From: Archit Taneja <archit@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH 11/32] OMAPDRM: fix overlay manager handling
Date: Fri, 07 Jun 2013 06:33:56 +0000 [thread overview]
Message-ID: <51B17C04.9070106@ti.com> (raw)
In-Reply-To: <1369906493-27538-12-git-send-email-tomi.valkeinen@ti.com>
On Thursday 30 May 2013 03:04 PM, Tomi Valkeinen wrote:
> Currently omapdrm creates crtcs, which map directly to DSS overlay
> managers, only on demand at init time. This would make it difficult to
> manage connecting the display entities in the future, as the code cannot
> just search for a suitable overlay manager.
>
> We cannot fix this the sane way, which would be to create crtcs for each
> overlay manager, because we need an overlay for each crtc. With limited
> number of overlays, that's not possible.
>
> So the solution for now is to detach the overlay manager from the crtc.
> crtcs are still created on demand at init time, but all overlay managers
> are always initialized by the omapdss.
>
> This way we can create and connect whole display pipelines from the
> overlay manager to the display, regardless of which crtcs omapdrm would
> create.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/omap_crtc.c | 22 +++++++++++++++-------
> drivers/gpu/drm/omapdrm/omap_drv.c | 2 ++
> drivers/gpu/drm/omapdrm/omap_drv.h | 1 +
> drivers/video/omap2/dss/apply.c | 3 ---
> drivers/video/omap2/dss/dispc.c | 4 ++++
> 5 files changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
> index 79b200a..02075bf 100644
> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> @@ -40,7 +40,7 @@ struct omap_crtc {
> * mgr->id.) Eventually this will be replaced w/ something
> * more common-panel-framework-y
> */
> - struct omap_overlay_manager mgr;
> + struct omap_overlay_manager *mgr;
>
> struct omap_video_timings timings;
> bool enabled;
> @@ -90,6 +90,9 @@ uint32_t pipe2vbl(struct drm_crtc *crtc)
> * job of sequencing the setup of the video pipe in the proper order
> */
>
> +/* ovl-mgr-id -> crtc */
> +static struct omap_crtc *omap_crtcs[8];
> +
> /* we can probably ignore these until we support command-mode panels: */
> static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
> {
> @@ -107,7 +110,7 @@ static void omap_crtc_disable(struct omap_overlay_manager *mgr)
> static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> - struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
> DBG("%s", omap_crtc->name);
> omap_crtc->timings = *timings;
> omap_crtc->full_update = true;
> @@ -116,7 +119,7 @@ static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
> static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr,
> const struct dss_lcd_mgr_config *config)
> {
> - struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
> DBG("%s", omap_crtc->name);
> dispc_mgr_set_lcd_config(omap_crtc->channel, config);
> }
> @@ -569,7 +572,7 @@ static void omap_crtc_pre_apply(struct omap_drm_apply *apply)
> } else {
> if (encoder) {
> omap_encoder_set_enabled(encoder, false);
> - omap_encoder_update(encoder, &omap_crtc->mgr,
> + omap_encoder_update(encoder, omap_crtc->mgr,
> &omap_crtc->timings);
> omap_encoder_set_enabled(encoder, true);
> omap_crtc->full_update = false;
> @@ -595,6 +598,11 @@ static const char *channel_names[] = {
> [OMAP_DSS_CHANNEL_LCD2] = "lcd2",
> };
Since we are creating overlay managers structs now, we could get rid of
the channel_names strings above and use mgr->name instead. Not
necessary, of course.
