTC
> (6)
> VFS: Cannot open root device "mmcblk0p3" or
> unknown-block(179,3)
> Please append a correct "root=" boot option; here are the available
> partitions:
> b300         3850240 mmcblk0 driver:
> mmcblk
>   b301            1024
> mmcblk0p1
>   b302           10240
> mmcblk0p2
>   b303          372736
> mmcblk0p3
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(179,3)
> Backtrace:
>
> [<c0034110>] (dump_backtrace+0x0/0x10c) from [<c03d2364>]
> (dump_stack+0x18/0x1c)
>  r6:c0029a14 r5:c7471000 r4:c054b3f8
> r3:00000002
> [<c03d234c>] (dump_stack+0x0/0x1c) from [<c03d254c>]
> (panic+0x74/0xf0)
> [<c03d24d8>] (panic+0x0/0xf0) from [<c0008f14>]
> (mount_block_root+0x1d4/0x218)
>  r3:00000000 r2:00000001 r1:c7c27f48
> r0:c048cdf4
> [<c0008d40>] (mount_block_root+0x0/0x218) from [<c0009130>]
> (mount_root+0xe0/0x)
> [<c0009050>] (mount_root+0x0/0x124) from [<c00092e0>]
> (prepare_namespace+0x16c/)
>  r5:c0029a29
> r4:c054a758
> [<c0009174>] (prepare_namespace+0x0/0x1cc) from [<c0008b14>]
> (kernel_init+0x12c)
>  r5:c0028600
> r4:c0028600
> [<c00089e8>] (kernel_init+0x0/0x16c) from [<c004f490>]
> (do_exit+0x0/0x6c0)
>  r5:c00089e8 r4:00000000
>
> **************************
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>

[-- Attachment #2: Type: text/html, Size: 29824 bytes --]

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[Otavio Salvador]

On Thu, May 2, 2013 at 8:21 AM, Vladan Jovanovic
<vladan.jovanovic@gmail.com> wrote:
> Looking at meta-fsl-arm/classes/image_types_fsl.bbclass, generate_mxs_sdcard
> puts rootfs in second partition. Mainline u-boot seems to have default
> setting of /dev/mmcblk0p3 when it should be changed to /dev/mmcblk0p2 for
> Yocto.

Yes and this change has been done in your github tree, which we use as
source :-)

https://github.com/Freescale/u-boot-imx

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[ttom]

[-- Attachment #1.1: Type: text/plain, Size: 473 bytes --]




Hi,

I can't find out any setting to modify boot partition.

According to fdisk check, no active tag show in sdcard partition table.

Put active in partition 1, fsl-image-gui image still can not work so far, but fsl-image-test
can work.

> On Thu, May 2, 2013 at 8:21 AM, Vladan Jovanovic
 >
<vladan.jovanovic@gmail.com> wrote:
 >> Looking at
meta-fsl-arm/classes/image_types_fsl.bbclass, generate_mxs_sdcard
 >> puts rootfs in
second partition. Main

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[Otavio Salvador]

On Thu, May 2, 2013 at 11:36 PM,  <ttom@ms5.url.com.tw> wrote:
> I can't find out any setting to modify boot partition.
>
> According to fdisk check, no active tag show in sdcard partition table.
>
> Put active in partition 1, fsl-image-gui image still can not work so far,
> but fsl-image-test can work.

Well so we have some weird here.

If fsl-image-test and fsl-image-gui has different results we might
have a problem. Can you try to change the SD card and try to use a
different machine to write it? The GUI image is much bigger and
depending on the controller it might be an issue. Hard to say but a
worth test.

