From: Sricharan R <r.sricharan@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
tony@atomide.com, rnayak@ti.com, b-cousson@ti.com,
Roger Quadros <rogerq@ti.com>
Subject: Re: [PATCH 2/4] ARM: dts: omap5-uevm: Add USB Host support
Date: Fri, 7 Jun 2013 11:38:00 +0530 [thread overview]
Message-ID: <51B178C0.1040901@ti.com> (raw)
In-Reply-To: <20130606184617.GA25579@kahuna>
On Friday 07 June 2013 12:16 AM, Nishanth Menon wrote:
> On 23:21-20130606, Sricharan R wrote:
>> Hi,
>> On Wednesday 05 June 2013 07:27 PM, Nishanth Menon wrote:
>>> On 12:16-20130605, Sricharan R wrote:
>>>> From: Roger Quadros <rogerq@ti.com>
>>> [...]
>>>> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
>>>> index 843a001..cf862df 100644
>>>> --- a/arch/arm/boot/dts/omap5-uevm.dts
>>>> +++ b/arch/arm/boot/dts/omap5-uevm.dts
>>> <snip>
>>>> + /* hsusb2_phy is clocked by FREF_CLK1 i.e. auxclk1 */
>>>> + clock_alias {
>>>> + clock-name = "auxclk1_ck";
>>>> + clock-alias = "main_clk";
>>> is'nt this better to use with clock node?
>> Roger was suggesting to remove this for now. Postedhen
>> V2 following that.
>> Are you suggesting to go with your clock-binding patch ?
> you cannot. Mike has already rejected that approach and I have dropped
> that series and wont be following up.
> See discussion https://patchwork.kernel.org/patch/2541331/
>
> instead the new approach being discussed
> https://patchwork.kernel.org/patch/2657351/ and related discussions is
> the way to go.
>
> That said, it practically blocks introduction of all code that depend on
> dts nodes :(, no matter how I dont like being blocked and my many series
> delayed, I believe Mike, Tero, Rajendra are doing the right architecture
> and we should wait for it's upstream introduction.
>
> That is just my 2 cents.
>
Thanks for the details. So dropping the alias for now, should be fine.
Regards,
Sricharan
WARNING: multiple messages have this Message-ID (diff)
From: r.sricharan@ti.com (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: dts: omap5-uevm: Add USB Host support
Date: Fri, 7 Jun 2013 11:38:00 +0530 [thread overview]
Message-ID: <51B178C0.1040901@ti.com> (raw)
In-Reply-To: <20130606184617.GA25579@kahuna>
On Friday 07 June 2013 12:16 AM, Nishanth Menon wrote:
> On 23:21-20130606, Sricharan R wrote:
>> Hi,
>> On Wednesday 05 June 2013 07:27 PM, Nishanth Menon wrote:
>>> On 12:16-20130605, Sricharan R wrote:
>>>> From: Roger Quadros <rogerq@ti.com>
>>> [...]
>>>> diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
>>>> index 843a001..cf862df 100644
>>>> --- a/arch/arm/boot/dts/omap5-uevm.dts
>>>> +++ b/arch/arm/boot/dts/omap5-uevm.dts
>>> <snip>
>>>> + /* hsusb2_phy is clocked by FREF_CLK1 i.e. auxclk1 */
>>>> + clock_alias {
>>>> + clock-name = "auxclk1_ck";
>>>> + clock-alias = "main_clk";
>>> is'nt this better to use with clock node?
>> Roger was suggesting to remove this for now. Postedhen
>> V2 following that.
>> Are you suggesting to go with your clock-binding patch ?
> you cannot. Mike has already rejected that approach and I have dropped
> that series and wont be following up.
> See discussion https://patchwork.kernel.org/patch/2541331/
>
> instead the new approach being discussed
> https://patchwork.kernel.org/patch/2657351/ and related discussions is
> the way to go.
>
> That said, it practically blocks introduction of all code that depend on
> dts nodes :(, no matter how I dont like being blocked and my many series
> delayed, I believe Mike, Tero, Rajendra are doing the right architecture
> and we should wait for it's upstream introduction.
>
> That is just my 2 cents.
>
Thanks for the details. So dropping the alias for now, should be fine.
Regards,
Sricharan
next prev parent reply other threads:[~2013-06-07 6:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-05 6:46 [PATCH 0/4] ARM: dts: omap5: Cleanup and updates for DT files Sricharan R
2013-06-05 6:46 ` Sricharan R
2013-06-05 6:46 ` [PATCH 1/4] ARM: dts: omap5: Rename omap5-evm to omap5-uevm Sricharan R
2013-06-05 6:46 ` Sricharan R
2013-06-05 6:50 ` Sricharan R
2013-06-05 6:50 ` Sricharan R
2013-06-05 6:46 ` [PATCH 2/4] ARM: dts: omap5-uevm: Add USB Host support Sricharan R
2013-06-05 6:46 ` Sricharan R
2013-06-05 7:59 ` Florian Vaussard
2013-06-05 7:59 ` Florian Vaussard
2013-06-05 9:12 ` Sricharan R
2013-06-05 9:12 ` Sricharan R
2013-06-05 12:15 ` Florian Vaussard
2013-06-05 12:15 ` Florian Vaussard
2013-06-05 10:32 ` Roger Quadros
2013-06-05 10:32 ` Roger Quadros
2013-06-05 11:50 ` Sricharan R
2013-06-05 11:50 ` Sricharan R
2013-06-05 13:57 ` Nishanth Menon
2013-06-05 13:57 ` Nishanth Menon
2013-06-06 17:51 ` Sricharan R
2013-06-06 17:51 ` Sricharan R
2013-06-06 18:46 ` Nishanth Menon
2013-06-06 18:46 ` Nishanth Menon
2013-06-07 6:08 ` Sricharan R [this message]
2013-06-07 6:08 ` Sricharan R
2013-06-05 6:46 ` [PATCH 3/4] ARM: dts: omap5-uevm: Add LED support for uEVM blue LED Sricharan R
2013-06-05 6:46 ` Sricharan R
2013-06-05 17:04 ` Dan Murphy
2013-06-05 17:04 ` Dan Murphy
2013-06-06 17:52 ` Sricharan R
2013-06-06 17:52 ` Sricharan R
2013-06-05 6:46 ` [PATCH 4/4] ARM: dts: omap5-uevm: Add uart pinctrl data Sricharan R
2013-06-05 6:46 ` Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B178C0.1040901@ti.com \
--to=r.sricharan@ti.com \
--cc=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=rnayak@ti.com \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.