Archit
>
> +void omap_crtc_pre_init(void)
> +{
> + dss_install_mgr_ops(&mgr_ops);
> +}
> +
> /* initialize crtc */
> struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> struct drm_plane *plane, enum omap_channel channel, int id)
> @@ -635,9 +643,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> omap_irq_register(dev, &omap_crtc->error_irq);
>
> /* temporary: */
> - omap_crtc->mgr.id = channel;
> -
> - dss_install_mgr_ops(&mgr_ops);
> + omap_crtc->mgr = omap_dss_get_overlay_manager(channel);
>
> /* TODO: fix hard-coded setup.. add properties! */
> info = &omap_crtc->info;
> @@ -651,6 +657,8 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
>
> omap_plane_install_properties(omap_crtc->plane, &crtc->base);
>
> + omap_crtcs[channel] = omap_crtc;
> +
> return crtc;
>
> fail:
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index 691e760..f8947f9 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -98,6 +98,8 @@ static int omap_modeset_init(struct drm_device *dev)
> int num_crtcs;
> int i, id = 0;
>
> + omap_crtc_pre_init();
> +
> drm_mode_config_init(dev);
>
> omap_drm_irq_install(dev);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index 215a20d..14f17da 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -157,6 +157,7 @@ const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc);
> enum omap_channel omap_crtc_channel(struct drm_crtc *crtc);
> int omap_crtc_apply(struct drm_crtc *crtc,
> struct omap_drm_apply *apply);
> +void omap_crtc_pre_init(void);
> struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> struct drm_plane *plane, enum omap_channel channel, int id);
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 74d1d00..c844071 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1577,7 +1577,6 @@ int omapdss_compat_init(void)
>
> apply_init_priv();
>
> - dss_init_overlay_managers();
> dss_init_overlay_managers_sysfs(pdev);
> dss_init_overlays(pdev);
>
> @@ -1642,7 +1641,6 @@ err_disp_sysfs:
>
> err_mgr_ops:
> dss_uninit_overlay_managers_sysfs(pdev);
> - dss_uninit_overlay_managers();
> dss_uninit_overlays(pdev);
>
> compat_refcnt--;
> @@ -1671,7 +1669,6 @@ void omapdss_compat_uninit(void)
> dss_uninstall_mgr_ops();
>
> dss_uninit_overlay_managers_sysfs(pdev);
> - dss_uninit_overlay_managers();
> dss_uninit_overlays(pdev);
> out:
> mutex_unlock(&compat_init_lock);
> diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
> index b33b016..83d7bb9 100644
> --- a/drivers/video/omap2/dss/dispc.c
> +++ b/drivers/video/omap2/dss/dispc.c
> @@ -3710,6 +3710,8 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
>
> dispc_runtime_put();
>
> + dss_init_overlay_managers();
> +
> dss_debugfs_create_file("dispc", dispc_dump_regs);
>
> return 0;
> @@ -3723,6 +3725,8 @@ static int __exit omap_dispchw_remove(struct platform_device *pdev)
> {
> pm_runtime_disable(&pdev->dev);
>
> + dss_uninit_overlay_managers();
> +
> return 0;
> }
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Archit Taneja <archit@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH 11/32] OMAPDRM: fix overlay manager handling
Date: Fri, 7 Jun 2013 11:51:56 +0530 [thread overview]
Message-ID: <51B17C04.9070106@ti.com> (raw)
In-Reply-To: <1369906493-27538-12-git-send-email-tomi.valkeinen@ti.com>
On Thursday 30 May 2013 03:04 PM, Tomi Valkeinen wrote:
> Currently omapdrm creates crtcs, which map directly to DSS overlay
> managers, only on demand at init time. This would make it difficult to
> manage connecting the display entities in the future, as the code cannot
> just search for a suitable overlay manager.
>
> We cannot fix this the sane way, which would be to create crtcs for each
> overlay manager, because we need an overlay for each crtc. With limited
> number of overlays, that's not possible.
>
> So the solution for now is to detach the overlay manager from the crtc.
> crtcs are still created on demand at init time, but all overlay managers
> are always initialized by the omapdss.
>
> This way we can create and connect whole display pipelines from the
> overlay manager to the display, regardless of which crtcs omapdrm would
> create.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/omap_crtc.c | 22 +++++++++++++++-------
> drivers/gpu/drm/omapdrm/omap_drv.c | 2 ++
> drivers/gpu/drm/omapdrm/omap_drv.h | 1 +
> drivers/video/omap2/dss/apply.c | 3 ---
> drivers/video/omap2/dss/dispc.c | 4 ++++
> 5 files changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
> index 79b200a..02075bf 100644
> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> @@ -40,7 +40,7 @@ struct omap_crtc {
> * mgr->id.) Eventually this will be replaced w/ something
> * more common-panel-framework-y
> */
> - struct omap_overlay_manager mgr;
> + struct omap_overlay_manager *mgr;
>
> struct omap_video_timings timings;
> bool enabled;
> @@ -90,6 +90,9 @@ uint32_t pipe2vbl(struct drm_crtc *crtc)
> * job of sequencing the setup of the video pipe in the proper order
> */
>
> +/* ovl-mgr-id -> crtc */
> +static struct omap_crtc *omap_crtcs[8];
> +
> /* we can probably ignore these until we support command-mode panels: */
> static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
> {
> @@ -107,7 +110,7 @@ static void omap_crtc_disable(struct omap_overlay_manager *mgr)
> static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> - struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
> DBG("%s", omap_crtc->name);
> omap_crtc->timings = *timings;
> omap_crtc->full_update = true;
> @@ -116,7 +119,7 @@ static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
> static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr,
> const struct dss_lcd_mgr_config *config)
> {
> - struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
> + struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
> DBG("%s", omap_crtc->name);
> dispc_mgr_set_lcd_config(omap_crtc->channel, config);
> }
> @@ -569,7 +572,7 @@ static void omap_crtc_pre_apply(struct omap_drm_apply *apply)
> } else {
> if (encoder) {
> omap_encoder_set_enabled(encoder, false);
> - omap_encoder_update(encoder, &omap_crtc->mgr,
> + omap_encoder_update(encoder, omap_crtc->mgr,
> &omap_crtc->timings);
> omap_encoder_set_enabled(encoder, true);
> omap_crtc->full_update = false;
> @@ -595,6 +598,11 @@ static const char *channel_names[] = {
> [OMAP_DSS_CHANNEL_LCD2] = "lcd2",
> };
Since we are creating overlay managers structs now, we could get rid of
the channel_names strings above and use mgr->name instead. Not
necessary, of course.
