* Re: LIC_FILES_CHKSUM points to an invalid file
@ 2013-06-05 19:17 Zafrullah Syed
2013-06-05 19:43 ` Gary Thomas
2013-06-06 4:41 ` Gaurang Shastri
0 siblings, 2 replies; 3+ messages in thread
From: Zafrullah Syed @ 2013-06-05 19:17 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 4232 bytes --]
I am getting these errors when I try my build. Any Idea?
ERROR: Function failed: hello: LIC_FILES_CHKSUM points to an invalid file:
/home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/hello-1.0/COPYING
ERROR: Logfile of failure stored in:
/home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/temp/log.do_configure.1985
Screen shot of the above error directory. http://imgur.com/zRLKuYj
hello-1.0 is empty but hello-2.7 has all the files extracted.
Why does hello-1.0 exist when i did not include it in my recipe.
my hello.bb recipe:
DESCRIPTION = "GNU Helloworld application"
SECTION = "examples"
LICENSE = "GPLv3+"
LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
PR = "r0"
SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
SRC_URI[sha256sum] =
"fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
inherit autotools gettext
Any ideas about this error?
Thank You,
On Tue, Jun 4, 2013 at 9:45 PM, Zafrullah Syed <zafrullahmehdi@gmail.com>wrote:
> Hi,
>
> I followed all the instructions and i started my build again. Build
> successfully started and struck with Hello md5sum error.
>
> ERROR: Fetcher failure for URL: '
> ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz'. No checksum specified for
> /home/siguser/yocto2013-05-21/build/downloads/hello-2.7.tar.gz, please add
> at least one to the recipe:
> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
> SRC_URI[sha256sum] =
> "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
>
>
> I downloaded hello-2.7 from ftp://ftp.gnu.org/gnu/hello/ unzipped and ran
> md5sum against COPYING file. Each file has different md5sum, which md5sum
> should I include in my hello.bb file?
>
> *My hello.bb file*:
>
> DESCRIPTION = "GNU Helloworld application"
> SECTION = "examples"
> LICENSE = "GPLv3+"
> LIC_FILES_CHKSUM = "file://COPYING;md5=fc01b05c7f943d3c42124942a2a9bb3a"
> PR = "r0"
> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
> inherit autotools gettext
>
> Thank You,
>
>
>
>
> On Tue, Jun 4, 2013 at 3:57 PM, Paul Eggleton <
> paul.eggleton@linux.intel.com> wrote:
>
>> On Tuesday 04 June 2013 15:42:06 Zafrullah Syed wrote:
>> > On Tue, Jun 4, 2013 at 3:26 PM, Paul Eggleton <
>> paul.eggleton@linux.intel.com
>> > wrote:
>> > > Yes, conf/bblayers.conf is supposed to be in the build directory; and
>> > > whichever build directory you are actually using. The build directory
>> can
>> > > be anywhere, but you shouldn't really have two build directories
>> unless
>> > > you know what you are doing - did you perhaps run oe-init-build-env
>> with
>> > > no arguments in two different places? I suspect this is what has
>> happened.
>> >
>> > I think yes. I usually give just *source oe-init-build-env *command,
>> this
>> > is how i used earlier and failed. May be that is the reason it has
>> created
>> > another build directory in /poky.
>> > What should be the command before building? i guess this(
>> > TEMPLATECONF=meta-gumstix-extras/conf
>> > source ./poky/oe-init-build-env ). so, every time i just need to give
>> > TEMPLATECONF command before building?
>>
>> You need to run oe-init-build-env at the start of every session yes, but
>> you
>> shouldn't need to specify TEMPLATECONF except when you first create the
>> build
>> directory. The important thing is you need to be in the same directory
>> when
>> you run oe-init-build-env *or* specify the path to the build directory as
>> a
>> parameter.
>>
>> > Lastly, my meta-bebot directory should be as following ?
>> >
>> > /poky
>> > --meta-bebot
>> > --conf
>> > --layer.conf
>> > --recipes-bebot
>> > --hello
>> > --hello.bb
>>
>> If you have recipes-bebot under meta-bebot, yes.
>>
>> > and meta-bebot path should be set in bblayers.conf file?
>>
>> Yes.
>>
>> Cheers,
>> Paul
>>
>> --
>>
>> Paul Eggleton
>> Intel Open Source Technology Centre
>>
>
>
>
> --
> Regards,
> Zafrullah Syed
>
>
--
Regards,
Zafrullah Syed
[-- Attachment #2: Type: text/html, Size: 7531 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: LIC_FILES_CHKSUM points to an invalid file
2013-06-05 19:17 LIC_FILES_CHKSUM points to an invalid file Zafrullah Syed
@ 2013-06-05 19:43 ` Gary Thomas
2013-06-06 4:41 ` Gaurang Shastri
1 sibling, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2013-06-05 19:43 UTC (permalink / raw)
To: yocto
On 2013-06-05 13:17, Zafrullah Syed wrote:
> I am getting these errors when I try my build. Any Idea?
