From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>,
jonghwa3.lee@samsung.com
Subject: Re: [PATCH V6 20/30] thermal: exynos: use device resource management infrastructure
Date: Wed, 19 Jun 2013 19:42:25 -0400 [thread overview]
Message-ID: <51C241E1.3060909@ti.com> (raw)
In-Reply-To: <1371451599-31035-21-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 5213 bytes --]
On 17-06-2013 02:46, Amit Daniel Kachhap wrote:
> This patch uses the device pointer stored in the configuration structure
> and converts to dev_* prints and devm API's.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/thermal/samsung/exynos_thermal_common.c | 39 ++++++++++++++--------
> 1 files changed, 25 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> index 2873ca3..59b47e3 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -52,7 +52,8 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
> {
> struct exynos_thermal_zone *th_zone = thermal->devdata;
> if (!th_zone) {
> - pr_notice("thermal zone not registered\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "thermal zone not registered\n");
> return 0;
> }
>
> @@ -68,8 +69,9 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
>
> th_zone->mode = mode;
> thermal_zone_device_update(thermal);
> - pr_info("thermal polling set for duration=%d msec\n",
> - thermal->polling_delay);
> + dev_dbg(th_zone->sensor_conf->dev,
> + "thermal polling set for duration=%d msec\n",
> + thermal->polling_delay);
> return 0;
> }
>
> @@ -159,7 +161,8 @@ static int exynos_bind(struct thermal_zone_device *thermal,
> case WARN_ZONE:
> if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> level, 0)) {
> - pr_err("error binding cdev inst %d\n", i);
> + dev_err(data->dev,
> + "error unbinding cdev inst=%d\n", i);
> ret = -EINVAL;
> }
> th_zone->bind = true;
> @@ -204,7 +207,8 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
> case WARN_ZONE:
> if (thermal_zone_unbind_cooling_device(thermal, i,
> cdev)) {
> - pr_err("error unbinding cdev inst=%d\n", i);
> + dev_err(data->dev,
> + "error unbinding cdev inst=%d\n", i);
> ret = -EINVAL;
> }
> th_zone->bind = false;
> @@ -224,7 +228,8 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
> void *data;
>
> if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
> data = th_zone->sensor_conf->driver_data;
> @@ -243,7 +248,8 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> struct exynos_thermal_zone *th_zone = thermal->devdata;
>
> if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
> data = th_zone->sensor_conf->driver_data;
> @@ -337,11 +343,13 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> struct exynos_thermal_zone *th_zone;
>
> if (!sensor_conf || !sensor_conf->read_temperature) {
> - pr_err("Temperature sensor not initialised\n");
> + dev_err(sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
>
> - th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> + th_zone = devm_kzalloc(sensor_conf->dev,
> + sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> if (!th_zone)
> return -ENOMEM;
>
> @@ -350,7 +358,8 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> cpumask_set_cpu(0, &mask_val);
> th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> if (IS_ERR(th_zone->cool_dev[0])) {
> - pr_err("Failed to register cpufreq cooling device\n");
> + dev_err(sensor_conf->dev,
> + "Failed to register cpufreq cooling device\n");
> ret = -EINVAL;
> goto err_unregister;
> }
> @@ -364,14 +373,16 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> IDLE_INTERVAL);
>
> if (IS_ERR(th_zone->therm_dev)) {
> - pr_err("Failed to register thermal zone device\n");
> + dev_err(sensor_conf->dev,
> + "Failed to register thermal zone device\n");
> ret = PTR_ERR(th_zone->therm_dev);
> goto err_unregister;
> }
> th_zone->mode = THERMAL_DEVICE_ENABLED;
> sensor_conf->pzone_data = th_zone;
>
> - pr_info("Exynos: Kernel Thermal management registered\n");
> + dev_info(sensor_conf->dev,
> + "Exynos: Thermal zone(%s) registered\n", sensor_conf->name);
>
> return 0;
>
> @@ -397,6 +408,6 @@ void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
> cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> }
>
> - kfree(th_zone);
> - pr_info("Exynos: Kernel Thermal management unregistered\n");
> + dev_info(sensor_conf->dev,
> + "Exynos: Kernel Thermal management unregistered\n");
> }
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: <linux-pm@vger.kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <amit.kachhap@gmail.com>,
Kukjin Kim <kgene.kim@samsung.com>, <jonghwa3.lee@samsung.com>
Subject: Re: [PATCH V6 20/30] thermal: exynos: use device resource management infrastructure
Date: Wed, 19 Jun 2013 19:42:25 -0400 [thread overview]
Message-ID: <51C241E1.3060909@ti.com> (raw)
In-Reply-To: <1371451599-31035-21-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 5213 bytes --]
On 17-06-2013 02:46, Amit Daniel Kachhap wrote:
> This patch uses the device pointer stored in the configuration structure
> and converts to dev_* prints and devm API's.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/thermal/samsung/exynos_thermal_common.c | 39 ++++++++++++++--------
> 1 files changed, 25 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> index 2873ca3..59b47e3 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -52,7 +52,8 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
> {
> struct exynos_thermal_zone *th_zone = thermal->devdata;
> if (!th_zone) {
> - pr_notice("thermal zone not registered\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "thermal zone not registered\n");
> return 0;
> }
>
> @@ -68,8 +69,9 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
>
> th_zone->mode = mode;
> thermal_zone_device_update(thermal);
> - pr_info("thermal polling set for duration=%d msec\n",
> - thermal->polling_delay);
> + dev_dbg(th_zone->sensor_conf->dev,
> + "thermal polling set for duration=%d msec\n",
> + thermal->polling_delay);
> return 0;
> }
>
> @@ -159,7 +161,8 @@ static int exynos_bind(struct thermal_zone_device *thermal,
> case WARN_ZONE:
> if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> level, 0)) {
> - pr_err("error binding cdev inst %d\n", i);
> + dev_err(data->dev,
> + "error unbinding cdev inst=%d\n", i);
> ret = -EINVAL;
> }
> th_zone->bind = true;
> @@ -204,7 +207,8 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
> case WARN_ZONE:
> if (thermal_zone_unbind_cooling_device(thermal, i,
> cdev)) {
> - pr_err("error unbinding cdev inst=%d\n", i);
> + dev_err(data->dev,
> + "error unbinding cdev inst=%d\n", i);
> ret = -EINVAL;
> }
> th_zone->bind = false;
> @@ -224,7 +228,8 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
> void *data;
>
> if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
> data = th_zone->sensor_conf->driver_data;
> @@ -243,7 +248,8 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> struct exynos_thermal_zone *th_zone = thermal->devdata;
>
> if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> + dev_err(th_zone->sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
> data = th_zone->sensor_conf->driver_data;
> @@ -337,11 +343,13 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> struct exynos_thermal_zone *th_zone;
>
> if (!sensor_conf || !sensor_conf->read_temperature) {
> - pr_err("Temperature sensor not initialised\n");
> + dev_err(sensor_conf->dev,
> + "Temperature sensor not initialised\n");
> return -EINVAL;
> }
>
> - th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> + th_zone = devm_kzalloc(sensor_conf->dev,
> + sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> if (!th_zone)
> return -ENOMEM;
>
> @@ -350,7 +358,8 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> cpumask_set_cpu(0, &mask_val);
> th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> if (IS_ERR(th_zone->cool_dev[0])) {
> - pr_err("Failed to register cpufreq cooling device\n");
> + dev_err(sensor_conf->dev,
> + "Failed to register cpufreq cooling device\n");
> ret = -EINVAL;
> goto err_unregister;
> }
> @@ -364,14 +373,16 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> IDLE_INTERVAL);
>
> if (IS_ERR(th_zone->therm_dev)) {
> - pr_err("Failed to register thermal zone device\n");
> + dev_err(sensor_conf->dev,
> + "Failed to register thermal zone device\n");
> ret = PTR_ERR(th_zone->therm_dev);
> goto err_unregister;
> }
> th_zone->mode = THERMAL_DEVICE_ENABLED;
> sensor_conf->pzone_data = th_zone;
>
> - pr_info("Exynos: Kernel Thermal management registered\n");
> + dev_info(sensor_conf->dev,
> + "Exynos: Thermal zone(%s) registered\n", sensor_conf->name);
>
> return 0;
>
> @@ -397,6 +408,6 @@ void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
> cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> }
>
> - kfree(th_zone);
> - pr_info("Exynos: Kernel Thermal management unregistered\n");
> + dev_info(sensor_conf->dev,
> + "Exynos: Kernel Thermal management unregistered\n");
> }
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
next prev parent reply other threads:[~2013-06-19 23:42 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-17 6:46 [PATCH V6 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-17 6:46 ` [PATCH V6 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-19 18:46 ` Eduardo Valentin
2013-06-19 18:46 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-19 18:46 ` Eduardo Valentin
2013-06-19 18:46 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-19 18:48 ` Eduardo Valentin
2013-06-19 18:48 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-19 18:45 ` Eduardo Valentin
2013-06-19 18:45 ` Eduardo Valentin
2013-06-21 1:50 ` amit daniel kachhap
2013-06-21 14:30 ` Eduardo Valentin
2013-06-21 14:30 ` Eduardo Valentin
2013-06-19 19:01 ` Eduardo Valentin
2013-06-19 19:01 ` Eduardo Valentin
2013-06-21 2:48 ` amit daniel kachhap
2013-06-21 14:23 ` Eduardo Valentin
2013-06-21 14:23 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-17 6:46 ` [PATCH V6 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-19 19:18 ` Eduardo Valentin
2013-06-19 19:18 ` Eduardo Valentin
2013-06-19 19:20 ` Eduardo Valentin
2013-06-19 19:20 ` Eduardo Valentin
2013-06-21 4:34 ` amit daniel kachhap
2013-06-21 4:33 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-19 19:35 ` Eduardo Valentin
2013-06-19 19:35 ` Eduardo Valentin
2013-06-19 19:43 ` Eduardo Valentin
2013-06-19 19:43 ` Eduardo Valentin
2013-06-21 5:06 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-19 19:55 ` Eduardo Valentin
2013-06-19 19:55 ` Eduardo Valentin
2013-06-21 2:01 ` amit daniel kachhap
2013-06-21 14:31 ` Eduardo Valentin
2013-06-21 14:31 ` Eduardo Valentin
2013-06-24 3:57 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-19 20:19 ` Eduardo Valentin
2013-06-19 20:19 ` Eduardo Valentin
2013-06-19 20:52 ` Eduardo Valentin
2013-06-19 20:52 ` Eduardo Valentin
2013-06-21 8:50 ` amit daniel kachhap
2013-06-21 14:26 ` Eduardo Valentin
2013-06-21 14:26 ` Eduardo Valentin
2013-06-21 6:39 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-19 21:02 ` Eduardo Valentin
2013-06-19 21:02 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-19 22:23 ` Eduardo Valentin
2013-06-19 22:23 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-19 22:26 ` Eduardo Valentin
2013-06-19 22:26 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-19 22:40 ` Eduardo Valentin
2013-06-19 22:40 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-19 22:44 ` Eduardo Valentin
2013-06-19 22:44 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-19 22:54 ` Eduardo Valentin
2013-06-19 22:54 ` Eduardo Valentin
2013-06-19 23:04 ` Eduardo Valentin
2013-06-19 23:04 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-19 23:03 ` Eduardo Valentin
2013-06-19 23:03 ` Eduardo Valentin
2013-06-21 12:30 ` amit daniel kachhap
2013-06-21 14:35 ` Eduardo Valentin
2013-06-21 14:35 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-19 23:09 ` Eduardo Valentin
2013-06-19 23:09 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-19 23:27 ` Eduardo Valentin
2013-06-19 23:27 ` Eduardo Valentin
2013-06-21 12:46 ` amit daniel kachhap
2013-06-21 14:28 ` Eduardo Valentin
2013-06-21 14:28 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-19 23:35 ` Eduardo Valentin
2013-06-19 23:35 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-19 23:42 ` Eduardo Valentin [this message]
2013-06-19 23:42 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 21/30] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-19 23:45 ` Eduardo Valentin
2013-06-19 23:45 ` Eduardo Valentin
2013-06-21 14:34 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 22/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-19 23:53 ` Eduardo Valentin
2013-06-19 23:53 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 23/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-20 2:06 ` Eduardo Valentin
2013-06-20 2:06 ` Eduardo Valentin
2013-06-21 15:17 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 24/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-20 2:18 ` Eduardo Valentin
2013-06-20 2:18 ` Eduardo Valentin
2013-06-21 15:19 ` amit daniel kachhap
2013-06-21 15:21 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 25/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-20 2:22 ` Eduardo Valentin
2013-06-20 2:22 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 26/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-20 2:30 ` Eduardo Valentin
2013-06-20 2:30 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 27/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-20 2:32 ` Eduardo Valentin
2013-06-20 2:32 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 28/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-20 2:33 ` Eduardo Valentin
2013-06-20 2:33 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-20 2:37 ` Eduardo Valentin
2013-06-20 2:37 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-19 18:47 ` Eduardo Valentin
2013-06-19 18:47 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C241E1.3060909@ti.com \
--to=eduardo.valentin@ti.com \
--cc=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=jonghwa3.lee@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.