Archit
>
> +void omap_crtc_pre_init(void)
> +{
> + dss_install_mgr_ops(&mgr_ops);
> +}
> +
> /* initialize crtc */
> struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> struct drm_plane *plane, enum omap_channel channel, int id)
> @@ -635,9 +643,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> omap_irq_register(dev, &omap_crtc->error_irq);
>
> /* temporary: */
> - omap_crtc->mgr.id = channel;
> -
> - dss_install_mgr_ops(&mgr_ops);
> + omap_crtc->mgr = omap_dss_get_overlay_manager(channel);
>
> /* TODO: fix hard-coded setup.. add properties! */
> info = &omap_crtc->info;
> @@ -651,6 +657,8 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
>
> omap_plane_install_properties(omap_crtc->plane, &crtc->base);
>
> + omap_crtcs[channel] = omap_crtc;
> +
> return crtc;
>
> fail:
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index 691e760..f8947f9 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -98,6 +98,8 @@ static int omap_modeset_init(struct drm_device *dev)
> int num_crtcs;
> int i, id = 0;
>
> + omap_crtc_pre_init();
> +
> drm_mode_config_init(dev);
>
> omap_drm_irq_install(dev);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index 215a20d..14f17da 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -157,6 +157,7 @@ const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc);
> enum omap_channel omap_crtc_channel(struct drm_crtc *crtc);
> int omap_crtc_apply(struct drm_crtc *crtc,
> struct omap_drm_apply *apply);
> +void omap_crtc_pre_init(void);
> struct drm_crtc *omap_crtc_init(struct drm_device *dev,
> struct drm_plane *plane, enum omap_channel channel, int id);
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 74d1d00..c844071 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1577,7 +1577,6 @@ int omapdss_compat_init(void)
>
> apply_init_priv();
>
> - dss_init_overlay_managers();
> dss_init_overlay_managers_sysfs(pdev);
> dss_init_overlays(pdev);
>
> @@ -1642,7 +1641,6 @@ err_disp_sysfs:
>
> err_mgr_ops:
> dss_uninit_overlay_managers_sysfs(pdev);
> - dss_uninit_overlay_managers();
> dss_uninit_overlays(pdev);
>
> compat_refcnt--;
> @@ -1671,7 +1669,6 @@ void omapdss_compat_uninit(void)
> dss_uninstall_mgr_ops();
>
> dss_uninit_overlay_managers_sysfs(pdev);
> - dss_uninit_overlay_managers();
> dss_uninit_overlays(pdev);
> out:
> mutex_unlock(&compat_init_lock);
> diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
> index b33b016..83d7bb9 100644
> --- a/drivers/video/omap2/dss/dispc.c
> +++ b/drivers/video/omap2/dss/dispc.c
> @@ -3710,6 +3710,8 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
>
> dispc_runtime_put();
>
> + dss_init_overlay_managers();
> +
> dss_debugfs_create_file("dispc", dispc_dump_regs);
>
> return 0;
> @@ -3723,6 +3725,8 @@ static int __exit omap_dispchw_remove(struct platform_device *pdev)
> {
> pm_runtime_disable(&pdev->dev);
>
> + dss_uninit_overlay_managers();
> +
> return 0;
> }
>
>
next prev parent reply other threads:[~2013-06-07 6:33 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 9:34 [PATCH 00/32] OMAPDSS: dss-dev-model "base" (Part 1/2) Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 01/32] OMAPDSS: add pdata->default_display_name Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 02/32] OMAPDSS: only probe pdata if there's one Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 03/32] OMAPDSS: add omap_dss_find_output() Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 11:07 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:07 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:40 ` Tomi Valkeinen
2013-05-30 11:40 ` Tomi Valkeinen
2013-05-30 15:40 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:40 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:54 ` Tomi Valkeinen
2013-05-30 16:54 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 04/32] OMAPDSS: add omap_dss_find_output_by_node() Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 05/32] OMAPDSS: fix dss_get_ctx_loss_count for DT Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 11:09 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:09 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:28 ` Tomi Valkeinen
2013-05-30 11:28 ` Tomi Valkeinen
2013-05-30 15:43 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:43 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:14 ` Tomi Valkeinen
2013-05-30 16:14 ` Tomi Valkeinen
2013-05-30 16:36 ` Kevin Hilman
2013-05-30 16:36 ` Kevin Hilman
2013-05-30 17:21 ` Tomi Valkeinen
2013-05-30 17:21 ` Tomi Valkeinen
2013-05-31 15:17 ` Grygorii Strashko
2013-05-31 15:17 ` Grygorii Strashko
2013-05-31 19:31 ` Kevin Hilman
2013-05-31 19:31 ` Kevin Hilman
2013-05-30 9:34 ` [PATCH 06/32] OMAPDSS: DPI: fix regulators " Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 11:12 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:12 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 11:35 ` Tomi Valkeinen
2013-05-30 11:35 ` Tomi Valkeinen
2013-05-30 13:05 ` Arnd Bergmann
2013-05-30 13:05 ` Arnd Bergmann
2013-05-30 15:54 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 15:54 ` Jean-Christophe PLAGNIOL-VILLARD
2013-06-07 5:56 ` Archit Taneja
2013-06-07 5:57 ` Archit Taneja
2013-05-30 9:34 ` [PATCH 07/32] OMAPDSS: SDI: " Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 08/32] OMAPDSS: clean up dss_[ovl|mgr]_get_device() Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 09/32] OMAPDSS: add helpers to get mgr or output from display Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 10/32] OMAPDSS: split overlay manager creation Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 6:19 ` Archit Taneja
2013-06-07 6:31 ` Archit Taneja
2013-06-07 9:53 ` Tomi Valkeinen
2013-06-07 9:53 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 11/32] OMAPDRM: fix overlay manager handling Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 6:21 ` Archit Taneja [this message]
2013-06-07 6:33 ` Archit Taneja
2013-05-30 9:34 ` [PATCH 12/32] OMAPDSS: Implement display (dis)connect support Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 6:46 ` Archit Taneja
2013-06-07 6:58 ` Archit Taneja
2013-06-07 8:31 ` Tomi Valkeinen
2013-06-07 8:31 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 13/32] OMAPDSS: CORE: use devm_regulator_get Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 14/32] OMAPDSS: DSI: cleanup regulator init Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 6:49 ` Archit Taneja
2013-06-07 6:50 ` Archit Taneja
2013-05-30 9:34 ` [PATCH 15/32] OMAPDSS: DPI: cleanup pll & " Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 6:51 ` Archit Taneja
2013-06-07 6:52 ` Archit Taneja
2013-06-07 8:45 ` Tomi Valkeinen
2013-06-07 8:45 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 16/32] OMAPDSS: HDMI: add hdmi_init_regulator Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 17/32] OMAPDSS: SDI: clean up regulator init Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 18/32] OMAPDSS: VENC: " Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 19/32] OMAPDSS: add videomode conversion support Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-06-07 7:06 ` Archit Taneja
2013-06-07 7:18 ` Archit Taneja
2013-06-07 8:35 ` Tomi Valkeinen
2013-06-07 8:35 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 20/32] OMAPDSS: remove dssdev uses in trivial cases Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 21/32] OMAPDSS: add panel list Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 22/32] OMAPDSS: use the panel list in omap_dss_get_next_device Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 23/32] OMAPDSS: don't use dss bus in suspend/resume Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 24/32] OMAPDSS: implement display sysfs without dss bus Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 25/32] OMAPDSS: Add panel dev pointer to dssdev Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 26/32] OMAPDSS: remove omap_dss_start/stop_device() Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 27/32] OMAPDSS: combine omap_dss_output into omap_dss_device Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 28/32] OMAPDSS: omapdss.h: add owner field to omap_dss_device Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 29/32] OMAPDSS: add module_get/put to omap_dss_get/put_device() Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 30/32] OMAPDSS: add THIS_MODULE owner to DSS outputs Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 31/32] OMAPDSS: output: increase refcount in find_output funcs Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
2013-05-30 9:34 ` [PATCH 32/32] OMAPFB: use EPROBE_DEFER if default display is not present Tomi Valkeinen
2013-05-30 9:34 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B17C04.9070106@ti.com \
--to=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.