* How can I change the install path of the rootfs?
@ 2013-05-29 9:17 Sebastian Süsens
2013-05-29 9:24 ` Burton, Ross
0 siblings, 1 reply; 3+ messages in thread
From: Sebastian Süsens @ 2013-05-29 9:17 UTC (permalink / raw)
To: yocto
Hello,
I want to install scripts in a folder names can. My bitbake file looks
following:
DESCRIPTION = "Test scripts for testing xxsq701 interfaces"
SECTION = "test_applications"
PR = "r0"
PN = "test-scripts"
LICENSE = "${MYC_LICENSE}"
LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"
S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"
do_install() {
echo "DO_INSTALL: install test-scripts to ${D}/can"
install -d ${D}/can
install -m 0777 ${S}/can/init_can.sh ${D}/can
}
When I run bitbake I get following error:
WARNING: QA Issue: test-scripts: Files/directories were installed but
not shipped
/can
/can/init_can.sh
And bitbakes break off with this message:
Unable to resolve package test-scripts
When I replace can with ${bindir} it works.
How can I change the install path of the rootfs?
--
------------------------------------------------------------------------
Sebastian Süsens Tel. +49 4321 559 56-27
mycable GmbH Fax +49 4321 559 56-10
Gartenstrasse 10
24534 Neumuenster, Germany Email su@mycable.de
------------------------------------------------------------------------
mycable GmbH, Managing Director: Michael Carstens-Behrens
USt-IdNr: DE 214 231 199, Amtsgericht Kiel, HRB 1797 NM
------------------------------------------------------------------------
This e-mail and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed. If you have received this e-mail in error,
please notify the sender and delete all copies from your system.
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: How can I change the install path of the rootfs?
2013-05-29 9:17 How can I change the install path of the rootfs? Sebastian Süsens
@ 2013-05-29 9:24 ` Burton, Ross
2013-05-29 9:26 ` Sebastian Süsens
0 siblings, 1 reply; 3+ messages in thread
From: Burton, Ross @ 2013-05-29 9:24 UTC (permalink / raw)
To: Sebastian Süsens; +Cc: yocto
On 29 May 2013 10:17, Sebastian Süsens <su@mycable.de> wrote:
> I want to install scripts in a folder names can. My bitbake file looks
> following:
>
> DESCRIPTION = "Test scripts for testing xxsq701 interfaces"
> SECTION = "test_applications"
> PR = "r0"
> PN = "test-scripts"
> LICENSE = "${MYC_LICENSE}"
> LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"
>
> S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"
>
> do_install() {
> echo "DO_INSTALL: install test-scripts to ${D}/can"
> install -d ${D}/can
> install -m 0777 ${S}/can/init_can.sh ${D}/can
> }
>
> When I run bitbake I get following error:
> WARNING: QA Issue: test-scripts: Files/directories were installed but
> not shipped
> /can
> /can/init_can.sh
>
>
> And bitbakes break off with this message:
> Unable to resolve package test-scripts
>
>
> When I replace can with ${bindir} it works.
>
> How can I change the install path of the rootfs?
If you want to install stuff into a non-standard path then you'll need
to redefine the FILES_ variables (which defaults to $bindir and so on,
for convenience). In this case, FILES_${PN} = "/can" will be
sufficient.
http://www.yoctoproject.org/docs/1.4/ref-manual/ref-manual.html#var-FILES
is the relevant section in the reference documentation.
Ross
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: How can I change the install path of the rootfs?
2013-05-29 9:24 ` Burton, Ross
@ 2013-05-29 9:26 ` Sebastian Süsens
0 siblings, 0 replies; 3+ messages in thread
From: Sebastian Süsens @ 2013-05-29 9:26 UTC (permalink / raw)
To: Burton, Ross; +Cc: yocto
On 05/29/2013 11:24 AM, Burton, Ross wrote:
> On 29 May 2013 10:17, Sebastian Süsens <su@mycable.de> wrote:
>> I want to install scripts in a folder names can. My bitbake file looks
>> following:
>>
>> DESCRIPTION = "Test scripts for testing xxsq701 interfaces"
>> SECTION = "test_applications"
>> PR = "r0"
>> PN = "test-scripts"
>> LICENSE = "${MYC_LICENSE}"
>> LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"
>>
>> S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"
>>
>> do_install() {
>> echo "DO_INSTALL: install test-scripts to ${D}/can"
>> install -d ${D}/can
>> install -m 0777 ${S}/can/init_can.sh ${D}/can
>> }
>>
>> When I run bitbake I get following error:
>> WARNING: QA Issue: test-scripts: Files/directories were installed but
>> not shipped
>> /can
>> /can/init_can.sh
>>
>>
>> And bitbakes break off with this message:
>> Unable to resolve package test-scripts
>>
>>
>> When I replace can with ${bindir} it works.
>>
>> How can I change the install path of the rootfs?
> If you want to install stuff into a non-standard path then you'll need
> to redefine the FILES_ variables (which defaults to $bindir and so on,
> for convenience). In this case, FILES_${PN} = "/can" will be
> sufficient.
>
> http://www.yoctoproject.org/docs/1.4/ref-manual/ref-manual.html#var-FILES
> is the relevant section in the reference documentation.
>
> Ross
Thank you.
--
------------------------------------------------------------------------
Sebastian Süsens Tel. +49 4321 559 56-27
mycable GmbH Fax +49 4321 559 56-10
Gartenstrasse 10
24534 Neumuenster, Germany Email su@mycable.de
------------------------------------------------------------------------
mycable GmbH, Managing Director: Michael Carstens-Behrens
USt-IdNr: DE 214 231 199, Amtsgericht Kiel, HRB 1797 NM
------------------------------------------------------------------------
This e-mail and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed. If you have received this e-mail in error,
please notify the sender and delete all copies from your system.
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-05-29 9:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-29 9:17 How can I change the install path of the rootfs? Sebastian Süsens
2013-05-29 9:24 ` Burton, Ross
2013-05-29 9:26 ` Sebastian Süsens
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.