* [PATCH v6 0/3] Add USB support to R8A7778/BOCK-W @ 2013-04-30 23:09 ` Sergei Shtylyov 0 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:09 UTC (permalink / raw) To: linux-arm-kernel Hello. Here's the set of 3 patches against the Simon Horman's 'renesas.git' repo, 'renesas-next-20130426' tag and the R8A7779/Marzen patchset I've posted. It was created to add support of R8A7778/BOCK-W USB to the platform code and the USB common PHY driver, and so spans both arch/arm/mach-shmobile/ and drivers/usb/phy/ subtrees. [1/3] rcar-phy: add R8A7778 support [2/3] ARM: shmobile: r8a7778: add USB support [3/3] ARM: shmobile: BOCK-W: add USB support The patch #4 (ARM: shmobile: BOCK-W: enable USB in defconfig) that has been already merged, is not reposted. WBR, Sergei ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 0/3] Add USB support to R8A7778/BOCK-W @ 2013-04-30 23:09 ` Sergei Shtylyov 0 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:09 UTC (permalink / raw) To: linux-arm-kernel Hello. Here's the set of 3 patches against the Simon Horman's 'renesas.git' repo, 'renesas-next-20130426' tag and the R8A7779/Marzen patchset I've posted. It was created to add support of R8A7778/BOCK-W USB to the platform code and the USB common PHY driver, and so spans both arch/arm/mach-shmobile/ and drivers/usb/phy/ subtrees. [1/3] rcar-phy: add R8A7778 support [2/3] ARM: shmobile: r8a7778: add USB support [3/3] ARM: shmobile: BOCK-W: add USB support The patch #4 (ARM: shmobile: BOCK-W: enable USB in defconfig) that has been already merged, is not reposted. WBR, Sergei ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 2/3] ARM: shmobile: r8a7778: add USB support 2013-04-30 23:09 ` Sergei Shtylyov @ 2013-04-30 23:13 ` Sergei Shtylyov -1 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:13 UTC (permalink / raw) To: linux-arm-kernel Add USB clock and EHCI, OHCI, and USB PHY platform devices for R8A7778 SoC; add a function to register PHY device with board-specific platform data and register EHCI and OHCI platfrom devices from the init_late() board method. Also, don't forget to enable CONFIG_ARCH_HAS_[EO]HCI options for R8A7778 SoC in Kconfig... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes since version 5: - renamed the R-Car PHY driver header file in #include. Changes since version 4: - annotated USB resources and '[eo]hci_info' as '__initdata' since they're kmemdup()'ed while registering the platform devices anyway; - refreshed the patch. Changes since version 3: - resolved reject in the 'clock-r8a7778.c' file, refreshed the patch. Changes since version 2: - refreshed the patch. Changes since the original posting: - resolved rejects in the 'clock-r8a7778.c' file; - lowercased the SoC name in the subject. arch/arm/mach-shmobile/Kconfig | 2 arch/arm/mach-shmobile/clock-r8a7778.c | 4 arch/arm/mach-shmobile/include/mach/r8a7778.h | 3 arch/arm/mach-shmobile/setup-r8a7778.c | 108 ++++++++++++++++++++++++++ 4 files changed, 117 insertions(+) Index: renesas/arch/arm/mach-shmobile/Kconfig =================================--- renesas.orig/arch/arm/mach-shmobile/Kconfig +++ renesas/arch/arm/mach-shmobile/Kconfig @@ -41,6 +41,8 @@ config ARCH_R8A7778 select CPU_V7 select SH_CLK_CPG select ARM_GIC + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" Index: renesas/arch/arm/mach-shmobile/clock-r8a7778.c =================================--- renesas.orig/arch/arm/mach-shmobile/clock-r8a7778.c +++ renesas/arch/arm/mach-shmobile/clock-r8a7778.c @@ -105,6 +105,7 @@ static struct clk *main_clks[] = { enum { MSTP323, MSTP322, MSTP321, MSTP114, + MSTP100, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP_NR }; @@ -114,6 +115,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ + [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ @@ -130,6 +132,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ + CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h =================================--- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -20,10 +20,13 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/sh_eth.h> +#include <linux/platform_data/usb-rcar-phy.h> extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata); +extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); Index: renesas/arch/arm/mach-shmobile/setup-r8a7778.c =================================--- renesas.orig/arch/arm/mach-shmobile/setup-r8a7778.c +++ renesas/arch/arm/mach-shmobile/setup-r8a7778.c @@ -30,6 +30,12 @@ #include <linux/irqchip.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> +#include <linux/pm_runtime.h> +#include <linux/usb/phy.h> +#include <linux/usb/hcd.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <linux/dma-mapping.