From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Florian Vaussard <florian.vaussard@epfl.ch>
Cc: Benoit Cousson <b-cousson@ti.com>,
Tony Lindgren <tony@atomide.com>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node
Date: Tue, 11 Jun 2013 17:35:21 +0200 [thread overview]
Message-ID: <51B743B9.3070809@collabora.co.uk> (raw)
In-Reply-To: <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch>
On 06/11/2013 04:49 PM, Florian Vaussard wrote:
> The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the
> corresponding node into the DT. The regulators are not designed
> to be turned off.
>
> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
> ---
> arch/arm/boot/dts/omap3-tobi.dts | 48 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 48 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
> index c7eebbf..dea726f 100644
> --- a/arch/arm/boot/dts/omap3-tobi.dts
> +++ b/arch/arm/boot/dts/omap3-tobi.dts
> @@ -24,6 +24,54 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + vddvario: regulator-vddvario {
> + compatible = "regulator-fixed";
> + regulator-name = "vddvario";
> + regulator-always-on;
> + };
> +
> + vdd33a: regulator-vdd33a {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd33a";
> + regulator-always-on;
> + };
> +};
> +
> +&gpmc {
> + ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
> +
> + ethernet@5,0 {
> + compatible = "smsc,lan9221", "smsc,lan9115";
> + reg = <5 0 0xff>;
> + bank-width = <2>;
> +
> + gpmc,mux-add-data;
> + gpmc,cs-on-ns = <0>;
> + gpmc,cs-rd-off-ns = <42>;
> + gpmc,cs-wr-off-ns = <36>;
> + gpmc,adv-on-ns = <6>;
> + gpmc,adv-rd-off-ns = <12>;
> + gpmc,adv-wr-off-ns = <12>;
> + gpmc,oe-on-ns = <0>;
> + gpmc,oe-off-ns = <42>;
> + gpmc,we-on-ns = <0>;
> + gpmc,we-off-ns = <36>;
> + gpmc,rd-cycle-ns = <60>;
> + gpmc,wr-cycle-ns = <54>;
> + gpmc,access-ns = <36>;
> + gpmc,page-burst-access-ns = <0>;
> + gpmc,bus-turnaround-ns = <0>;
> + gpmc,cycle2cycle-delay-ns = <0>;
> + gpmc,wr-data-mux-bus-ns = <18>;
> + gpmc,wr-access-ns = <42>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
> +
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176*/
> + reg-io-width = <4>;
> + };
> };
>
> &i2c3 {
>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node
Date: Tue, 11 Jun 2013 17:35:21 +0200 [thread overview]
Message-ID: <51B743B9.3070809@collabora.co.uk> (raw)
In-Reply-To: <1370962189-9689-3-git-send-email-florian.vaussard@epfl.ch>
On 06/11/2013 04:49 PM, Florian Vaussard wrote:
> The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the
> corresponding node into the DT. The regulators are not designed
> to be turned off.
>
> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
> ---
> arch/arm/boot/dts/omap3-tobi.dts | 48 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 48 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
> index c7eebbf..dea726f 100644
> --- a/arch/arm/boot/dts/omap3-tobi.dts
> +++ b/arch/arm/boot/dts/omap3-tobi.dts
> @@ -24,6 +24,54 @@
> linux,default-trigger = "heartbeat";
> };
> };
> +
> + vddvario: regulator-vddvario {
> + compatible = "regulator-fixed";
> + regulator-name = "vddvario";
> + regulator-always-on;
> + };
> +
> + vdd33a: regulator-vdd33a {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd33a";
> + regulator-always-on;
> + };
> +};
> +
> +&gpmc {
> + ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
> +
> + ethernet at 5,0 {
> + compatible = "smsc,lan9221", "smsc,lan9115";
> + reg = <5 0 0xff>;
> + bank-width = <2>;
> +
> + gpmc,mux-add-data;
> + gpmc,cs-on-ns = <0>;
> + gpmc,cs-rd-off-ns = <42>;
> + gpmc,cs-wr-off-ns = <36>;
> + gpmc,adv-on-ns = <6>;
> + gpmc,adv-rd-off-ns = <12>;
> + gpmc,adv-wr-off-ns = <12>;
> + gpmc,oe-on-ns = <0>;
> + gpmc,oe-off-ns = <42>;
> + gpmc,we-on-ns = <0>;
> + gpmc,we-off-ns = <36>;
> + gpmc,rd-cycle-ns = <60>;
> + gpmc,wr-cycle-ns = <54>;
> + gpmc,access-ns = <36>;
> + gpmc,page-burst-access-ns = <0>;
> + gpmc,bus-turnaround-ns = <0>;
> + gpmc,cycle2cycle-delay-ns = <0>;
> + gpmc,wr-data-mux-bus-ns = <18>;
> + gpmc,wr-access-ns = <42>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
> +
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176*/
> + reg-io-width = <4>;
> + };
> };
>
> &i2c3 {
>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
next prev parent reply other threads:[~2013-06-11 15:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 14:49 [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-11 14:49 ` Florian Vaussard
2013-06-11 14:49 ` [PATCH 1/4] ARM: dts: OMAP3: Include IRQ header Florian Vaussard
2013-06-11 14:49 ` Florian Vaussard
2013-06-11 14:49 ` [PATCH 2/4] ARM: dts: omap3-tobi: Add SMSC911X node Florian Vaussard
2013-06-11 15:35 ` Javier Martinez Canillas [this message]
2013-06-11 15:35 ` Javier Martinez Canillas
2013-06-11 14:49 ` [PATCH 3/4] ARM: dts: omap3-tobi: Correct polarity for GPIO LED Florian Vaussard
2013-06-11 14:49 ` Florian Vaussard
2013-06-11 14:49 ` [PATCH 4/4] ARM: dts: omap3-overo: Add default trigger for TWL4030 LED Florian Vaussard
2013-06-11 14:49 ` Florian Vaussard
2013-06-19 9:29 ` [PATCH 0/4] ARM: dts: OMAP3: Updates for Overo Florian Vaussard
2013-06-19 9:29 ` Florian Vaussard
2013-06-19 9:34 ` Benoit Cousson
2013-06-19 9:34 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B743B9.3070809@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=florian.vaussard@epfl.ch \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.