Re: [PATCH v4 06/12] ARM: dove: add gigabit ethernet and mvmdio device tree nodes

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 05/22/2013 07:48 PM, Jason Cooper wrote:
> On Wed, May 22, 2013 at 07:42:36PM +0200, Sebastian Hesselbarth wrote:
>> Hmm, maybe a little bit too early. While restoring the MAC address now
>> works, another bug arises which I guess is related with phy setup
>> and aneg.
>>
>> Will investigate and update patch set accordingly.
>
> Cool, chances are, we should be able to take that patch in by itself for
> this merge window...

Which patch do you mean? The local-mac-address workaround will only be
available for DT mv643xx_eth because it uses the DT node to store the
MAC.

Anyway, I found the bit that caused the other issue. It is the
Clk125_Bypass_En bit in PORT_SERIAL_CONTROL1 register. What bothers me
about it is:
- Only Dove and Kirkwood have the bit, MV78x00 doesn't have it, Orion5x
   doesn't have the register at all. With ppc mv64x60 I can only guess,
   but think it is like in Orion5x.
- Reset value of that bit should be 0, but after gating clock on
   Kirkwood it is set to 1 causing wrong port clock to be selected.
   Also Thomas Petazzoni confirmed that it is set after reset so
   either FS is wrong about it or BootROM messes with it.
- Kirkwood and Dove FS tell me that port link must be down when you
   change the bit.

As I can't be sure about how mv643xx_eth will behave on other platforms
except Kirkwood and Dove when writing that register, I tend to force
that bit to zero in the driver but only for those two by #ifdefs.

Sebastian