* [PATCH v3 0/2] dmaengine: at_hdmac: dt dma bindings update @ 2013-06-13 8:39 ` ludovic.desroches 0 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches at atmel.com @ 2013-06-13 8:39 UTC (permalink / raw) To: linux-arm-kernel From: Ludovic Desroches <ludovic.desroches@atmel.com> Vinod, This version removes the extra tab in patch 2/2 and add Arnd's ack. Thanks Regards Ludovic This set of patches update the dt dma binding for at_hdmac since we need one more parameter. In order to keep backward compatibility, an existing cell will be used to add this parameter. Since the content of that cell will become a magic value due to the concatenation of the two parameters, it is time to use macros. v3: - remove extra tab in patch 2/2 v2: - rebased on slave-dma/next Ludovic Desroches (2): ARM: at91: dt: add header to define at_hdmac configuration at_hdmac: add FIFO configuration parameter to DMA DT binding .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++-- drivers/dma/at_hdmac.c | 25 ++++++++++++++++---- include/dt-bindings/dma/at91.h | 27 ++++++++++++++++++++++ 3 files changed, 53 insertions(+), 6 deletions(-) create mode 100644 include/dt-bindings/dma/at91.h -- 1.7.11.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 0/2] dmaengine: at_hdmac: dt dma bindings update @ 2013-06-13 8:39 ` ludovic.desroches 0 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches @ 2013-06-13 8:39 UTC (permalink / raw) To: vinod.koul, arnd, olof, linux-arm-kernel, linux-kernel Cc: nicolas.ferre, plagnioj, Ludovic Desroches From: Ludovic Desroches <ludovic.desroches@atmel.com> Vinod, This version removes the extra tab in patch 2/2 and add Arnd's ack. Thanks Regards Ludovic This set of patches update the dt dma binding for at_hdmac since we need one more parameter. In order to keep backward compatibility, an existing cell will be used to add this parameter. Since the content of that cell will become a magic value due to the concatenation of the two parameters, it is time to use macros. v3: - remove extra tab in patch 2/2 v2: - rebased on slave-dma/next Ludovic Desroches (2): ARM: at91: dt: add header to define at_hdmac configuration at_hdmac: add FIFO configuration parameter to DMA DT binding .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++-- drivers/dma/at_hdmac.c | 25 ++++++++++++++++---- include/dt-bindings/dma/at91.h | 27 ++++++++++++++++++++++ 3 files changed, 53 insertions(+), 6 deletions(-) create mode 100644 include/dt-bindings/dma/at91.h -- 1.7.11.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 1/2] ARM: at91: dt: add header to define at_hdmac configuration 2013-06-13 8:39 ` ludovic.desroches @ 2013-06-13 8:39 ` ludovic.desroches -1 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches at atmel.com @ 2013-06-13 8:39 UTC (permalink / raw) To: linux-arm-kernel From: Ludovic Desroches <ludovic.desroches@atmel.com> DMA-cell content is a concatenation of several values. In order to keep this stuff human readable, macros are introduced. The values for the FIFO configuration are not the same as the ones used in the configuration register in order to keep backward compatibility. Most devices use the half FIFO configuration but USART ones have to use the ASAP configuration. This parameter was not initially planed to be into the at91 dma dt binding. The third cell will be used to store this parameter, it will become a concatenation of the FIFO configuration and of the peripheral ID. In order to keep backward compatibility i.e. FIFO configuration is equal to 0, we have to perform a translation since the value to put in the register to set half FIFO is 1. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- include/dt-bindings/dma/at91.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 include/dt-bindings/dma/at91.h diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h new file mode 100644 index 0000000..e835037 --- /dev/null +++ b/include/dt-bindings/dma/at91.h @@ -0,0 +1,27 @@ +/* + * This header provides macros for at91 dma bindings. + * + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_DMA_H__ +#define __DT_BINDINGS_AT91_DMA_H__ + +/* + * Source and/or destination peripheral ID + */ +#define AT91_DMA_CFG_PER_ID_MASK (0xff) +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) + +/* + * FIFO configuration: it defines when a request is serviced. + */ +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ + +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ -- 1.7.11.