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <mach/common.h> @@ -89,6 +95,99 @@ static struct sh_timer_config sh_tmu1_pl &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) +/* USB PHY */ +static struct resource usb_phy_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70800, 0x100), + DEFINE_RES_MEM(0xffe76000, 0x100), +}; + +void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1, + usb_phy_resources, + ARRAY_SIZE(usb_phy_resources), + pdata, sizeof(*pdata)); +} + +/* USB */ +static struct usb_phy *phy; + +static int usb_power_on(struct platform_device *pdev) +{ + if (!phy) + return -EIO; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + usb_phy_init(phy); + + return 0; +} + +static void usb_power_off(struct platform_device *pdev) +{ + if (!phy) + return; + + usb_phy_shutdown(phy); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); +} + +static int ehci_init_internal_buffer(struct usb_hcd *hcd) +{ + /* + * Below are recommended values from the datasheet; + * see [USB :: Setting of EHCI Internal Buffer]. + */ + /* EHCI IP internal buffer setting */ + iowrite32(0x00ff0040, hcd->regs + 0x0094); + /* EHCI IP internal buffer enable */ + iowrite32(0x00000001, hcd->regs + 0x009C); + + return 0; +} + +static struct usb_ehci_pdata ehci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, + .pre_setup = ehci_init_internal_buffer, +}; + +static struct resource ehci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +static struct usb_ohci_pdata ohci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, +}; + +static struct resource ohci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70400, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +#define USB_PLATFORM_INFO(hci) \ +static struct platform_device_info hci##_info __initdata = { \ + .parent = &platform_bus, \ + .name = #hci "-platform", \ + .id = -1, \ + .res = hci##_resources, \ + .num_res = ARRAY_SIZE(hci##_resources), \ + .data = &hci##_pdata, \ + .size_data = sizeof(hci##_pdata), \ + .dma_mask = DMA_BIT_MASK(32), \ +} + +USB_PLATFORM_INFO(ehci); +USB_PLATFORM_INFO(ohci); + /* Ether */ static struct resource ether_resources[] = { DEFINE_RES_MEM(0xfde00000, 0x400), @@ -197,6 +296,14 @@ void __init r8a7778_add_standard_devices r8a7778_register_tmu(1); } +void __init r8a7778_init_late(void) +{ + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + platform_device_register_full(&ehci_info); + platform_device_register_full(&ohci_info); +} + static struct renesas_intc_irqpin_config irqpin_platform_data = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, @@ -310,6 +417,7 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8 .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END #endif /* CONFIG_USE_OF */ ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 2/3] ARM: shmobile: r8a7778: add USB support @ 2013-04-30 23:13 ` Sergei Shtylyov 0 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:13 UTC (permalink / raw) To: linux-arm-kernel Add USB clock and EHCI, OHCI, and USB PHY platform devices for R8A7778 SoC; add a function to register PHY device with board-specific platform data and register EHCI and OHCI platfrom devices from the init_late() board method. Also, don't forget to enable CONFIG_ARCH_HAS_[EO]HCI options for R8A7778 SoC in Kconfig... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes since version 5: - renamed the R-Car PHY driver header file in #include. Changes since version 4: - annotated USB resources and '[eo]hci_info' as '__initdata' since they're kmemdup()'ed while registering the platform devices anyway; - refreshed the patch. Changes since version 3: - resolved reject in the 'clock-r8a7778.c' file, refreshed the patch. Changes since version 2: - refreshed the patch. Changes since the original posting: - resolved rejects in the 'clock-r8a7778.c' file; - lowercased the SoC name in the subject. arch/arm/mach-shmobile/Kconfig | 2 arch/arm/mach-shmobile/clock-r8a7778.c | 4 arch/arm/mach-shmobile/include/mach/r8a7778.h | 3 arch/arm/mach-shmobile/setup-r8a7778.c | 108 ++++++++++++++++++++++++++ 4 files changed, 117 insertions(+) Index: renesas/arch/arm/mach-shmobile/Kconfig =================================================================== --- renesas.orig/arch/arm/mach-shmobile/Kconfig +++ renesas/arch/arm/mach-shmobile/Kconfig @@ -41,6 +41,8 @@ config ARCH_R8A7778 select CPU_V7 select SH_CLK_CPG select ARM_GIC + select USB_ARCH_HAS_EHCI + select USB_ARCH_HAS_OHCI config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" Index: renesas/arch/arm/mach-shmobile/clock-r8a7778.c =================================================================== --- renesas.orig/arch/arm/mach-shmobile/clock-r8a7778.c +++ renesas/arch/arm/mach-shmobile/clock-r8a7778.c @@ -105,6 +105,7 @@ static struct clk *main_clks[] = { enum { MSTP323, MSTP322, MSTP321, MSTP114, + MSTP100, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021, MSTP016, MSTP015, MSTP_NR }; @@ -114,6 +115,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */ [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */ [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */ + [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */ [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */ [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */ [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */ @@ -130,6 +132,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */ + CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ + CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */ Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h =================================================================== --- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7778.h +++ renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h @@ -20,10 +20,13 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/sh_eth.h> +#include <linux/platform_data/usb-rcar-phy.h> extern void r8a7778_add_standard_devices(void); extern void r8a7778_add_standard_devices_dt(void); extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata); +extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata); +extern void r8a7778_init_late(void); extern void r8a7778_init_delay(void); extern void r8a7778_init_irq(void); extern void r8a7778_init_irq_dt(void); Index: renesas/arch/arm/mach-shmobile/setup-r8a7778.c =================================================================== --- renesas.orig/arch/arm/mach-shmobile/setup-r8a7778.c +++ renesas/arch/arm/mach-shmobile/setup-r8a7778.c @@ -30,6 +30,12 @@ #include <linux/irqchip.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> +#include <linux/pm_runtime.h> +#include <linux/usb/phy.h> +#include <linux/usb/hcd.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <linux/dma-mapping.h> #include <mach/irqs.h> #include <mach/r8a7778.h> #include <mach/common.h> @@ -89,6 +95,99 @@ static struct sh_timer_config sh_tmu1_pl &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) +/* USB PHY */ +static struct resource usb_phy_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70800, 0x100), + DEFINE_RES_MEM(0xffe76000, 0x100), +}; + +void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata) +{ + platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1, + usb_phy_resources, + ARRAY_SIZE(usb_phy_resources), + pdata, sizeof(*pdata)); +} + +/* USB */ +static struct usb_phy *phy; + +static int usb_power_on(struct platform_device *pdev) +{ + if (!phy) + return -EIO; + + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + usb_phy_init(phy); + + return 0; +} + +static void usb_power_off(struct platform_device *pdev) +{ + if (!phy) + return; + + usb_phy_shutdown(phy); + + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); +} + +static int ehci_init_internal_buffer(struct usb_hcd *hcd) +{ + /* + * Below are recommended values from the datasheet; + * see [USB :: Setting of EHCI Internal Buffer]. + */ + /* EHCI IP internal buffer setting */ + iowrite32(0x00ff0040, hcd->regs + 0x0094); + /* EHCI IP internal buffer enable */ + iowrite32(0x00000001, hcd->regs + 0x009C); + + return 0; +} + +static struct usb_ehci_pdata ehci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, + .pre_setup = ehci_init_internal_buffer, +}; + +static struct resource ehci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70000, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +static struct usb_ohci_pdata ohci_pdata __initdata = { + .power_on = usb_power_on, + .power_off = usb_power_off, + .power_suspend = usb_power_off, +}; + +static struct resource ohci_resources[] __initdata = { + DEFINE_RES_MEM(0xffe70400, 0x400), + DEFINE_RES_IRQ(gic_iid(0x4c)), +}; + +#define USB_PLATFORM_INFO(hci) \ +static struct platform_device_info hci##_info __initdata = { \ + .parent = &platform_bus, \ + .name = #hci "-platform", \ + .id = -1, \ + .res = hci##_resources, \ + .num_res = ARRAY_SIZE(hci##_resources), \ + .data = &hci##_pdata, \ + .size_data = sizeof(hci##_pdata), \ + .dma_mask = DMA_BIT_MASK(32), \ +} + +USB_PLATFORM_INFO(ehci); +USB_PLATFORM_INFO(ohci); + /* Ether */ static struct resource ether_resources[] = { DEFINE_RES_MEM(0xfde00000, 0x400), @@ -197,6 +296,14 @@ void __init r8a7778_add_standard_devices r8a7778_register_tmu(1); } +void __init r8a7778_init_late(void) +{ + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + platform_device_register_full(&ehci_info); + platform_device_register_full(&ohci_info); +} + static struct renesas_intc_irqpin_config irqpin_platform_data = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ .sense_bitfield_width = 2, @@ -310,6 +417,7 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8 .init_machine = r8a7778_add_standard_devices_dt, .init_time = shmobile_timer_init, .dt_compat = r8a7778_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END #endif /* CONFIG_USE_OF */ ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support 2013-04-30 23:09 ` Sergei Shtylyov @ 2013-04-30 23:14 ` Sergei Shtylyov -1 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:14 UTC (permalink / raw) To: linux-arm-kernel Register the USB PHY device from bockw_init(), passing the platform data to it. Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to get registered too... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes since version 4: - annotated 'usb_phy_platform_data' as '__initdata' since it's kmemdup()'ed while registering the platform device anyway; - refreshed the patch. Changes since version 3: - removed initializer for 'usb_phy_platform_data' letting it be set to all 0s; - refreshed the patch. Changes since version 2: - refreshed the patch. Changes since the original posting: - removed initializer for no longer existing field in 'usb_phy_platform_data', modified the comment to the 'ferrite_bead' field initializer. arch/arm/mach-shmobile/board-bockw.c | 4 ++++ 1 file changed, 4 insertions(+) Index: renesas/arch/arm/mach-shmobile/board-bockw.c =================================--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c +++ renesas/arch/arm/mach-shmobile/board-bockw.c @@ -63,6 +63,8 @@ static struct sh_mobile_sdhi_info sdhi0_ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, }; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata; + static const struct pinctrl_map bockw_pinctrl_map[] = { /* SCIF0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", @@ -91,6 +93,7 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + r8a7778_add_usb_phy_device(&usb_phy_platform_data); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); @@ -146,4 +149,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_machine = bockw_init, .init_time = shmobile_timer_init, .dt_compat = bockw_boards_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support @ 2013-04-30 23:14 ` Sergei Shtylyov 0 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-04-30 23:14 UTC (permalink / raw) To: linux-arm-kernel Register the USB PHY device from bockw_init(), passing the platform data to it. Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to get registered too... The patch has been tested on the BOCK-W board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes since version 4: - annotated 'usb_phy_platform_data' as '__initdata' since it's kmemdup()'ed while registering the platform device anyway; - refreshed the patch. Changes since version 3: - removed initializer for 'usb_phy_platform_data' letting it be set to all 0s; - refreshed the patch. Changes since version 2: - refreshed the patch. Changes since the original posting: - removed initializer for no longer existing field in 'usb_phy_platform_data', modified the comment to the 'ferrite_bead' field initializer. arch/arm/mach-shmobile/board-bockw.c | 4 ++++ 1 file changed, 4 insertions(+) Index: renesas/arch/arm/mach-shmobile/board-bockw.c =================================================================== --- renesas.orig/arch/arm/mach-shmobile/board-bockw.c +++ renesas/arch/arm/mach-shmobile/board-bockw.c @@ -63,6 +63,8 @@ static struct sh_mobile_sdhi_info sdhi0_ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, }; +static struct rcar_phy_platform_data usb_phy_platform_data __initdata; + static const struct pinctrl_map bockw_pinctrl_map[] = { /* SCIF0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", @@ -91,6 +93,7 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin(1); r8a7778_add_standard_devices(); + r8a7778_add_usb_phy_device(&usb_phy_platform_data); pinctrl_register_mappings(bockw_pinctrl_map, ARRAY_SIZE(bockw_pinctrl_map)); @@ -146,4 +149,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw") .init_machine = bockw_init, .init_time = shmobile_timer_init, .dt_compat = bockw_boards_compat_dt, + .init_late = r8a7778_init_late, MACHINE_END ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support 2013-04-30 23:14 ` Sergei Shtylyov @ 2013-05-07 19:46 ` Sergei Shtylyov -1 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-05-07 19:46 UTC (permalink / raw) To: linux-arm-kernel Hello. On 05/01/2013 03:14 AM, Sergei Shtylyov wrote: > Register the USB PHY device from bockw_init(), passing the platform data to it. > Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to > get registered too... > > The patch has been tested on the BOCK-W board. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Oops, the patch misses the USB pin setup. The USB pin groups in the sh-pfc driver have also not been created. This needs to be addressed in the next iteration... WBR, Sergei ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v6 3/3] ARM: shmobile: BOCK-W: add USB support @ 2013-05-07 19:46 ` Sergei Shtylyov 0 siblings, 0 replies; 8+ messages in thread From: Sergei Shtylyov @ 2013-05-07 19:46 UTC (permalink / raw) To: linux-arm-kernel Hello. On 05/01/2013 03:14 AM, Sergei Shtylyov wrote: > Register the USB PHY device from bockw_init(), passing the platform data to it. > Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to > get registered too... > > The patch has been tested on the BOCK-W board. > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Oops, the patch misses the USB pin setup. The USB pin groups in the sh-pfc driver have also not been created. This needs to be addressed in the next iteration... WBR, Sergei ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-05-07 19:46 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-30 23:09 [PATCH v6 0/3] Add USB support to R8A7778/BOCK-W Sergei Shtylyov 2013-04-30 23:09 ` Sergei Shtylyov 2013-04-30 23:13 ` [PATCH v6 2/3] ARM: shmobile: r8a7778: add USB support Sergei Shtylyov 2013-04-30 23:13 ` Sergei Shtylyov 2013-04-30 23:14 ` [PATCH v6 3/3] ARM: shmobile: BOCK-W: " Sergei Shtylyov 2013-04-30 23:14 ` Sergei Shtylyov 2013-05-07 19:46 ` Sergei Shtylyov 2013-05-07 19:46 ` Sergei Shtylyov
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.