From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: Re: [PATCH V3 15/21] thermal: exynos: Add support to handle many instances of TMU
Date: Thu, 9 May 2013 10:53:06 -0400 [thread overview]
Message-ID: <518BB852.6080400@ti.com> (raw)
In-Reply-To: <1367931671-3906-16-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 8699 bytes --]
On 07-05-2013 09:01, Amit Daniel Kachhap wrote:
> This patch adds support to handle multiple instances of the TMU controllers.
> This is done by removing the static structure to register with the core thermal
> and creating it dynamically for each instance of the TMU controller. The
> interrupt is made shared type to handle interrupts for all the TMU. Also
> the identifier of the TMU controller is extracted from device tree alias.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
> drivers/thermal/samsung/exynos_tmu.c | 125 +++++++++++++++++++++++-----------
> 1 files changed, 84 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index bdf40ef..94d6e8e 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -29,6 +29,8 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
> @@ -36,9 +38,24 @@
> #include "exynos_tmu.h"
> #include "exynos_tmu_data.h"
>
> +/**
> + * struct exynos_tmu_data : A structure to hold the private data of the TMU
> + driver
> + * @id: identifier of the one instance of the TMU controller.
> + * @pdata: pointer to the tmu platform/configuration data
> + * @base: base address of the single instance of the TMU controller.
> + * @irq: irq number of the TMU controller.
> + * @soc: id of the SOC type.
> + * @irq_work: pointer to the irq work structure.
> + * @lock: lock to implement synchronization.
> + * @clk: pointer to the clock structure.
> + * @temp_error1: fused value of the first point trim.
> + * @temp_error2: fused value of the second point trim.
> + * @reg_conf: pointer to structure to register with core thermal.
> + */
> struct exynos_tmu_data {
> + int id;
> struct exynos_tmu_platform_data *pdata;
> - struct resource *mem;
> void __iomem *base;
> int irq;
> enum soc_type soc;
> @@ -46,6 +63,7 @@ struct exynos_tmu_data {
> struct mutex lock;
> struct clk *clk;
> u8 temp_error1, temp_error2;
> + struct thermal_sensor_conf *reg_conf;
> };
>
> /*
> @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> { return -EINVAL; }
> #endif/*CONFIG_THERMAL_EMULATION*/
>
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> - .name = "exynos-therm",
> - .read_temperature = (int (*)(void *))exynos_tmu_read,
> - .write_emul_temp = exynos_tmu_set_emulation,
> -};
> -
> static void exynos_tmu_work(struct work_struct *work)
> {
> struct exynos_tmu_data *data = container_of(work,
> @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work)
> struct exynos_tmu_registers *reg = pdata->registers;
> unsigned int val_irq;
>
> - exynos_report_trigger(&exynos_sensor_conf);
> + exynos_report_trigger(data->reg_conf);
> mutex_lock(&data->lock);
> clk_enable(data->clk);
>
> @@ -405,10 +417,42 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
> platform_get_device_id(pdev)->driver_data;
> }
>
> +static int exynos_map_dt_data(struct platform_device *pdev)
> +{
> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> + struct resource res;
> +
> + if (!data)
> + return -ENODEV;
> +
> + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
> + if (data->id < 0)
> + data->id = 0;
> +
> + data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> + if (data->irq <= 0) {
> + dev_err(&pdev->dev, "failed to get IRQ\n");
> + return -ENODEV;
> + }
> +
> + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
> + dev_err(&pdev->dev, "failed to get Resource\n");
> + return -ENODEV;
> + }
> +
> + data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
> + if (!data->base) {
> + dev_err(&pdev->dev, "Failed to ioremap memory\n");
> + return -ENOMEM;
looks like the statement below fits better here:
return ERR_PTR(-EADDRNOTAVAIL);
> + }
blank line?
> + return 0;
> +}
> +
> static int exynos_tmu_probe(struct platform_device *pdev)
> {
> struct exynos_tmu_data *data;
> struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> + struct thermal_sensor_conf *sensor_conf;
> int ret, i;
>
> if (!pdata)
> @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> - data->irq = platform_get_irq(pdev, 0);
> - if (data->irq < 0) {
> - dev_err(&pdev->dev, "Failed to get platform irq\n");
> - return data->irq;
> - }
> -
> - INIT_WORK(&data->irq_work, exynos_tmu_work);
> -
> - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!data->mem) {
> - dev_err(&pdev->dev, "Failed to get platform resource\n");
> - return -ENOENT;
> - }
> + data->pdata = pdata;
> + platform_set_drvdata(pdev, data);
> + mutex_init(&data->lock);
>
> - data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> - if (IS_ERR(data->base))
> - return PTR_ERR(data->base);
> + ret = exynos_map_dt_data(pdev);
> + if (ret)
> + return ret;
>
> + INIT_WORK(&data->irq_work, exynos_tmu_work);
> ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> - IRQF_TRIGGER_RISING, "exynos-tmu", data);
> + IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
> if (ret) {
> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> return ret;
> @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> goto err_clk;
> }
>
> - data->pdata = pdata;
> - platform_set_drvdata(pdev, data);
> - mutex_init(&data->lock);
> -
> ret = exynos_tmu_initialize(pdev);
> if (ret) {
> dev_err(&pdev->dev, "Failed to initialize TMU\n");
> @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>
> exynos_tmu_control(pdev, true);
>
> - /* Register the sensor with thermal management interface */
> - (&exynos_sensor_conf)->driver_data = data;
> - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
> + /* Allocate a structure to register with the exynos core thermal */
> + sensor_conf = devm_kzalloc(&pdev->dev,
> + sizeof(struct thermal_sensor_conf), GFP_KERNEL);
> + if (!sensor_conf) {
> + dev_err(&pdev->dev, "Failed to allocate registration struct\n");
> + ret = -ENOMEM;
> + goto err_clk;
> + }
> + data->reg_conf = sensor_conf;
> + sprintf(sensor_conf->name, "therm_zone%d", data->id);
> + sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
> + sensor_conf->write_emul_temp =
> + (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> + sensor_conf->driver_data = data;
> + sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
> pdata->trigger_enable[1] + pdata->trigger_enable[2]+
> pdata->trigger_enable[3];
>
> - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> - exynos_sensor_conf.trip_data.trip_val[i] =
> + for (i = 0; i < sensor_conf->trip_data.trip_count; i++)
> + sensor_conf->trip_data.trip_val[i] =
> pdata->threshold + pdata->trigger_levels[i];
>
> - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> + sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
>
> - exynos_sensor_conf.cooling_data.freq_clip_count =
> - pdata->freq_tab_count;
> + sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
> for (i = 0; i < pdata->freq_tab_count; i++) {
> - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> + sensor_conf->cooling_data.freq_data[i].freq_clip_max =
> pdata->freq_tab[i].freq_clip_max;
> - exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> + sensor_conf->cooling_data.freq_data[i].temp_level =
> pdata->freq_tab[i].temp_level;
> }
>
> - ret = exynos_register_thermal(&exynos_sensor_conf);
> + /* Register the sensor with thermal management interface */
> + ret = exynos_register_thermal(sensor_conf);
> if (ret) {
> dev_err(&pdev->dev, "Failed to register thermal interface\n");
> goto err_clk;
> @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>
> exynos_tmu_control(pdev, false);
>
> - exynos_unregister_thermal(&exynos_sensor_conf);
> + exynos_unregister_thermal(data->reg_conf);
>
> clk_unprepare(data->clk);
>
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: <linux-pm@vger.kernel.org>, Zhang Rui <rui.zhang@intel.com>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <amit.kachhap@gmail.com>,
Kukjin Kim <kgene.kim@samsung.com>,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: Re: [PATCH V3 15/21] thermal: exynos: Add support to handle many instances of TMU
Date: Thu, 9 May 2013 10:53:06 -0400 [thread overview]
Message-ID: <518BB852.6080400@ti.com> (raw)
In-Reply-To: <1367931671-3906-16-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 8699 bytes --]
On 07-05-2013 09:01, Amit Daniel Kachhap wrote:
> This patch adds support to handle multiple instances of the TMU controllers.
> This is done by removing the static structure to register with the core thermal
> and creating it dynamically for each instance of the TMU controller. The
> interrupt is made shared type to handle interrupts for all the TMU. Also
> the identifier of the TMU controller is extracted from device tree alias.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
> drivers/thermal/samsung/exynos_tmu.c | 125 +++++++++++++++++++++++-----------
> 1 files changed, 84 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index bdf40ef..94d6e8e 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -29,6 +29,8 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
> @@ -36,9 +38,24 @@
> #include "exynos_tmu.h"
> #include "exynos_tmu_data.h"
>
> +/**
> + * struct exynos_tmu_data : A structure to hold the private data of the TMU
> + driver
> + * @id: identifier of the one instance of the TMU controller.
> + * @pdata: pointer to the tmu platform/configuration data
> + * @base: base address of the single instance of the TMU controller.
> + * @irq: irq number of the TMU controller.
> + * @soc: id of the SOC type.
> + * @irq_work: pointer to the irq work structure.
> + * @lock: lock to implement synchronization.
> + * @clk: pointer to the clock structure.
> + * @temp_error1: fused value of the first point trim.
> + * @temp_error2: fused value of the second point trim.
> + * @reg_conf: pointer to structure to register with core thermal.
> + */
> struct exynos_tmu_data {
> + int id;
> struct exynos_tmu_platform_data *pdata;
> - struct resource *mem;
> void __iomem *base;
> int irq;
> enum soc_type soc;
> @@ -46,6 +63,7 @@ struct exynos_tmu_data {
> struct mutex lock;
> struct clk *clk;
> u8 temp_error1, temp_error2;
> + struct thermal_sensor_conf *reg_conf;
> };
>
> /*
> @@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> { return -EINVAL; }
> #endif/*CONFIG_THERMAL_EMULATION*/
>
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> - .name = "exynos-therm",
> - .read_temperature = (int (*)(void *))exynos_tmu_read,
> - .write_emul_temp = exynos_tmu_set_emulation,
> -};
> -
> static void exynos_tmu_work(struct work_struct *work)
> {
> struct exynos_tmu_data *data = container_of(work,
> @@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work)
> struct exynos_tmu_registers *reg = pdata->registers;
> unsigned int val_irq;
>
> - exynos_report_trigger(&exynos_sensor_conf);
> + exynos_report_trigger(data->reg_conf);
> mutex_lock(&data->lock);
> clk_enable(data->clk);
>
> @@ -405,10 +417,42 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
> platform_get_device_id(pdev)->driver_data;
> }
>
> +static int exynos_map_dt_data(struct platform_device *pdev)
> +{
> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> + struct resource res;
> +
> + if (!data)
> + return -ENODEV;
> +
> + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
> + if (data->id < 0)
> + data->id = 0;
> +
> + data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> + if (data->irq <= 0) {
> + dev_err(&pdev->dev, "failed to get IRQ\n");
> + return -ENODEV;
> + }
> +
> + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
> + dev_err(&pdev->dev, "failed to get Resource\n");
> + return -ENODEV;
> + }
> +
> + data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
> + if (!data->base) {
> + dev_err(&pdev->dev, "Failed to ioremap memory\n");
> + return -ENOMEM;
looks like the statement below fits better here:
return ERR_PTR(-EADDRNOTAVAIL);
> + }
blank line?