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 1/2] ARM: at91: dt: add header to define at_hdmac configuration @ 2013-06-13 8:39 ` ludovic.desroches 0 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches @ 2013-06-13 8:39 UTC (permalink / raw) To: vinod.koul, arnd, olof, linux-arm-kernel, linux-kernel Cc: nicolas.ferre, plagnioj, Ludovic Desroches From: Ludovic Desroches <ludovic.desroches@atmel.com> DMA-cell content is a concatenation of several values. In order to keep this stuff human readable, macros are introduced. The values for the FIFO configuration are not the same as the ones used in the configuration register in order to keep backward compatibility. Most devices use the half FIFO configuration but USART ones have to use the ASAP configuration. This parameter was not initially planed to be into the at91 dma dt binding. The third cell will be used to store this parameter, it will become a concatenation of the FIFO configuration and of the peripheral ID. In order to keep backward compatibility i.e. FIFO configuration is equal to 0, we have to perform a translation since the value to put in the register to set half FIFO is 1. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- include/dt-bindings/dma/at91.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 include/dt-bindings/dma/at91.h diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h new file mode 100644 index 0000000..e835037 --- /dev/null +++ b/include/dt-bindings/dma/at91.h @@ -0,0 +1,27 @@ +/* + * This header provides macros for at91 dma bindings. + * + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_DMA_H__ +#define __DT_BINDINGS_AT91_DMA_H__ + +/* + * Source and/or destination peripheral ID + */ +#define AT91_DMA_CFG_PER_ID_MASK (0xff) +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) + +/* + * FIFO configuration: it defines when a request is serviced. + */ +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ + +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ -- 1.7.11.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 1/2] ARM: at91: dt: add header to define at_hdmac configuration 2013-06-13 8:39 ` ludovic.desroches @ 2013-06-14 22:11 ` Nicolas Ferre -1 siblings, 0 replies; 8+ messages in thread From: Nicolas Ferre @ 2013-06-14 22:11 UTC (permalink / raw) To: linux-arm-kernel On 13/06/2013 10:39, ludovic.desroches at atmel.com : > From: Ludovic Desroches <ludovic.desroches@atmel.com> > > DMA-cell content is a concatenation of several values. In order to keep this > stuff human readable, macros are introduced. > > The values for the FIFO configuration are not the same as the ones used in the > configuration register in order to keep backward compatibility. Most devices > use the half FIFO configuration but USART ones have to use the ASAP > configuration. This parameter was not initially planed to be into the at91 dma > dt binding. The third cell will be used to store this parameter, it will > become a concatenation of the FIFO configuration and of the peripheral ID. In > order to keep backward compatibility i.e. FIFO configuration is equal to 0, we > have to perform a translation since the value to put in the register to set > half FIFO is 1. > > Acked-by: Arnd Bergmann <arnd@arndb.de> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Of course: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> In addition to going through slave-dma Vinod's git tree, I also stack it on the AT91 DT branch so that it can go in arm-soc and prevent a dependency between the two trees that could lead to a build error... Best regards, > --- > include/dt-bindings/dma/at91.h | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 include/dt-bindings/dma/at91.h > > diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h > new file mode 100644 > index 0000000..e835037 > --- /dev/null > +++ b/include/dt-bindings/dma/at91.h > @@ -0,0 +1,27 @@ > +/* > + * This header provides macros for at91 dma bindings. > + * > + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> > + * > + * GPLv2 only > + */ > + > +#ifndef __DT_BINDINGS_AT91_DMA_H__ > +#define __DT_BINDINGS_AT91_DMA_H__ > + > +/* > + * Source and/or destination peripheral ID > + */ > +#define AT91_DMA_CFG_PER_ID_MASK (0xff) > +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) > + > +/* > + * FIFO configuration: it defines when a request is serviced. > + */ > +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) > +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) > +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ > +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ > +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ > + > +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 1/2] ARM: at91: dt: add header to define at_hdmac configuration @ 2013-06-14 22:11 ` Nicolas Ferre 0 siblings, 0 replies; 8+ messages in thread From: Nicolas Ferre @ 2013-06-14 22:11 UTC (permalink / raw) To: ludovic.desroches, vinod.koul, arnd, olof Cc: linux-arm-kernel, linux-kernel, plagnioj On 13/06/2013 10:39, ludovic.desroches@atmel.com : > From: Ludovic Desroches <ludovic.desroches@atmel.com> > > DMA-cell content is a concatenation of several values. In order to keep this > stuff human readable, macros are introduced. > > The values for the FIFO configuration are not the same as the ones used in the > configuration register in order to keep backward compatibility. Most devices > use the half FIFO configuration but USART ones have to use the ASAP > configuration. This parameter was not initially planed to be into the at91 dma > dt binding. The third cell will be used to store this parameter, it will > become a concatenation of the FIFO configuration and of the peripheral ID. In > order to keep backward compatibility i.e. FIFO configuration is equal to 0, we > have to perform a translation since the value to put in the register to set > half FIFO is 1. > > Acked-by: Arnd Bergmann <arnd@arndb.de> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Of course: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> In addition to going through slave-dma Vinod's git tree, I also stack it on the AT91 DT branch so that it can go in arm-soc and prevent a dependency between the two trees that could lead to a build error... Best regards, > --- > include/dt-bindings/dma/at91.h | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 include/dt-bindings/dma/at91.h > > diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h > new file mode 100644 > index 0000000..e835037 > --- /dev/null > +++ b/include/dt-bindings/dma/at91.h > @@ -0,0 +1,27 @@ > +/* > + * This header provides macros for at91 dma bindings. > + * > + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> > + * > + * GPLv2 only > + */ > + > +#ifndef __DT_BINDINGS_AT91_DMA_H__ > +#define __DT_BINDINGS_AT91_DMA_H__ > + > +/* > + * Source and/or destination peripheral ID > + */ > +#define AT91_DMA_CFG_PER_ID_MASK (0xff) > +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) > + > +/* > + * FIFO configuration: it defines when a request is serviced. > + */ > +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) > +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) > +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ > +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ > +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ > + > +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 2/2] at_hdmac: add FIFO configuration parameter to DMA DT binding 2013-06-13 8:39 ` ludovic.desroches @ 2013-06-13 8:39 ` ludovic.desroches -1 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches at atmel.com @ 2013-06-13 8:39 UTC (permalink / raw) To: linux-arm-kernel From: Ludovic Desroches <ludovic.desroches@atmel.com> For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++-- drivers/dma/at_hdmac.c | 25 ++++++++++++++++++---- 2 files changed, 26 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index c80e8a3..c280a0e 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -24,8 +24,11 @@ The three cells in order are: 1. A phandle pointing to the DMA controller. 2. The memory interface (16 most significant bits), the peripheral interface (16 less significant bits). -3. The peripheral identifier for the hardware handshaking interface. The -identifier can be different for tx and rx. +3. Parameters for the at91 DMA configuration register which are device +dependant: + - bit 7-0: peripheral identifier for the hardware handshaking interface. The + identifier can be different for tx and rx. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. Example: diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6db5228..b7050a4 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -14,6 +14,7 @@ * found on AT91SAM9263. */ +#include <dt-bindings/dma/at91.h> #include <linux/clk.