All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Simek <monstr@monstr.eu>
To: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Joe Perches <joe@perches.com>, Pavel Machek <pavel@ucw.cz>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [PATCH] MAINTAINERS: Remove Hans J. Koch entries
Date: Fri, 21 Jun 2013 09:15:20 +0000	[thread overview]
Message-ID: <51C419A8.3010707@monstr.eu> (raw)
In-Reply-To: <20130621025031.GG4775@local>


[-- Attachment #1.1: Type: text/plain, Size: 2433 bytes --]

On 06/21/2013 04:50 AM, Hans J. Koch wrote:
> On Thu, Jun 20, 2013 at 09:20:27AM -0700, Joe Perches wrote:
>> On Thu, 2013-06-20 at 18:01 +0200, Pavel Machek wrote:
>>> Anyway, Hans disappeared, so Greg takes patches, again.
> 
> I wasn't able to take part in kernel development because I was heavily
> involved in hardware development project. I always thought it would be just
> a few more days, but then it became half a year. I know I should have given
> an explanation and didn't. Sorry for that.
> 
>>
>> Maybe this is appropriate then.
>>
>> Signed-off-by: Joe Perches <joe@perches.com>
>> ---
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 69fea4f..dc9d04a 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -5253,9 +5253,8 @@ F:	Documentation/hwmon/max16065
>>  F:	drivers/hwmon/max16065.c
>>  
>>  MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
>> -M:	"Hans J. Koch" <hjk@hansjkoch.de>
>>  L:	lm-sensors@lm-sensors.org
>> -S:	Maintained
>> +S:	Orphan
>>  F:	Documentation/hwmon/max6650
>>  F:	drivers/hwmon/max6650.c
> 
> ACK to that one. It was never my idea to have a MAINTAINERS entry for that.
> Jean Delvare suggested it, so it came in. The MAX6650 was in a project I was
> working on 6 years ago, and I wrote the driver at that time. Meanwhile, I
> don't even have hardware with a MAX6650 anymore.
> 
> Does each little driver really need a MAINTAINERS entry? In my opinion, it
> should only be there if it is clear that it's not just a short project work.
> 
>>  
>> @@ -8795,7 +8794,6 @@ F:	fs/hostfs/
>>  F:	fs/hppfs/
>>  
>>  USERSPACE I/O (UIO)
>> -M:	"Hans J. Koch" <hjk@hansjkoch.de>
>>  M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>  S:	Maintained
>>  F:	Documentation/DocBook/uio-howto.tmpl
> 
> Well, you can do that if you want. But I still feel associated with UIO
> and sincerely hope I'm back again to fulfill my duties as a maintainer.

ok then can you please comment my patches?
I think it is not necessary to have one driver which support UIO without IRQ
and then second which support both cases.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <monstr@monstr.eu>
To: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Joe Perches <joe@perches.com>, Pavel Machek <pavel@ucw.cz>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [PATCH] MAINTAINERS: Remove Hans J. Koch entries
Date: Fri, 21 Jun 2013 11:15:20 +0200	[thread overview]
Message-ID: <51C419A8.3010707@monstr.eu> (raw)
In-Reply-To: <20130621025031.GG4775@local>

[-- Attachment #1: Type: text/plain, Size: 2433 bytes --]

On 06/21/2013 04:50 AM, Hans J. Koch wrote:
> On Thu, Jun 20, 2013 at 09:20:27AM -0700, Joe Perches wrote:
>> On Thu, 2013-06-20 at 18:01 +0200, Pavel Machek wrote:
>>> Anyway, Hans disappeared, so Greg takes patches, again.
> 
> I wasn't able to take part in kernel development because I was heavily
> involved in hardware development project. I always thought it would be just
> a few more days, but then it became half a year. I know I should have given
> an explanation and didn't. Sorry for that.
> 
>>
>> Maybe this is appropriate then.
>>
>> Signed-off-by: Joe Perches <joe@perches.com>
>> ---
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 69fea4f..dc9d04a 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -5253,9 +5253,8 @@ F:	Documentation/hwmon/max16065
>>  F:	drivers/hwmon/max16065.c
>>  
>>  MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
>> -M:	"Hans J. Koch" <hjk@hansjkoch.de>
>>  L:	lm-sensors@lm-sensors.org
>> -S:	Maintained
>> +S:	Orphan
>>  F:	Documentation/hwmon/max6650
>>  F:	drivers/hwmon/max6650.c
> 
> ACK to that one. It was never my idea to have a MAINTAINERS entry for that.
> Jean Delvare suggested it, so it came in. The MAX6650 was in a project I was
> working on 6 years ago, and I wrote the driver at that time. Meanwhile, I
> don't even have hardware with a MAX6650 anymore.
> 
> Does each little driver really need a MAINTAINERS entry? In my opinion, it
> should only be there if it is clear that it's not just a short project work.
> 
>>  
>> @@ -8795,7 +8794,6 @@ F:	fs/hostfs/
>>  F:	fs/hppfs/
>>  
>>  USERSPACE I/O (UIO)
>> -M:	"Hans J. Koch" <hjk@hansjkoch.de>
>>  M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>  S:	Maintained
>>  F:	Documentation/DocBook/uio-howto.tmpl
> 
> Well, you can do that if you want. But I still feel associated with UIO
> and sincerely hope I'm back again to fulfill my duties as a maintainer.

ok then can you please comment my patches?
I think it is not necessary to have one driver which support UIO without IRQ
and then second which support both cases.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]

  parent reply	other threads:[~2013-06-21  9:15 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-23 14:01 [RFC PATCH 1/2] uio: Use Use of_match_ptr() macro in uio_pdrv_genirq.c Michal Simek
2013-05-23 14:01 ` Michal Simek
2013-05-23 14:01 ` [RFC PATCH 2/2] uio: Add two platform uio drivers to one Michal Simek
2013-05-29 11:28   ` Michal Simek
2013-06-03 12:34     ` Michal Simek
2013-06-03 21:05       ` Greg Kroah-Hartman
2013-06-12  5:43         ` Michal Simek
2013-06-20 16:01         ` Pavel Machek
2013-06-20 16:20           ` [lm-sensors] [PATCH] MAINTAINERS: Remove Hans J. Koch entries Joe Perches
2013-06-20 16:20             ` Joe Perches
2013-06-20 16:30             ` [lm-sensors] " Guenter Roeck
2013-06-20 16:30               ` Guenter Roeck
2013-06-20 17:09               ` Joe Perches
2013-06-20 17:09                 ` Joe Perches
2013-06-21  2:50             ` Hans J. Koch
2013-06-21  2:50               ` Hans J. Koch
2013-06-21  3:08               ` [lm-sensors] " Joe Perches
2013-06-21  3:08                 ` Joe Perches
2013-06-21  7:47               ` [lm-sensors] " Jean Delvare
2013-06-21  7:47                 ` Jean Delvare
2013-06-21  9:15               ` Michal Simek [this message]
2013-06-21  9:15                 ` Michal Simek
2013-06-20 17:11           ` [RFC PATCH 2/2] uio: Add two platform uio drivers to one Michal Simek
2013-06-20 23:13             ` Pavel Machek
2013-06-21  9:06               ` Michal Simek
2013-06-10  8:59   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51C419A8.3010707@monstr.eu \
    --to=monstr@monstr.eu \
    --cc=gregkh@linuxfoundation.org \
    --cc=hjk@hansjkoch.de \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=pavel@ucw.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.