From: "Andreas Färber" <andreas.faerber@web.de>
To: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org, Anthony Liguori <aliguori@us.ibm.com>,
qemu-devel@nongnu.org, Brad Smith <brad@comstyle.com>
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH v3] create qemu_openpty_raw() helper function and move it to a separate file
Date: Thu, 13 Jun 2013 19:08:26 +0200 [thread overview]
Message-ID: <51B9FC8A.7000108@web.de> (raw)
In-Reply-To: <1371139489-31940-1-git-send-email-mjt@msgid.tls.msk.ru>
Am 13.06.2013 18:04, schrieb Michael Tokarev:
> In two places qemu uses openpty() which is very system-dependent,
> and in both places the pty is switched to raw mode as well.
> Make a wrapper function which does both steps, and move all the
> system-dependent complexity into a separate file, together
> with static/local implementations of openpty() and cfmakeraw()
> from qemu-char.c.
>
> It is in a separate file, not part of oslib-posix.c, because
> openpty() often resides in -lutil which is not linked to
> every program qemu builds.
>
> This change removes #including of <pty.h>, <termios.h>
> and other rather specific system headers out of qemu-common.h,
> which isn't a place for such specific headers really.
>
> This version has been verified to build correctly on Linux,
> OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
> to be built with gtk gui which were not possible there due to
> missing openpty() and cfmakeraw().
>
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> ---
> Changes since v1:
>
> - added a forgotten #include <termios.h> for *BSD,
> which was recently added into qemu-common.h by
> Brad Smith, and which I intended to use in
> qemu-openpty.c too, but somehow forgot.
>
> Changes since v2:
>
> - verified build on solaris (openindiana) and added
> #include <termios.h> there too,
>
> - removed trailing newline
Tested-by: Andreas Färber <andreas.faerber@web.de>
on OpenIndiana 151a.
Thanks,
Andreas
> This is trivial enough to warrant a -trivial tree.
> The diffstat below is large because of the comments
> in the new file.
>
> include/qemu-common.h | 15 +-----
> qemu-char.c | 77 ++--------------------------
> ui/gtk.c | 12 ++---
> util/Makefile.objs | 2 +-
> util/qemu-openpty.c | 135 +++++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 146 insertions(+), 95 deletions(-)
> create mode 100644 util/qemu-openpty.c
WARNING: multiple messages have this Message-ID (diff)
From: "Andreas Färber" <andreas.faerber@web.de>
To: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org, Anthony Liguori <aliguori@us.ibm.com>,
qemu-devel@nongnu.org, Brad Smith <brad@comstyle.com>
Subject: Re: [Qemu-devel] [PATCH v3] create qemu_openpty_raw() helper function and move it to a separate file
Date: Thu, 13 Jun 2013 19:08:26 +0200 [thread overview]
Message-ID: <51B9FC8A.7000108@web.de> (raw)
In-Reply-To: <1371139489-31940-1-git-send-email-mjt@msgid.tls.msk.ru>
Am 13.06.2013 18:04, schrieb Michael Tokarev:
> In two places qemu uses openpty() which is very system-dependent,
> and in both places the pty is switched to raw mode as well.
> Make a wrapper function which does both steps, and move all the
> system-dependent complexity into a separate file, together
> with static/local implementations of openpty() and cfmakeraw()
> from qemu-char.c.
>
> It is in a separate file, not part of oslib-posix.c, because
> openpty() often resides in -lutil which is not linked to
> every program qemu builds.
>
> This change removes #including of <pty.h>, <termios.h>
> and other rather specific system headers out of qemu-common.h,
> which isn't a place for such specific headers really.
>
> This version has been verified to build correctly on Linux,
> OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
> to be built with gtk gui which were not possible there due to
> missing openpty() and cfmakeraw().
>
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> ---
> Changes since v1:
>
> - added a forgotten #include <termios.h> for *BSD,
> which was recently added into qemu-common.h by
> Brad Smith, and which I intended to use in
> qemu-openpty.c too, but somehow forgot.
>
> Changes since v2:
>
> - verified build on solaris (openindiana) and added
> #include <termios.h> there too,
>
> - removed trailing newline
Tested-by: Andreas Färber <andreas.faerber@web.de>
on OpenIndiana 151a.
Thanks,
Andreas
> This is trivial enough to warrant a -trivial tree.
> The diffstat below is large because of the comments
> in the new file.
>
> include/qemu-common.h | 15 +-----
> qemu-char.c | 77 ++--------------------------
> ui/gtk.c | 12 ++---
> util/Makefile.objs | 2 +-
> util/qemu-openpty.c | 135 +++++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 146 insertions(+), 95 deletions(-)
> create mode 100644 util/qemu-openpty.c
next prev parent reply other threads:[~2013-06-13 21:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-13 16:04 [Qemu-trivial] [PATCH v3] create qemu_openpty_raw() helper function and move it to a separate file Michael Tokarev
2013-06-13 16:04 ` [Qemu-devel] " Michael Tokarev
2013-06-13 17:08 ` Andreas Färber [this message]
2013-06-13 17:08 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B9FC8A.7000108@web.de \
--to=andreas.faerber@web.de \
--cc=aliguori@us.ibm.com \
--cc=brad@comstyle.com \
--cc=mjt@tls.msk.ru \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.