> + return 0;
> +}
> +
> static int exynos_tmu_probe(struct platform_device *pdev)
> {
> struct exynos_tmu_data *data;
> struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> + struct thermal_sensor_conf *sensor_conf;
> int ret, i;
>
> if (!pdata)
> @@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> - data->irq = platform_get_irq(pdev, 0);
> - if (data->irq < 0) {
> - dev_err(&pdev->dev, "Failed to get platform irq\n");
> - return data->irq;
> - }
> -
> - INIT_WORK(&data->irq_work, exynos_tmu_work);
> -
> - data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!data->mem) {
> - dev_err(&pdev->dev, "Failed to get platform resource\n");
> - return -ENOENT;
> - }
> + data->pdata = pdata;
> + platform_set_drvdata(pdev, data);
> + mutex_init(&data->lock);
>
> - data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> - if (IS_ERR(data->base))
> - return PTR_ERR(data->base);
> + ret = exynos_map_dt_data(pdev);
> + if (ret)
> + return ret;
>
> + INIT_WORK(&data->irq_work, exynos_tmu_work);
> ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> - IRQF_TRIGGER_RISING, "exynos-tmu", data);
> + IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
> if (ret) {
> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> return ret;
> @@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> goto err_clk;
> }
>
> - data->pdata = pdata;
> - platform_set_drvdata(pdev, data);
> - mutex_init(&data->lock);
> -
> ret = exynos_tmu_initialize(pdev);
> if (ret) {
> dev_err(&pdev->dev, "Failed to initialize TMU\n");
> @@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>
> exynos_tmu_control(pdev, true);
>
> - /* Register the sensor with thermal management interface */
> - (&exynos_sensor_conf)->driver_data = data;
> - exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
> + /* Allocate a structure to register with the exynos core thermal */
> + sensor_conf = devm_kzalloc(&pdev->dev,
> + sizeof(struct thermal_sensor_conf), GFP_KERNEL);
> + if (!sensor_conf) {
> + dev_err(&pdev->dev, "Failed to allocate registration struct\n");
> + ret = -ENOMEM;
> + goto err_clk;
> + }
> + data->reg_conf = sensor_conf;
> + sprintf(sensor_conf->name, "therm_zone%d", data->id);
> + sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
> + sensor_conf->write_emul_temp =
> + (int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> + sensor_conf->driver_data = data;
> + sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
> pdata->trigger_enable[1] + pdata->trigger_enable[2]+
> pdata->trigger_enable[3];
>
> - for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
> - exynos_sensor_conf.trip_data.trip_val[i] =
> + for (i = 0; i < sensor_conf->trip_data.trip_count; i++)
> + sensor_conf->trip_data.trip_val[i] =
> pdata->threshold + pdata->trigger_levels[i];
>
> - exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> + sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
>
> - exynos_sensor_conf.cooling_data.freq_clip_count =
> - pdata->freq_tab_count;
> + sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
> for (i = 0; i < pdata->freq_tab_count; i++) {
> - exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> + sensor_conf->cooling_data.freq_data[i].freq_clip_max =
> pdata->freq_tab[i].freq_clip_max;
> - exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> + sensor_conf->cooling_data.freq_data[i].temp_level =
> pdata->freq_tab[i].temp_level;
> }
>
> - ret = exynos_register_thermal(&exynos_sensor_conf);
> + /* Register the sensor with thermal management interface */
> + ret = exynos_register_thermal(sensor_conf);
> if (ret) {
> dev_err(&pdev->dev, "Failed to register thermal interface\n");
> goto err_clk;
> @@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>
> exynos_tmu_control(pdev, false);
>
> - exynos_unregister_thermal(&exynos_sensor_conf);
> + exynos_unregister_thermal(data->reg_conf);
>
> clk_unprepare(data->clk);