--
Otavio Salvador                             O.S. Systems
E-mail: otavio@ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[Daiane Angolini]

On 05/02/2013 11:46 PM, Otavio Salvador wrote:
> On Thu, May 2, 2013 at 11:36 PM,  <ttom@ms5.url.com.tw> wrote:
>> I can't find out any setting to modify boot partition.
>>
>> According to fdisk check, no active tag show in sdcard partition table.
>>
>> Put active in partition 1, fsl-image-gui image still can not work so far,
>> but fsl-image-test can work.
>
> Well so we have some weird here.
>
> If fsl-image-test and fsl-image-gui has different results we might
> have a problem. Can you try to change the SD card and try to use a
> different machine to write it? The GUI image is much bigger and
> depending on the controller it might be an issue. Hard to say but a
> worth test.

@ttom tell me what to test and I can give it a try over here.

You can keep the testing emails PVT (IMHO) if you wish


Daiane

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[ttom]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="big5", Size: 1393 bytes --]




Hi Daiane

Please  build 2 images, fsl-image-gui and fsl-image-gui-sdk.

1st, dd fsl-image-gui, that will be work.

Then dd fsl-image-gui-sdk. That will make boot fail.

After that, dd back fsl-image-gui. EVK can't boot again.

(Each dd action, umount /media/disk and /media/Boot first.)

I feel weired. It can boot yesterday. But it work this morning.

Thanks your help.

BR Thomas

 

> On 05/02/2013 11:46 PM, Otavio Salvador wrote:
 >> On Thu, May 2, 2013 at 11:36
PM, <ttom@ms5.url.com.tw> wrote:
 >>> I can't find out any setting to modify
boot partition.
 >>>
 >>> According to fdisk check, no active tag show
in sdcard partition table.
 >>>
 >>> Put active in partition 1,
fsl-image-gui image still can not work so far,
 >>> but fsl-image-test can work.
 >>
 >> Well so we have some weird here.
 >>
 >> If
fsl-image-test and fsl-image-gui has different results we might
 >> have a problem. Can
you try to change the SD card and try to use a
 >> different machine to write it? The
GUI image is much bigger and
 >> depending on the controller it might be an issue. Hard
to say but a
 >> worth test.
 > 
 > @ttom tell me what to test and I
can give it a try over here.
 > 
 > You can keep the testing emails PVT (IMHO) if
you wish
 > 
 > 
 > Daiane
 > 
 > 


--
http://card.url.com.tw
¤g¦a©Ð«Î¯²¸î¶R½æ, ¶W®ÄªG¥B§K¶Oªº´CÅé

[-- Attachment #2: Type: text/html, Size: 1625 bytes --]

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[Daiane Angolini]

On 05/03/2013 12:05 PM, ttom@ms5.url.com.tw wrote:
> Hi Daiane
> 
> Please  build 2 images, fsl-image-gui and fsl-image-gui-sdk.
> 
> 1st, dd fsl-image-gui, that will be work.
> 
> Then dd fsl-image-gui-sdk. That will make boot fail.
> 
> After that, dd back fsl-image-gui. EVK can't boot again.

I was not able to reproduce your issue.

What's your status right now?




-- 
Daiane

Re: i.MX28 SDCARD boot fail after dd Yocto fsl-image-gui-sdk image

[ttom]

[-- Attachment #1: Type: text/plain, Size: 640 bytes --]




Try to find a way to set up Qt or GTK development.

So far, can't make it work now.

BR Thomas

> On 05/03/2013 12:05 PM, ttom@ms5.url.com.tw wrote:
 >> Hi Daiane

>>
 >> Please build 2 images, fsl-image-gui and fsl-image-gui-sdk.

>>
 >> 1st, dd fsl-image-gui, that will be work.
 >>
 >>
Then dd fsl-image-gui-sdk. That will make boot fail.
 >>
 >> After that, dd
back fsl-image-gui. EVK can't boot again.
 > 
 > I was not able to reproduce your
issue.
 > 
 > What's your status right now?
 > 
 > 
 > 
 > 
 > --
 > Daiane
 > 
 > 


--
http://card.url.com.tw
土地房屋租賃買賣, 超效果且免費的媒體

[-- Attachment #2: Type: text/html, Size: 764 bytes --]