[PATCH RFC 3/3] clk: dt: binding for basic divider clock

[sboyd@codeaurora.org (Stephen Boyd)]

On 06/03/13 10:53, Mike Turquette wrote:
> +Required properties:
> +- compatible : shall be "divider-clock".
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : link to phandle of parent clock
> +- reg : base address for register controlling adjustable divider
> +- mask : arbitrary bitmask for programming the adjustable divider
> +
> +Optional properties:
> +- clock-output-names : From common clock binding.
> +- table : array of integer pairs defining divisors & bitfield values
> +- shift : number of bits to shift the mask, defaults to 0 if not present
> +- index_one : valid divisor programming starts at 1, not zero
> +- index_power_of_two : valid divisor programming must be a power of two
> +- allow_zero : implies index_one, and programming zero results in
> +  divide-by-one

It's preferred that property names have dashes instead of underscores.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation