* [PATCH 0/3] ARM: S3C24XX: s3c2416 build fixes @ 2013-06-13 22:44 ` Heiko Stübner 0 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:44 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij While testing Tomasz' timer series I came accross some small build problems in the new code for pinctrl and dt support on s3c24xx. All 3 patches fix problems in the samsung tree, so should also go thru there. Heiko Stuebner (3): gpio: samsung: add PINCTRL_S3C24XX to exclude options pinctrl: s3c24xx: use correct header for chained_irq functions ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- drivers/gpio/gpio-samsung.c | 3 ++- drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- 3 files changed, 7 insertions(+), 7 deletions(-) -- 1.7.10.4 ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 0/3] ARM: S3C24XX: s3c2416 build fixes @ 2013-06-13 22:44 ` Heiko Stübner 0 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:44 UTC (permalink / raw) To: linux-arm-kernel While testing Tomasz' timer series I came accross some small build problems in the new code for pinctrl and dt support on s3c24xx. All 3 patches fix problems in the samsung tree, so should also go thru there. Heiko Stuebner (3): gpio: samsung: add PINCTRL_S3C24XX to exclude options pinctrl: s3c24xx: use correct header for chained_irq functions ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- drivers/gpio/gpio-samsung.c | 3 ++- drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- 3 files changed, 7 insertions(+), 7 deletions(-) -- 1.7.10.4 ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-13 22:44 ` Heiko Stübner @ 2013-06-13 22:45 ` Heiko Stübner -1 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:45 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij When a pinctrl driver is loaded legacy gpio support has to be disabled. The code checking for the pinctrl presence is contained in an #ifdef checking for the presence of a valid samsung pinctrl driver. There the new PINCTRL_S3C24XX was missing resulting in the check never being run and the gpio being enabled breaking the pinctrl driver. Fix this by adding the missing CONFIG_PINCTRL_S3C24XX Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/gpio/gpio-samsung.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index a1392f4..c84503e 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || \ + defined(CONFIG_PINCTRL_S3C24XX) /* * This gpio driver includes support for device tree support and there * are platforms using it. In order to maintain compatibility with those -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-13 22:45 ` Heiko Stübner 0 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:45 UTC (permalink / raw) To: linux-arm-kernel When a pinctrl driver is loaded legacy gpio support has to be disabled. The code checking for the pinctrl presence is contained in an #ifdef checking for the presence of a valid samsung pinctrl driver. There the new PINCTRL_S3C24XX was missing resulting in the check never being run and the gpio being enabled breaking the pinctrl driver. Fix this by adding the missing CONFIG_PINCTRL_S3C24XX Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/gpio/gpio-samsung.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index a1392f4..c84503e 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || \ + defined(CONFIG_PINCTRL_S3C24XX) /* * This gpio driver includes support for device tree support and there * are platforms using it. In order to maintain compatibility with those -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* RE: [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-13 22:45 ` Heiko Stübner @ 2013-06-17 13:13 ` Kukjin Kim -1 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 13:13 UTC (permalink / raw) To: 'Heiko Stübner' Cc: linux-arm-kernel, linux-samsung-soc, 'Grant Likely', linus.walleij Heiko Stübner wrote: > > When a pinctrl driver is loaded legacy gpio support has to be disabled. > The code checking for the pinctrl presence is contained in an #ifdef > checking for the presence of a valid samsung pinctrl driver. > > There the new PINCTRL_S3C24XX was missing resulting in the check never > being run and the gpio being enabled breaking the pinctrl driver. > > Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/gpio/gpio-samsung.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index a1392f4..c84503e 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > int i, nr_chips; > int group = 0; > > -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > || \ > + defined(CONFIG_PINCTRL_S3C24XX) > /* > * This gpio driver includes support for device tree support and > there > * are platforms using it. In order to maintain compatibility with > those > -- > 1.7.10.4 Yeah, this is needed :-) Linus, shall I take this into samsung tree? Or since the pinctrl-s3c24xx already merged into arm-soc, this could be picked into your tree... Thanks, - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-17 13:13 ` Kukjin Kim 0 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 13:13 UTC (permalink / raw) To: linux-arm-kernel Heiko St?bner wrote: > > When a pinctrl driver is loaded legacy gpio support has to be disabled. > The code checking for the pinctrl presence is contained in an #ifdef > checking for the presence of a valid samsung pinctrl driver. > > There the new PINCTRL_S3C24XX was missing resulting in the check never > being run and the gpio being enabled breaking the pinctrl driver. > > Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/gpio/gpio-samsung.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index a1392f4..c84503e 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > int i, nr_chips; > int group = 0; > > -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > || \ > + defined(CONFIG_PINCTRL_S3C24XX) > /* > * This gpio driver includes support for device tree support and > there > * are platforms using it. In order to maintain compatibility with > those > -- > 1.7.10.4 Yeah, this is needed :-) Linus, shall I take this into samsung tree? Or since the pinctrl-s3c24xx already merged into arm-soc, this could be picked into your tree... Thanks, - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-17 13:13 ` Kukjin Kim @ 2013-06-17 16:49 ` Linus Walleij -1 siblings, 0 replies; 26+ messages in thread From: Linus Walleij @ 2013-06-17 16:49 UTC (permalink / raw) To: Kukjin Kim Cc: Heiko Stübner, linux-arm-kernel@lists.infradead.org, linux-samsung-soc, Grant Likely On Mon, Jun 17, 2013 at 3:13 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > Linus, shall I take this into samsung tree? Or since the pinctrl-s3c24xx already merged into arm-soc, this could be picked into your tree... I'm not rebasing pinctrl agains the ARM SoC tree, I only rebase to Torvalds tree. So please take it through the Samsung tree... Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-17 16:49 ` Linus Walleij 0 siblings, 0 replies; 26+ messages in thread From: Linus Walleij @ 2013-06-17 16:49 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jun 17, 2013 at 3:13 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > Linus, shall I take this into samsung tree? Or since the pinctrl-s3c24xx already merged into arm-soc, this could be picked into your tree... I'm not rebasing pinctrl agains the ARM SoC tree, I only rebase to Torvalds tree. So please take it through the Samsung tree... Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-13 22:45 ` Heiko Stübner @ 2013-06-17 13:19 ` Tomasz Figa -1 siblings, 0 replies; 26+ messages in thread From: Tomasz Figa @ 2013-06-17 13:19 UTC (permalink / raw) To: Heiko Stübner Cc: Kukjin Kim, linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij Hi Heiko, On Friday 14 of June 2013 00:45:27 Heiko Stübner wrote: > When a pinctrl driver is loaded legacy gpio support has to be disabled. > The code checking for the pinctrl presence is contained in an #ifdef > checking for the presence of a valid samsung pinctrl driver. > > There the new PINCTRL_S3C24XX was missing resulting in the check never > being run and the gpio being enabled breaking the pinctrl driver. > > Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/gpio/gpio-samsung.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index a1392f4..c84503e 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > int i, nr_chips; > int group = 0; > > -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || > \ + defined(CONFIG_PINCTRL_S3C24XX) I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except PINCTRL_EXYNOS5440 which doesn't use the common part). Best regards, Tomasz > /* > * This gpio driver includes support for device tree support and there > * are platforms using it. In order to maintain compatibility with those ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-17 13:19 ` Tomasz Figa 0 siblings, 0 replies; 26+ messages in thread From: Tomasz Figa @ 2013-06-17 13:19 UTC (permalink / raw) To: linux-arm-kernel Hi Heiko, On Friday 14 of June 2013 00:45:27 Heiko St?bner wrote: > When a pinctrl driver is loaded legacy gpio support has to be disabled. > The code checking for the pinctrl presence is contained in an #ifdef > checking for the presence of a valid samsung pinctrl driver. > > There the new PINCTRL_S3C24XX was missing resulting in the check never > being run and the gpio being enabled breaking the pinctrl driver. > > Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/gpio/gpio-samsung.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index a1392f4..c84503e 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > int i, nr_chips; > int group = 0; > > -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || > \ + defined(CONFIG_PINCTRL_S3C24XX) I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except PINCTRL_EXYNOS5440 which doesn't use the common part). Best regards, Tomasz > /* > * This gpio driver includes support for device tree support and there > * are platforms using it. In order to maintain compatibility with those ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-17 13:19 ` Tomasz Figa @ 2013-06-17 15:43 ` Kukjin Kim -1 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 15:43 UTC (permalink / raw) To: Tomasz Figa Cc: Heiko Stübner, Kukjin Kim, linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij On 06/17/13 22:19, Tomasz Figa wrote: > Hi Heiko, > > On Friday 14 of June 2013 00:45:27 Heiko Stübner wrote: >> When a pinctrl driver is loaded legacy gpio support has to be disabled. >> The code checking for the pinctrl presence is contained in an #ifdef >> checking for the presence of a valid samsung pinctrl driver. >> >> There the new PINCTRL_S3C24XX was missing resulting in the check never >> being run and the gpio being enabled breaking the pinctrl driver. >> >> Fix this by adding the missing CONFIG_PINCTRL_S3C24XX >> >> Signed-off-by: Heiko Stuebner<heiko@sntech.de> >> --- >> drivers/gpio/gpio-samsung.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c >> index a1392f4..c84503e 100644 >> --- a/drivers/gpio/gpio-samsung.c >> +++ b/drivers/gpio/gpio-samsung.c >> @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) >> int i, nr_chips; >> int group = 0; >> >> -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) >> +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || >> \ + defined(CONFIG_PINCTRL_S3C24XX) > > I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except > PINCTRL_EXYNOS5440 which doesn't use the common part). > Well, not added compatible for 's3c64xx-pinctrl' yet? - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-17 15:43 ` Kukjin Kim 0 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 15:43 UTC (permalink / raw) To: linux-arm-kernel On 06/17/13 22:19, Tomasz Figa wrote: > Hi Heiko, > > On Friday 14 of June 2013 00:45:27 Heiko St?bner wrote: >> When a pinctrl driver is loaded legacy gpio support has to be disabled. >> The code checking for the pinctrl presence is contained in an #ifdef >> checking for the presence of a valid samsung pinctrl driver. >> >> There the new PINCTRL_S3C24XX was missing resulting in the check never >> being run and the gpio being enabled breaking the pinctrl driver. >> >> Fix this by adding the missing CONFIG_PINCTRL_S3C24XX >> >> Signed-off-by: Heiko Stuebner<heiko@sntech.de> >> --- >> drivers/gpio/gpio-samsung.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c >> index a1392f4..c84503e 100644 >> --- a/drivers/gpio/gpio-samsung.c >> +++ b/drivers/gpio/gpio-samsung.c >> @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) >> int i, nr_chips; >> int group = 0; >> >> -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) >> +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) || >> \ + defined(CONFIG_PINCTRL_S3C24XX) > > I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except > PINCTRL_EXYNOS5440 which doesn't use the common part). > Well, not added compatible for 's3c64xx-pinctrl' yet? - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options 2013-06-17 15:43 ` Kukjin Kim @ 2013-06-17 15:48 ` Tomasz Figa -1 siblings, 0 replies; 26+ messages in thread From: Tomasz Figa @ 2013-06-17 15:48 UTC (permalink / raw) To: Kukjin Kim Cc: Heiko Stübner, linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij On Tuesday 18 of June 2013 00:43:41 Kukjin Kim wrote: > On 06/17/13 22:19, Tomasz Figa wrote: > > Hi Heiko, > > > > On Friday 14 of June 2013 00:45:27 Heiko Stübner wrote: > >> When a pinctrl driver is loaded legacy gpio support has to be disabled. > >> The code checking for the pinctrl presence is contained in an #ifdef > >> checking for the presence of a valid samsung pinctrl driver. > >> > >> There the new PINCTRL_S3C24XX was missing resulting in the check never > >> being run and the gpio being enabled breaking the pinctrl driver. > >> > >> Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > >> > >> Signed-off-by: Heiko Stuebner<heiko@sntech.de> > >> --- > >> > >> drivers/gpio/gpio-samsung.c | 3 ++- > >> 1 file changed, 2 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > >> index a1392f4..c84503e 100644 > >> --- a/drivers/gpio/gpio-samsung.c > >> +++ b/drivers/gpio/gpio-samsung.c > >> @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > >> > >> int i, nr_chips; > >> int group = 0; > >> > >> -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > >> +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > >> || \ + defined(CONFIG_PINCTRL_S3C24XX) > > > > I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except > > PINCTRL_EXYNOS5440 which doesn't use the common part). > > Well, not added compatible for 's3c64xx-pinctrl' yet? Right, but this shouldn't have any effect on this code. PINCTRL_S3C64XX isn't selected by anything yet, so PINCTRL_SAMSUNG won't be selected when ARCH_S3C64XX is used. As for s3c64xx DT support, I'm planning to finally post patches this week. Best regards, Tomasz > - Kukjin > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options @ 2013-06-17 15:48 ` Tomasz Figa 0 siblings, 0 replies; 26+ messages in thread From: Tomasz Figa @ 2013-06-17 15:48 UTC (permalink / raw) To: linux-arm-kernel On Tuesday 18 of June 2013 00:43:41 Kukjin Kim wrote: > On 06/17/13 22:19, Tomasz Figa wrote: > > Hi Heiko, > > > > On Friday 14 of June 2013 00:45:27 Heiko St?bner wrote: > >> When a pinctrl driver is loaded legacy gpio support has to be disabled. > >> The code checking for the pinctrl presence is contained in an #ifdef > >> checking for the presence of a valid samsung pinctrl driver. > >> > >> There the new PINCTRL_S3C24XX was missing resulting in the check never > >> being run and the gpio being enabled breaking the pinctrl driver. > >> > >> Fix this by adding the missing CONFIG_PINCTRL_S3C24XX > >> > >> Signed-off-by: Heiko Stuebner<heiko@sntech.de> > >> --- > >> > >> drivers/gpio/gpio-samsung.c | 3 ++- > >> 1 file changed, 2 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > >> index a1392f4..c84503e 100644 > >> --- a/drivers/gpio/gpio-samsung.c > >> +++ b/drivers/gpio/gpio-samsung.c > >> @@ -2949,7 +2949,8 @@ static __init int samsung_gpiolib_init(void) > >> > >> int i, nr_chips; > >> int group = 0; > >> > >> -#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > >> +#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440) > >> || \ + defined(CONFIG_PINCTRL_S3C24XX) > > > > I wonder if this wouldn't be simply covered by PINCTRL_SAMSUNG (except > > PINCTRL_EXYNOS5440 which doesn't use the common part). > > Well, not added compatible for 's3c64xx-pinctrl' yet? Right, but this shouldn't have any effect on this code. PINCTRL_S3C64XX isn't selected by anything yet, so PINCTRL_SAMSUNG won't be selected when ARCH_S3C64XX is used. As for s3c64xx DT support, I'm planning to finally post patches this week. Best regards, Tomasz > - Kukjin > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions 2013-06-13 22:44 ` Heiko Stübner @ 2013-06-13 22:45 ` Heiko Stübner -1 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:45 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij chained_irq_enter and chained_irq_exit moved to a real header under linux/pinctrl instead of asm/. Update the pinctrl driver to use the correct header and fix the build error. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c index c8b0399..24446da 100644 --- a/drivers/pinctrl/pinctrl-s3c24xx.c +++ b/drivers/pinctrl/pinctrl-s3c24xx.c @@ -19,12 +19,11 @@ #include <linux/irqdomain.h> #include <linux/irq.h> #include <linux/of_irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/err.h> -#include <asm/mach/irq.h> - #include "pinctrl-samsung.h" #define NUM_EINT 24 -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions @ 2013-06-13 22:45 ` Heiko Stübner 0 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:45 UTC (permalink / raw) To: linux-arm-kernel chained_irq_enter and chained_irq_exit moved to a real header under linux/pinctrl instead of asm/. Update the pinctrl driver to use the correct header and fix the build error. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c index c8b0399..24446da 100644 --- a/drivers/pinctrl/pinctrl-s3c24xx.c +++ b/drivers/pinctrl/pinctrl-s3c24xx.c @@ -19,12 +19,11 @@ #include <linux/irqdomain.h> #include <linux/irq.h> #include <linux/of_irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/err.h> -#include <asm/mach/irq.h> - #include "pinctrl-samsung.h" #define NUM_EINT 24 -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* RE: [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions 2013-06-13 22:45 ` Heiko Stübner @ 2013-06-17 13:16 ` Kukjin Kim -1 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 13:16 UTC (permalink / raw) To: 'Heiko Stübner' Cc: linux-arm-kernel, linux-samsung-soc, 'Grant Likely', linus.walleij Heiko Stübner wrote: > > chained_irq_enter and chained_irq_exit moved to a real header under > linux/pinctrl instead of asm/. > > Update the pinctrl driver to use the correct header and fix the build > error. > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl- > s3c24xx.c > index c8b0399..24446da 100644 > --- a/drivers/pinctrl/pinctrl-s3c24xx.c > +++ b/drivers/pinctrl/pinctrl-s3c24xx.c > @@ -19,12 +19,11 @@ > #include <linux/irqdomain.h> > #include <linux/irq.h> > #include <linux/of_irq.h> > +#include <linux/irqchip/chained_irq.h> > #include <linux/io.h> > #include <linux/slab.h> > #include <linux/err.h> > > -#include <asm/mach/irq.h> > - > #include "pinctrl-samsung.h" > > #define NUM_EINT 24 > -- > 1.7.10.4 Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) Linus, if any problems, please let me know. Thanks, - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions @ 2013-06-17 13:16 ` Kukjin Kim 0 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 13:16 UTC (permalink / raw) To: linux-arm-kernel Heiko St?bner wrote: > > chained_irq_enter and chained_irq_exit moved to a real header under > linux/pinctrl instead of asm/. > > Update the pinctrl driver to use the correct header and fix the build > error. > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> > --- > drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl- > s3c24xx.c > index c8b0399..24446da 100644 > --- a/drivers/pinctrl/pinctrl-s3c24xx.c > +++ b/drivers/pinctrl/pinctrl-s3c24xx.c > @@ -19,12 +19,11 @@ > #include <linux/irqdomain.h> > #include <linux/irq.h> > #include <linux/of_irq.h> > +#include <linux/irqchip/chained_irq.h> > #include <linux/io.h> > #include <linux/slab.h> > #include <linux/err.h> > > -#include <asm/mach/irq.h> > - > #include "pinctrl-samsung.h" > > #define NUM_EINT 24 > -- > 1.7.10.4 Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) Linus, if any problems, please let me know. Thanks, - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions 2013-06-17 13:16 ` Kukjin Kim @ 2013-06-17 15:45 ` Linus Walleij -1 siblings, 0 replies; 26+ messages in thread From: Linus Walleij @ 2013-06-17 15:45 UTC (permalink / raw) To: Kukjin Kim Cc: Heiko Stübner, linux-arm-kernel@lists.infradead.org, linux-samsung-soc, Grant Likely On Mon, Jun 17, 2013 at 3:16 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > Heiko Stübner wrote: >> >> chained_irq_enter and chained_irq_exit moved to a real header under >> linux/pinctrl instead of asm/. >> >> Update the pinctrl driver to use the correct header and fix the build >> error. >> >> Signed-off-by: Heiko Stuebner <heiko@sntech.de> (...) > > Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) > > Linus, if any problems, please let me know. No that should work fine. Nothing is touching pinctrl-s3c in my pinctrl tree so: Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions @ 2013-06-17 15:45 ` Linus Walleij 0 siblings, 0 replies; 26+ messages in thread From: Linus Walleij @ 2013-06-17 15:45 