>
> ERROR: Function failed: hello: LIC_FILES_CHKSUM points to an invalid file:
> /home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/hello-1.0/COPYING
>
> ERROR: Logfile of failure stored in: /home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/temp/log.do_configure.1985
>
> Screen shot of the above error directory. http://imgur.com/zRLKuYj
>
> hello-1.0 is empty but hello-2.7 has all the files extracted.
>
> Why does hello-1.0 exist when i did not include it in my recipe.
>
> my hello.bb <http://hello.bb> recipe:
>
> DESCRIPTION = "GNU Helloworld application"
> SECTION = "examples"
> LICENSE = "GPLv3+"
> LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
> PR = "r0"
> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
> SRC_URI[sha256sum] = "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
> inherit autotools gettext
>
> Any ideas about this error?
Your recipe doesn't seem to have a version number. Try renaming hello.bb to hello_2.7.bb
>
> Thank You,
>
> On Tue, Jun 4, 2013 at 9:45 PM, Zafrullah Syed <zafrullahmehdi@gmail.com <mailto:zafrullahmehdi@gmail.com>> wrote:
>
> Hi,
>
> I followed all the instructions and i started my build again. Build successfully started and struck with Hello md5sum error.
>
> ERROR: Fetcher failure for URL: 'ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz'. No checksum specified for /home/siguser/yocto2013-05-21/build/downloads/hello-2.7.tar.gz, please
> add at least one to the recipe:
> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
> SRC_URI[sha256sum] = "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
>
>
> I downloaded hello-2.7 from ftp://ftp.gnu.org/gnu/hello/ unzipped and ran md5sum against COPYING file. Each file has different md5sum, which md5sum should I include in my
> hello.bb <http://hello.bb> file?
>
> _My hello.bb <http://hello.bb> file_:
>
> DESCRIPTION = "GNU Helloworld application"
> SECTION = "examples"
> LICENSE = "GPLv3+"
> LIC_FILES_CHKSUM = "file://COPYING;md5=fc01b05c7f943d3c42124942a2a9bb3a"
> PR = "r0"
> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
> inherit autotools gettext
>
> Thank You,
>
>
>
>
> On Tue, Jun 4, 2013 at 3:57 PM, Paul Eggleton <paul.eggleton@linux.intel.com <mailto:paul.eggleton@linux.intel.com>> wrote:
>
> On Tuesday 04 June 2013 15:42:06 Zafrullah Syed wrote:
> > On Tue, Jun 4, 2013 at 3:26 PM, Paul Eggleton <paul.eggleton@linux.intel.com <mailto:paul.eggleton@linux.intel.com>
> > wrote:
> > > Yes, conf/bblayers.conf is supposed to be in the build directory; and
> > > whichever build directory you are actually using. The build directory can
> > > be anywhere, but you shouldn't really have two build directories unless
> > > you know what you are doing - did you perhaps run oe-init-build-env with
> > > no arguments in two different places? I suspect this is what has happened.
> >
> > I think yes. I usually give just *source oe-init-build-env *command, this
> > is how i used earlier and failed. May be that is the reason it has created
> > another build directory in /poky.
> > What should be the command before building? i guess this(
> > TEMPLATECONF=meta-gumstix-extras/conf
> > source ./poky/oe-init-build-env ). so, every time i just need to give
> > TEMPLATECONF command before building?
>
> You need to run oe-init-build-env at the start of every session yes, but you
> shouldn't need to specify TEMPLATECONF except when you first create the build
> directory. The important thing is you need to be in the same directory when
> you run oe-init-build-env *or* specify the path to the build directory as a
> parameter.
>
> > Lastly, my meta-bebot directory should be as following ?
> >
> > /poky
> > --meta-bebot
> > --conf
> > --layer.conf
> > --recipes-bebot
> > --hello
> > --hello.bb <http://hello.bb>
>
> If you have recipes-bebot under meta-bebot, yes.
>
> > and meta-bebot path should be set in bblayers.conf file?
>
> Yes.
>
> Cheers,
> Paul
>
> --
>
> Paul Eggleton
> Intel Open Source Technology Centre
>
>
>
>
> --
> Regards,
> Zafrullah Syed
>
>
>
>
> --
> Regards,
> Zafrullah Syed
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: LIC_FILES_CHKSUM points to an invalid file
2013-06-05 19:17 LIC_FILES_CHKSUM points to an invalid file Zafrullah Syed
2013-06-05 19:43 ` Gary Thomas
@ 2013-06-06 4:41 ` Gaurang Shastri
1 sibling, 0 replies; 3+ messages in thread
From: Gaurang Shastri @ 2013-06-06 4:41 UTC (permalink / raw)
To: Zafrullah Syed; +Cc: yocto@yoctoproject.org
[-- Attachment #1: Type: text/plain, Size: 4797 bytes --]
hi,
can you try with "bitbake -c cleanall hello" , change the recipe name from
hello.bb -> hello_2.7.bb and do "bitbake hello"
//Gaurang Shastri
On Thu, Jun 6, 2013 at 12:47 AM, Zafrullah Syed <zafrullahmehdi@gmail.com>wrote:
> I am getting these errors when I try my build. Any Idea?