>
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
next prev parent reply other threads:[~2013-05-09 14:53 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-07 13:00 [PATCH V3 0/20] thermal: exynos: Add thermal driver for exynos5440 Amit Daniel Kachhap
2013-05-07 13:00 ` [PATCH V3 01/21] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-05-07 13:07 ` [RESEND PATCH " Amit Daniel Kachhap
2013-05-08 15:49 ` Eduardo Valentin
2013-05-08 15:49 ` Eduardo Valentin
2013-05-09 2:15 ` amit daniel kachhap
2013-05-07 13:00 ` [PATCH V3 02/21] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-05-07 13:41 ` Zhang Rui
2013-05-08 3:49 ` amit daniel kachhap
2013-05-08 16:01 ` Eduardo Valentin
2013-05-08 16:01 ` Eduardo Valentin
2013-05-09 5:15 ` amit daniel kachhap
2013-05-07 13:00 ` [PATCH V3 03/21] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-05-10 15:12 ` Eduardo Valentin
2013-05-10 15:12 ` Eduardo Valentin
2013-05-07 13:00 ` [PATCH V3 04/21] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-05-09 13:28 ` Eduardo Valentin
2013-05-09 13:28 ` Eduardo Valentin
2013-05-10 1:53 ` amit daniel kachhap
2013-05-07 13:00 ` [PATCH V3 05/21] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-05-09 13:39 ` Eduardo Valentin
2013-05-09 13:39 ` Eduardo Valentin
2013-05-10 2:05 ` amit daniel kachhap
2013-05-07 13:00 ` [PATCH V3 06/21] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-05-09 13:52 ` Eduardo Valentin
2013-05-09 13:52 ` Eduardo Valentin
2013-05-10 2:12 ` amit daniel kachhap
2013-05-07 13:00 ` [PATCH V3 07/21] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-05-07 13:00 ` [PATCH V3 08/21] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-05-07 13:00 ` [PATCH V3 09/21] thermal: exynos: Move register definitions from driver file to data file Amit Daniel Kachhap
2013-05-09 14:32 ` Eduardo Valentin
2013-05-09 14:32 ` Eduardo Valentin
2013-05-10 2:17 ` amit daniel kachhap
2013-05-10 14:14 ` Eduardo Valentin
2013-05-10 14:14 ` Eduardo Valentin
2013-05-13 1:35 ` amit daniel kachhap
2013-05-07 13:01 ` [PATCH V3 10/21] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-05-09 14:33 ` Eduardo Valentin
2013-05-09 14:33 ` Eduardo Valentin
2013-05-10 2:22 ` amit daniel kachhap
2013-05-10 15:40 ` Eduardo Valentin
2013-05-10 15:40 ` Eduardo Valentin
2013-05-13 1:36 ` amit daniel kachhap
2013-05-07 13:01 ` [PATCH V3 11/21] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 12/21] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 13/21] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 14/21] thermal: exynos: Make the zone handling dependent on trip count Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 15/21] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-05-09 14:53 ` Eduardo Valentin [this message]
2013-05-09 14:53 ` Eduardo Valentin
2013-05-10 2:32 ` amit daniel kachhap
2013-05-07 13:01 ` [PATCH V3 16/21] thermal: exynos: Add features to check instead of using SOC type Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 17/21] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 18/21] thermal: exynos: Add support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-05-09 14:47 ` Eduardo Valentin
2013-05-09 14:47 ` Eduardo Valentin
2013-05-10 2:31 ` amit daniel kachhap
2013-05-10 14:14 ` Eduardo Valentin
2013-05-10 14:14 ` Eduardo Valentin
2013-05-07 13:01 ` [PATCH V3 19/21] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-05-07 13:01 ` [PATCH V3 20/21] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-05-09 14:44 ` Eduardo Valentin
2013-05-09 14:44 ` Eduardo Valentin
2013-05-10 2:28 ` amit daniel kachhap
2013-05-10 16:05 ` Eduardo Valentin
2013-05-10 16:05 ` Eduardo Valentin
2013-05-07 13:01 ` [PATCH V3 21/21] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=518BB852.6080400@ti.com \
--to=eduardo.valentin@ti.com \
--cc=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.