From: John Stultz <john.stultz@linaro.org>
To: Alexander Holler <holler@ahsoftware.de>
Cc: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
rtc-linux@googlegroups.com, Thomas Gleixner <tglx@linutronix.de>,
Alessandro Zummo <a.zummo@towertech.it>
Subject: Re: [PATCH 5/9 v3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys
Date: Fri, 14 Jun 2013 12:24:09 -0700 [thread overview]
Message-ID: <51BB6DD9.6010200@linaro.org> (raw)
In-Reply-To: <1371228732-5749-6-git-send-email-holler@ahsoftware.de>
On 06/14/2013 09:52 AM, Alexander Holler wrote:
> hctosys= specifies the driver (RTC) name which sets the system clock at
> boot, if and only if userspace hasn't set the time before the driver will
> be loaded.
>
> If hctosys will not be specified, the first available hardware clock
> with a valid time will be used (again, if and only if ...).
>
> If you don't want that the system clock will be set by any hardware clock,
> just specify a non-existent RTC driver name, e.g. with hctosys=none.
So what was the rational for this to be a boot time argument instead of
using the existing compile time CONFIG_RTC_HCTOSYS_DEVICE?
If we need a boot argument, that's still doable, but it probably should
fall back to CONFIG_RTC_HCTOSYS_DEVICE if not specified.
thanks
-john
next prev parent reply other threads:[~2013-06-14 19:24 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 15:14 [PATCH 0/3] rtc: rtc-hid-sensor-time Alexander Holler
2013-04-19 15:14 ` [PATCH 1/3 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-04-19 15:14 ` [PATCH 2/3] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-04-19 15:14 ` [PATCH 3/3] rtc: rtc-hid-sensor-time; add option hctosys to set time at boot Alexander Holler
2013-04-22 23:38 ` Andrew Morton
2013-04-23 8:51 ` Alexander Holler
2013-04-23 10:08 ` Alexander Holler
2013-04-23 10:13 ` Alexander Holler
2013-04-23 10:17 ` Alexander Holler
2013-04-23 15:47 ` Alexander Holler
2013-04-24 21:14 ` Andrew Morton
2013-04-25 6:55 ` Alexander Holler
2013-05-05 11:21 ` [PATCH 0/4] rtc: rtc-hid-sensor-time: some changes Alexander Holler
2013-05-05 11:21 ` [PATCH 1/4] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-05-05 11:21 ` [PATCH 2/4] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-05-05 11:21 ` [PATCH 3/4] rtc: rtc-hid-sensor-time: add option hctosys to set time at boot Alexander Holler
2013-05-21 21:42 ` Andrew Morton
2013-05-21 22:02 ` John Stultz
2013-05-21 23:15 ` Alexander Holler
2013-05-28 19:37 ` John Stultz
2013-05-29 4:42 ` Alexander Holler
2013-06-04 13:41 ` Alexander Holler
2013-06-05 17:15 ` [PATCH 0/3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-05 17:15 ` [PATCH 1/3] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-05 17:15 ` [PATCH 2/3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-05 17:15 ` [PATCH 3/3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-06 10:51 ` [PATCH 0/3 v2] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-06 10:51 ` [PATCH 1/3 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-06 10:51 ` [PATCH 2/3 v2] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-13 19:39 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism Alexander Holler
2013-06-14 16:52 ` [PATCH 1/9 RESEND] rtc: rtc-hid-sensor-time: allow full years (16bit) in HID reports Alexander Holler
2013-06-14 16:52 ` [PATCH 2/9 RESEND] rtc: rtc-hid-sensor-time: allow 16 and 32 bit values for all attributes Alexander Holler
2013-06-14 16:52 ` [PATCH 3/9] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-20 10:39 ` [PATCH 3/9 v2] " Alexander Holler
2013-06-26 19:55 ` Andrew Morton
2013-06-26 21:34 ` [rtc-linux] " Alexander Holler
2013-06-26 22:07 ` Greg KH
2013-06-26 23:51 ` Alexander Holler
2013-07-06 8:55 ` Alexander Holler
2013-07-06 18:21 ` Jiri Kosina
2013-07-07 7:35 ` Alexander Holler
2013-07-08 9:12 ` [PATCH 0/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-07-08 9:12 ` [PATCH 1/2] rtc: rtc-hid-sensor-time: improve error handling when rtc register fails Alexander Holler
2013-07-08 9:12 ` [PATCH 2/2] rtc: rtc-hid-sensor-time: enable HID input processing early Alexander Holler
2013-06-28 1:29 ` [rtc-linux] Re: [PATCH 3/9 v2] rtc: rtc-hid-sensor-time: delay registering as rtc into a work Alexander Holler
2013-06-14 16:52 ` [PATCH 4/9 RESEND] RFC: timekeeping: introduce flag systime_was_set Alexander Holler
2013-06-14 17:41 ` John Stultz
2013-06-14 18:05 ` [rtc-linux] " Alexander Holler
2013-06-14 18:28 ` John Stultz
2013-06-15 6:01 ` Alexander Holler
2013-06-17 18:10 ` John Stultz
2013-06-20 10:15 ` Alexander Holler
2013-06-20 17:27 ` John Stultz
2013-06-20 18:45 ` Alexander Holler
2013-06-20 19:28 ` John Stultz
2013-06-20 23:10 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 5/9 v3] RFC: timekeeping: rtc: Introduce new kernel parameter hctosys Alexander Holler
2013-06-14 19:24 ` John Stultz [this message]
2013-06-14 16:52 ` [PATCH 6/9 v3] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-14 19:11 ` John Stultz
2013-06-22 8:00 ` Alexander Holler
2013-06-14 16:52 ` [PATCH 7/9] RFC: rtc: implement rtc_read_timeval() Alexander Holler
2013-06-14 17:23 ` John Stultz
2013-06-14 17:43 ` Alexander Holler
2013-06-14 19:18 ` John Stultz
2013-06-14 17:28 ` John Stultz
2013-06-14 16:52 ` [PATCH 8/9] RFC: rtc: hctosys: support rtc_read_timeval() for high precision clocks Alexander Holler
2013-06-14 19:20 ` John Stultz
2013-06-14 16:52 ` [PATCH 9/9] RFC: rtc: rtc-hid-sensor-time: add support for rtc_read_timeval() Alexander Holler
2013-06-14 17:27 ` [PATCH 0/9 v3] RFC: timekeeping: rtc: change hctosys mechanism John Stultz
2013-06-06 10:51 ` [PATCH 3/3 v2] RFC: timekeeping: rtc: remove CONFIG_RTC_HCTOSYS and RTC_HCTOSYS_DEVICE Alexander Holler
2013-06-04 9:38 ` [PATCH] rtc: rtc-hid-sensor-time: fix possible bug on driver_remove Alexander Holler
2013-06-08 8:56 ` Alexander Holler
2013-05-05 11:21 ` [PATCH 4/4] rtc: rtc-hid-sensor-time: add support for milliseconds Alexander Holler
2013-04-20 23:46 ` [PATCH 0/3] rtc: rtc-hid-sensor-time Jiri Kosina
2013-04-21 6:38 ` Alexander Holler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51BB6DD9.6010200@linaro.org \
--to=john.stultz@linaro.org \
--cc=a.zummo@towertech.it \
--cc=akpm@linux-foundation.org \
--cc=holler@ahsoftware.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.