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jun 17, 2013 at 3:16 PM, Kukjin Kim <kgene.kim@samsung.com> wrote: > Heiko St?bner wrote: >> >> chained_irq_enter and chained_irq_exit moved to a real header under >> linux/pinctrl instead of asm/. >> >> Update the pinctrl driver to use the correct header and fix the build >> error. >> >> Signed-off-by: Heiko Stuebner <heiko@sntech.de> (...) > > Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) > > Linus, if any problems, please let me know. No that should work fine. Nothing is touching pinctrl-s3c in my pinctrl tree so: Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions 2013-06-17 15:45 ` Linus Walleij @ 2013-06-17 15:58 ` Kukjin Kim -1 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 15:58 UTC (permalink / raw) To: Linus Walleij Cc: Kukjin Kim, Heiko Stübner, linux-arm-kernel@lists.infradead.org, linux-samsung-soc, Grant Likely On 06/18/13 00:45, Linus Walleij wrote: > On Mon, Jun 17, 2013 at 3:16 PM, Kukjin Kim<kgene.kim@samsung.com> wrote: >> Heiko Stübner wrote: >>> >>> chained_irq_enter and chained_irq_exit moved to a real header under >>> linux/pinctrl instead of asm/. >>> >>> Update the pinctrl driver to use the correct header and fix the build >>> error. >>> >>> Signed-off-by: Heiko Stuebner<heiko@sntech.de> > (...) >> >> Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) >> >> Linus, if any problems, please let me know. > > No that should work fine. Nothing is touching pinctrl-s3c in my > pinctrl tree so: > Acked-by: Linus Walleij<linus.walleij@linaro.org> > Thanks, applied with Linus' ack. - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions @ 2013-06-17 15:58 ` Kukjin Kim 0 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-17 15:58 UTC (permalink / raw) To: linux-arm-kernel On 06/18/13 00:45, Linus Walleij wrote: > On Mon, Jun 17, 2013 at 3:16 PM, Kukjin Kim<kgene.kim@samsung.com> wrote: >> Heiko St?bner wrote: >>> >>> chained_irq_enter and chained_irq_exit moved to a real header under >>> linux/pinctrl instead of asm/. >>> >>> Update the pinctrl driver to use the correct header and fix the build >>> error. >>> >>> Signed-off-by: Heiko Stuebner<heiko@sntech.de> > (...) >> >> Hmm, would be nice if I could take 1st and 2nd into samsung tree :-) >> >> Linus, if any problems, please let me know. > > No that should work fine. Nothing is touching pinctrl-s3c in my > pinctrl tree so: > Acked-by: Linus Walleij<linus.walleij@linaro.org> > Thanks, applied with Linus' ack. - Kukjin ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata 2013-06-13 22:44 ` Heiko Stübner @ 2013-06-13 22:46 ` Heiko Stübner -1 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:46 UTC (permalink / raw) To: Kukjin Kim Cc: linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij Commit 9ee51f01eee8 (tty: serial/samsung: make register definitions global) removed the S3C2410_PA_UARTX defines that the newly merged s3c2416 dt support still expected. So update mach-s3c2416-dt.c to use the S3C24XX_PA_UART constant until we have support for the common clock framework the the s3c2416-dt. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f5c9072..f50454a 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -43,13 +43,13 @@ * data from the device tree. */ static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, "s3c2440-uart.3", NULL), OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, "s3c-sdhci.0", NULL), -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata @ 2013-06-13 22:46 ` Heiko Stübner 0 siblings, 0 replies; 26+ messages in thread From: Heiko Stübner @ 2013-06-13 22:46 UTC (permalink / raw) To: linux-arm-kernel Commit 9ee51f01eee8 (tty: serial/samsung: make register definitions global) removed the S3C2410_PA_UARTX defines that the newly merged s3c2416 dt support still expected. So update mach-s3c2416-dt.c to use the S3C24XX_PA_UART constant until we have support for the common clock framework the the s3c2416-dt. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f5c9072..f50454a 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -43,13 +43,13 @@ * data from the device tree. */ static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3, + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, "s3c2440-uart.3", NULL), OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, "s3c-sdhci.0", NULL), -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH 3/3] ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata 2013-06-13 22:46 ` Heiko Stübner @ 2013-06-18 17:39 ` Kukjin Kim -1 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-18 17:39 UTC (permalink / raw) To: Heiko Stübner Cc: Kukjin Kim, linux-arm-kernel, linux-samsung-soc, Grant Likely, linus.walleij On 06/14/13 07:46, Heiko Stübner wrote: > Commit 9ee51f01eee8 (tty: serial/samsung: make register definitions global) > removed the S3C2410_PA_UARTX defines that the newly merged s3c2416 dt > support still expected. > > So update mach-s3c2416-dt.c to use the S3C24XX_PA_UART constant > until we have support for the common clock framework the the s3c2416-dt. > OK, applied. Thanks, - Kukjin > Signed-off-by: Heiko Stuebner<heiko@sntech.de> > --- > arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > index f5c9072..f50454a 100644 > --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > @@ -43,13 +43,13 @@ > * data from the device tree. > */ > static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, > "s3c2440-uart.0", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, > "s3c2440-uart.1", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, > "s3c2440-uart.2", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, > "s3c2440-uart.3", NULL), > OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, > "s3c-sdhci.0", NULL), ^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH 3/3] ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata @ 2013-06-18 17:39 ` Kukjin Kim 0 siblings, 0 replies; 26+ messages in thread From: Kukjin Kim @ 2013-06-18 17:39 UTC (permalink / raw) To: linux-arm-kernel On 06/14/13 07:46, Heiko St?bner wrote: > Commit 9ee51f01eee8 (tty: serial/samsung: make register definitions global) > removed the S3C2410_PA_UARTX defines that the newly merged s3c2416 dt > support still expected. > > So update mach-s3c2416-dt.c to use the S3C24XX_PA_UART constant > until we have support for the common clock framework the the s3c2416-dt. > OK, applied. Thanks, - Kukjin > Signed-off-by: Heiko Stuebner<heiko@sntech.de> > --- > arch/arm/mach-s3c24xx/mach-s3c2416-dt.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > index f5c9072..f50454a 100644 > --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c > @@ -43,13 +43,13 @@ > * data from the device tree. > */ > static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART0, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, > "s3c2440-uart.0", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART1, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, > "s3c2440-uart.1", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2410_PA_UART2, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, > "s3c2440-uart.2", NULL), > - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C2443_PA_UART3, > + OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, > "s3c2440-uart.3", NULL), > OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, > "s3c-sdhci.0", NULL), ^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2013-06-18 17:39 UTC | newest] Thread overview: 26+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-06-13 22:44 [PATCH 0/3] ARM: S3C24XX: s3c2416 build fixes Heiko Stübner 2013-06-13 22:44 ` Heiko Stübner 2013-06-13 22:45 ` [PATCH 1/3] gpio: samsung: add PINCTRL_S3C24XX to exclude options Heiko Stübner 2013-06-13 22:45 ` Heiko Stübner 2013-06-17 13:13 ` Kukjin Kim 2013-06-17 13:13 ` Kukjin Kim 2013-06-17 16:49 ` Linus Walleij 2013-06-17 16:49 ` Linus Walleij 2013-06-17 13:19 ` Tomasz Figa 2013-06-17 13:19 ` Tomasz Figa 2013-06-17 15:43 ` Kukjin Kim 2013-06-17 15:43 ` Kukjin Kim 2013-06-17 15:48 ` Tomasz Figa 2013-06-17 15:48 ` Tomasz Figa 2013-06-13 22:45 ` [PATCH 2/3] pinctrl: s3c24xx: use correct header for chained_irq functions Heiko Stübner 2013-06-13 22:45 ` Heiko Stübner 2013-06-17 13:16 ` Kukjin Kim 2013-06-17 13:16 ` Kukjin Kim 2013-06-17 15:45 ` Linus Walleij 2013-06-17 15:45 ` Linus Walleij 2013-06-17 15:58 ` Kukjin Kim 2013-06-17 15:58 ` Kukjin Kim 2013-06-13 22:46 ` [PATCH 3/3] ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata Heiko Stübner 2013-06-13 22:46 ` Heiko Stübner 2013-06-18 17:39 ` Kukjin Kim 2013-06-18 17:39 ` Kukjin Kim
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.