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> @@ -1320,15 +1321,31 @@ static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec, atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL); if (!atslave) return NULL; + + atslave->cfg = ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW; /* * We can fill both SRC_PER and DST_PER, one of these fields will be * ignored depending on DMA transfer direction. */ - per_id = dma_spec->args[1]; - atslave->cfg = ATC_FIFOCFG_HALFFIFO - | ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW - | ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id) + per_id = dma_spec->args[1] & AT91_DMA_CFG_PER_ID_MASK; + atslave->cfg |= ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id) | ATC_SRC_PER_MSB(per_id) | ATC_SRC_PER(per_id); + /* + * We have to translate the value we get from the device tree since + * the half FIFO configuration value had to be 0 to keep backward + * compatibility. + */ + switch (dma_spec->args[1] & AT91_DMA_CFG_FIFOCFG_MASK) { + case AT91_DMA_CFG_FIFOCFG_ALAP: + atslave->cfg |= ATC_FIFOCFG_LARGESTBURST; + break; + case AT91_DMA_CFG_FIFOCFG_ASAP: + atslave->cfg |= ATC_FIFOCFG_ENOUGHSPACE; + break; + case AT91_DMA_CFG_FIFOCFG_HALF: + default: + atslave->cfg |= ATC_FIFOCFG_HALFFIFO; + } atslave->dma_dev = &dmac_pdev->dev; chan = dma_request_channel(mask, at_dma_filter, atslave); -- 1.7.11.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 2/2] at_hdmac: add FIFO configuration parameter to DMA DT binding @ 2013-06-13 8:39 ` ludovic.desroches 0 siblings, 0 replies; 8+ messages in thread From: ludovic.desroches @ 2013-06-13 8:39 UTC (permalink / raw) To: vinod.koul, arnd, olof, linux-arm-kernel, linux-kernel Cc: nicolas.ferre, plagnioj, Ludovic Desroches From: Ludovic Desroches <ludovic.desroches@atmel.com> For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++-- drivers/dma/at_hdmac.c | 25 ++++++++++++++++++---- 2 files changed, 26 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index c80e8a3..c280a0e 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -24,8 +24,11 @@ The three cells in order are: 1. A phandle pointing to the DMA controller. 2. The memory interface (16 most significant bits), the peripheral interface (16 less significant bits). -3. The peripheral identifier for the hardware handshaking interface. The -identifier can be different for tx and rx. +3. Parameters for the at91 DMA configuration register which are device +dependant: + - bit 7-0: peripheral identifier for the hardware handshaking interface. The + identifier can be different for tx and rx. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. Example: diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6db5228..b7050a4 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -14,6 +14,7 @@ * found on AT91SAM9263. */ +#include <dt-bindings/dma/at91.h> #include <linux/clk.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> @@ -1320,15 +1321,31 @@ static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec, atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL); if (!atslave) return NULL; + + atslave->cfg = ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW; /* * We can fill both SRC_PER and DST_PER, one of these fields will be * ignored depending on DMA transfer direction. */ - per_id = dma_spec->args[1]; - atslave->cfg = ATC_FIFOCFG_HALFFIFO - | ATC_DST_H2SEL_HW | ATC_SRC_H2SEL_HW - | ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id) + per_id = dma_spec->args[1] & AT91_DMA_CFG_PER_ID_MASK; + atslave->cfg |= ATC_DST_PER_MSB(per_id) | ATC_DST_PER(per_id) | ATC_SRC_PER_MSB(per_id) | ATC_SRC_PER(per_id); + /* + * We have to translate the value we get from the device tree since + * the half FIFO configuration value had to be 0 to keep backward + * compatibility. + */ + switch (dma_spec->args[1] & AT91_DMA_CFG_FIFOCFG_MASK) { + case AT91_DMA_CFG_FIFOCFG_ALAP: + atslave->cfg |= ATC_FIFOCFG_LARGESTBURST; + break; + case AT91_DMA_CFG_FIFOCFG_ASAP: + atslave->cfg |= ATC_FIFOCFG_ENOUGHSPACE; + break; + case AT91_DMA_CFG_FIFOCFG_HALF: + default: + atslave->cfg |= ATC_FIFOCFG_HALFFIFO; + } atslave->dma_dev = &dmac_pdev->dev; chan = dma_request_channel(mask, at_dma_filter, atslave); -- 1.7.11.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-06-14 22:12 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-06-13 8:39 [PATCH v3 0/2] dmaengine: at_hdmac: dt dma bindings update ludovic.desroches at atmel.com 2013-06-13 8:39 ` ludovic.desroches 2013-06-13 8:39 ` [PATCH v3 1/2] ARM: at91: dt: add header to define at_hdmac configuration ludovic.desroches at atmel.com 2013-06-13 8:39 ` ludovic.desroches 2013-06-14 22:11 ` Nicolas Ferre 2013-06-14 22:11 ` Nicolas Ferre 2013-06-13 8:39 ` [PATCH v3 2/2] at_hdmac: add FIFO configuration parameter to DMA DT binding ludovic.desroches at atmel.com 2013-06-13 8:39 ` ludovic.desroches
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.