>
> ERROR: Function failed: hello: LIC_FILES_CHKSUM points to an invalid file:
> /home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/hello-1.0/COPYING
>
> ERROR: Logfile of failure stored in:
> /home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/temp/log.do_configure.1985
>
> Screen shot of the above error directory. http://imgur.com/zRLKuYj
>
> hello-1.0 is empty but hello-2.7 has all the files extracted.
>
> Why does hello-1.0 exist when i did not include it in my recipe.
>
> my hello.bb recipe:
>
> DESCRIPTION = "GNU Helloworld application"
> SECTION = "examples"
> LICENSE = "GPLv3+"
> LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
> PR = "r0"
> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
> SRC_URI[sha256sum] =
> "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
> inherit autotools gettext
>
> Any ideas about this error?
>
> Thank You,
>
> On Tue, Jun 4, 2013 at 9:45 PM, Zafrullah Syed <zafrullahmehdi@gmail.com>wrote:
>
>> Hi,
>>
>> I followed all the instructions and i started my build again. Build
>> successfully started and struck with Hello md5sum error.
>>
>> ERROR: Fetcher failure for URL: '
>> ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz'. No checksum specified for
>> /home/siguser/yocto2013-05-21/build/downloads/hello-2.7.tar.gz, please add
>> at least one to the recipe:
>> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
>> SRC_URI[sha256sum] =
>> "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
>>
>>
>> I downloaded hello-2.7 from ftp://ftp.gnu.org/gnu/hello/ unzipped and
>> ran md5sum against COPYING file. Each file has different md5sum, which
>> md5sum should I include in my hello.bb file?
>>
>> *My hello.bb file*:
>>
>> DESCRIPTION = "GNU Helloworld application"
>> SECTION = "examples"
>> LICENSE = "GPLv3+"
>> LIC_FILES_CHKSUM = "file://COPYING;md5=fc01b05c7f943d3c42124942a2a9bb3a"
>> PR = "r0"
>> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
>> inherit autotools gettext
>>
>> Thank You,
>>
>>
>>
>>
>> On Tue, Jun 4, 2013 at 3:57 PM, Paul Eggleton <
>> paul.eggleton@linux.intel.com> wrote:
>>
>>> On Tuesday 04 June 2013 15:42:06 Zafrullah Syed wrote:
>>> > On Tue, Jun 4, 2013 at 3:26 PM, Paul Eggleton <
>>> paul.eggleton@linux.intel.com
>>> > wrote:
>>> > > Yes, conf/bblayers.conf is supposed to be in the build directory; and
>>> > > whichever build directory you are actually using. The build
>>> directory can
>>> > > be anywhere, but you shouldn't really have two build directories
>>> unless
>>> > > you know what you are doing - did you perhaps run oe-init-build-env
>>> with
>>> > > no arguments in two different places? I suspect this is what has
>>> happened.
>>> >
>>> > I think yes. I usually give just *source oe-init-build-env *command,
>>> this
>>> > is how i used earlier and failed. May be that is the reason it has
>>> created
>>> > another build directory in /poky.
>>> > What should be the command before building? i guess this(
>>> > TEMPLATECONF=meta-gumstix-extras/conf
>>> > source ./poky/oe-init-build-env ). so, every time i just need to give
>>> > TEMPLATECONF command before building?
>>>
>>> You need to run oe-init-build-env at the start of every session yes, but
>>> you
>>> shouldn't need to specify TEMPLATECONF except when you first create the
>>> build
>>> directory. The important thing is you need to be in the same directory
>>> when
>>> you run oe-init-build-env *or* specify the path to the build directory
>>> as a
>>> parameter.
>>>
>>> > Lastly, my meta-bebot directory should be as following ?
>>> >
>>> > /poky
>>> > --meta-bebot
>>> > --conf
>>> > --layer.conf
>>> > --recipes-bebot
>>> > --hello
>>> > --hello.bb
>>>
>>> If you have recipes-bebot under meta-bebot, yes.
>>>
>>> > and meta-bebot path should be set in bblayers.conf file?
>>>
>>> Yes.
>>>
>>> Cheers,
>>> Paul
>>>
>>> --
>>>
>>> Paul Eggleton
>>> Intel Open Source Technology Centre
>>>
>>
>>
>>
>> --
>> Regards,
>> Zafrullah Syed
>>
>>
>
>
> --
> Regards,
> Zafrullah Syed
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>
[-- Attachment #2: Type: text/html, Size: 8720 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-06-06 4:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-05 19:17 LIC_FILES_CHKSUM points to an invalid file Zafrullah Syed
2013-06-05 19:43 ` Gary Thomas
2013-06-06 4:41 ` Gaurang Shastri
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.