From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] net: phy: prevent linking breakage
Date: Mon, 27 May 2013 19:37:26 +0200 [thread overview]
Message-ID: <51A399D6.8030000@free-electrons.com> (raw)
In-Reply-To: <20130527163913.GO32299@pengutronix.de>
On 27/05/2013 18:39, Sascha Hauer wrote:
> On Mon, May 27, 2013 at 06:18:42PM +0200, Alexandre Belloni wrote:
>> phy_register_fixup{,_for_uid,_for_id} are called from arch/, quite
>> often, there is no protection to check whether CONFIG_PHYLIB=y which is
>> the only case where this would work. Having phylib as a module or not
>> compiled at all will result in that kind of linking failure:
>>
>> arch/arm/mach-at91/built-in.o: In function `ksz9021rn_phy_fixup':
>> :(.text+0x1174): undefined reference to `mdiobus_write'
>> :(.text+0x1188): undefined reference to `mdiobus_write'
>> :(.text+0x119c): undefined reference to `mdiobus_write'
>> :(.text+0x11b0): undefined reference to `mdiobus_write'
>> arch/arm/mach-at91/built-in.o: In function `sama5_dt_device_init':
>> :(.init.text+0x1e34): undefined reference to `phy_register_fixup_for_uid'
>>
>> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>> ---
>> drivers/net/phy/phy_device.c | 6 ++++++
>> include/linux/phy.h | 12 ++++++++++++
>> 2 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 3657b4a..df36367 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -64,6 +64,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
>> u32 flags, phy_interface_t interface);
>>
>> /*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> +/*
>> * Creates a new phy_fixup and adds it to the list
>> * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
>> * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
>> @@ -109,6 +114,7 @@ int phy_register_fixup_for_id(const char *bus_id,
>> return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
>> }
>> EXPORT_SYMBOL(phy_register_fixup_for_id);
>> +#endif /* CONFIG_PHYLIB */
>>
>> /*
>> * Returns 1 if fixup matches phydev in bus_id and phy_uid.
>> diff --git a/include/linux/phy.h b/include/linux/phy.h
>> index 9e11039..3f998a6 100644
>> --- a/include/linux/phy.h
>> +++ b/include/linux/phy.h
>> @@ -556,12 +556,24 @@ int phy_start_interrupts(struct phy_device *phydev);
>> void phy_print_status(struct phy_device *phydev);
>> void phy_device_free(struct phy_device *phydev);
>>
>> +/*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + * Defining stubs allows to prevent linking errors.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_id(const char *bus_id,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> +#else
>> +#define phy_register_fixup(a, b, c, d) do { } while (0)
>> +#define phy_register_fixup_for_id(a, b) do { } while (0)
>> +#define phy_register_fixup_for_uid(a, b, c) do { } while (0)
> Use static inline functions here. This breaks if someone does result
> checking on the functions which then expands to ret = do {} while (0);
> Also we still have type safety for !CONFIG_PHYLIB.
Right, I tried that first but forgot static so I had issues with
redefinition of the functions. I even played with __weak at some point...
I'll wait a bit for comments before sending v2.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Russell King <linux@arm.linux.org.uk>,
Shawn Guo <shawn.guo@linaro.org>,
Sascha Hauer <kernel@pengutronix.de>
Subject: Re: [PATCH 1/3] net: phy: prevent linking breakage
Date: Mon, 27 May 2013 19:37:26 +0200 [thread overview]
Message-ID: <51A399D6.8030000@free-electrons.com> (raw)
In-Reply-To: <20130527163913.GO32299@pengutronix.de>
On 27/05/2013 18:39, Sascha Hauer wrote:
> On Mon, May 27, 2013 at 06:18:42PM +0200, Alexandre Belloni wrote:
>> phy_register_fixup{,_for_uid,_for_id} are called from arch/, quite
>> often, there is no protection to check whether CONFIG_PHYLIB=y which is
>> the only case where this would work. Having phylib as a module or not
>> compiled at all will result in that kind of linking failure:
>>
>> arch/arm/mach-at91/built-in.o: In function `ksz9021rn_phy_fixup':
>> :(.text+0x1174): undefined reference to `mdiobus_write'
>> :(.text+0x1188): undefined reference to `mdiobus_write'
>> :(.text+0x119c): undefined reference to `mdiobus_write'
>> :(.text+0x11b0): undefined reference to `mdiobus_write'
>> arch/arm/mach-at91/built-in.o: In function `sama5_dt_device_init':
>> :(.init.text+0x1e34): undefined reference to `phy_register_fixup_for_uid'
>>
>> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>> ---
>> drivers/net/phy/phy_device.c | 6 ++++++
>> include/linux/phy.h | 12 ++++++++++++
>> 2 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 3657b4a..df36367 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -64,6 +64,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
>> u32 flags, phy_interface_t interface);
>>
>> /*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> +/*
>> * Creates a new phy_fixup and adds it to the list
>> * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
>> * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
>> @@ -109,6 +114,7 @@ int phy_register_fixup_for_id(const char *bus_id,
>> return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
>> }
>> EXPORT_SYMBOL(phy_register_fixup_for_id);
>> +#endif /* CONFIG_PHYLIB */
>>
>> /*
>> * Returns 1 if fixup matches phydev in bus_id and phy_uid.
>> diff --git a/include/linux/phy.h b/include/linux/phy.h
>> index 9e11039..3f998a6 100644
>> --- a/include/linux/phy.h
>> +++ b/include/linux/phy.h
>> @@ -556,12 +556,24 @@ int phy_start_interrupts(struct phy_device *phydev);
>> void phy_print_status(struct phy_device *phydev);
>> void phy_device_free(struct phy_device *phydev);
>>
>> +/*
>> + * phy_register_fixup{,_for_uid,_for_id} are called from arch/ so this won't
>> + * work unless phylib is compiled in the kernel.
>> + * Defining stubs allows to prevent linking errors.
>> + */
>> +#ifdef CONFIG_PHYLIB
>> int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_id(const char *bus_id,
>> int (*run)(struct phy_device *));
>> int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
>> int (*run)(struct phy_device *));
>> +#else
>> +#define phy_register_fixup(a, b, c, d) do { } while (0)
>> +#define phy_register_fixup_for_id(a, b) do { } while (0)
>> +#define phy_register_fixup_for_uid(a, b, c) do { } while (0)
> Use static inline functions here. This breaks if someone does result
> checking on the functions which then expands to ret = do {} while (0);
> Also we still have type safety for !CONFIG_PHYLIB.
Right, I tried that first but forgot static so I had issues with
redefinition of the functions. I even played with __weak at some point...
I'll wait a bit for comments before sending v2.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2013-05-27 17:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-27 16:18 [PATCH 0/3] net: phy: prevent linking breakage Alexandre Belloni
2013-05-27 16:18 ` Alexandre Belloni
2013-05-27 16:18 ` [PATCH 1/3] " Alexandre Belloni
2013-05-27 16:18 ` Alexandre Belloni
2013-05-27 16:39 ` Sascha Hauer
2013-05-27 16:39 ` Sascha Hauer
2013-05-27 17:37 ` Alexandre Belloni [this message]
2013-05-27 17:37 ` Alexandre Belloni
2013-05-27 22:20 ` Florian Fainelli
2013-05-27 22:20 ` Florian Fainelli
2013-05-27 16:18 ` [PATCH 2/3] arm: mxs: don't check for CONFIG_PHYLIB as builtin Alexandre Belloni
2013-05-27 16:18 ` Alexandre Belloni
2013-05-27 16:18 ` [PATCH 3/3] arm: imx: " Alexandre Belloni
2013-05-27 16:18 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A399D6.8030000@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.