All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>
Subject: Re: [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU
Date: Mon, 24 Jun 2013 11:50:51 -0400	[thread overview]
Message-ID: <51C86ADB.50207@ti.com> (raw)
In-Reply-To: <1372071051-3167-19-git-send-email-amit.daniel@samsung.com>

[-- Attachment #1: Type: text/plain, Size: 18187 bytes --]

On 24-06-2013 06:50, Amit Daniel Kachhap wrote:
> This patch adds support to handle multiple instances of the TMU controllers.
> This is done by removing the static structure to register with the core thermal
> and creating it dynamically for each instance of the TMU controller. The
> interrupt is made shared type to handle shared interrupts. Now since the ISR needs
> the core thermal framework to be registered so request_irq is moved after the core
> registration is done.
> Also the identifier of the TMU controller is extracted from device tree alias. This
> will be used for TMU specific initialisation.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>

Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>

> ---
>  drivers/thermal/samsung/exynos_thermal_common.h |    1 +
>  drivers/thermal/samsung/exynos_tmu.c            |  158 +++++++++++++++-------
>  drivers/thermal/samsung/exynos_tmu.h            |   13 ++
>  drivers/thermal/samsung/exynos_tmu_data.c       |  145 +++++++++++----------
>  drivers/thermal/samsung/exynos_tmu_data.h       |    4 +-
>  5 files changed, 203 insertions(+), 118 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index bfcf69e..bc3016e 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -85,6 +85,7 @@ struct thermal_sensor_conf {
>  	struct thermal_cooling_conf cooling_data;
>  	void *driver_data;
>  	void *pzone_data;
> +	struct device *dev;
>  };
>  
>  /*Functions used exynos based thermal sensor driver*/
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 4356118..7f65fe0 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -26,15 +26,32 @@
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>  #include <linux/platform_device.h>
>  
>  #include "exynos_thermal_common.h"
>  #include "exynos_tmu.h"
>  #include "exynos_tmu_data.h"
>  
> +/**
> + * struct exynos_tmu_data : A structure to hold the private data of the TMU
> +	driver
> + * @id: identifier of the one instance of the TMU controller.
> + * @pdata: pointer to the tmu platform/configuration data
> + * @base: base address of the single instance of the TMU controller.
> + * @irq: irq number of the TMU controller.
> + * @soc: id of the SOC type.
> + * @irq_work: pointer to the irq work structure.
> + * @lock: lock to implement synchronization.
> + * @clk: pointer to the clock structure.
> + * @temp_error1: fused value of the first point trim.
> + * @temp_error2: fused value of the second point trim.
> + * @reg_conf: pointer to structure to register with core thermal.
> + */
>  struct exynos_tmu_data {
> +	int id;
>  	struct exynos_tmu_platform_data *pdata;
> -	struct resource *mem;
>  	void __iomem *base;
>  	int irq;
>  	enum soc_type soc;
> @@ -42,6 +59,7 @@ struct exynos_tmu_data {
>  	struct mutex lock;
>  	struct clk *clk;
>  	u8 temp_error1, temp_error2;
> +	struct thermal_sensor_conf *reg_conf;
>  };
>  
>  /*
> @@ -345,12 +363,6 @@ static int exynos_tmu_set_emulation(void *drv_data,	unsigned long temp)
>  	{ return -EINVAL; }
>  #endif/*CONFIG_THERMAL_EMULATION*/
>  
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> -	.name			= "exynos-therm",
> -	.read_temperature	= (int (*)(void *))exynos_tmu_read,
> -	.write_emul_temp	= exynos_tmu_set_emulation,
> -};
> -
>  static void exynos_tmu_work(struct work_struct *work)
>  {
>  	struct exynos_tmu_data *data = container_of(work,
> @@ -359,7 +371,7 @@ static void exynos_tmu_work(struct work_struct *work)
>  	const struct exynos_tmu_registers *reg = pdata->registers;
>  	unsigned int val_irq;
>  
> -	exynos_report_trigger(&exynos_sensor_conf);
> +	exynos_report_trigger(data->reg_conf);
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
>  
> @@ -404,33 +416,73 @@ MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>  #endif
>  
>  static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
> -			struct platform_device *pdev)
> +			struct platform_device *pdev, int id)
>  {
>  #ifdef CONFIG_OF
> +	struct  exynos_tmu_init_data *data_table;
> +	struct exynos_tmu_platform_data *tmu_data;
>  	if (pdev->dev.of_node) {
>  		const struct of_device_id *match;
>  		match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
>  		if (!match)
>  			return NULL;
> -		return (struct exynos_tmu_platform_data *) match->data;
> +		data_table = (struct exynos_tmu_init_data *) match->data;
> +		if (!data_table || id >= data_table->tmu_count)
> +			return NULL;
> +		tmu_data = data_table->tmu_data;
> +		return (struct exynos_tmu_platform_data *) (tmu_data + id);
>  	}
>  #endif
>  	return NULL;
>  }
>  
> -static int exynos_tmu_probe(struct platform_device *pdev)
> +static int exynos_map_dt_data(struct platform_device *pdev)
>  {
> -	struct exynos_tmu_data *data;
> -	struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> -	int ret, i;
> +	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> +	struct exynos_tmu_platform_data *pdata;
> +	struct resource res;
> +
> +	if (!data)
> +		return -ENODEV;
>  
> -	if (!pdata)
> -		pdata = exynos_get_driver_data(pdev);
> +	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
> +	if (data->id < 0)
> +		data->id = 0;
>  
> +	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> +	if (data->irq <= 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ\n");
> +		return -ENODEV;
> +	}
> +
> +	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
> +		dev_err(&pdev->dev, "failed to get Resource 0\n");
> +		return -ENODEV;
> +	}
> +
> +	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
> +	if (!data->base) {
> +		dev_err(&pdev->dev, "Failed to ioremap memory\n");
> +		return -EADDRNOTAVAIL;
> +	}
> +
> +	pdata = exynos_get_driver_data(pdev, data->id);
>  	if (!pdata) {
>  		dev_err(&pdev->dev, "No platform init data supplied.\n");
>  		return -ENODEV;
>  	}
> +	data->pdata = pdata;
> +
> +	return 0;
> +}
> +
> +static int exynos_tmu_probe(struct platform_device *pdev)
> +{
> +	struct exynos_tmu_data *data;
> +	struct exynos_tmu_platform_data *pdata;
> +	struct thermal_sensor_conf *sensor_conf;
> +	int ret, i;
> +
>  	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
>  					GFP_KERNEL);
>  	if (!data) {
> @@ -438,25 +490,16 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> -	data->irq = platform_get_irq(pdev, 0);
> -	if (data->irq < 0) {
> -		dev_err(&pdev->dev, "Failed to get platform irq\n");
> -		return data->irq;
> -	}
> +	platform_set_drvdata(pdev, data);
> +	mutex_init(&data->lock);
>  
> -	INIT_WORK(&data->irq_work, exynos_tmu_work);
> +	ret = exynos_map_dt_data(pdev);
> +	if (ret)
> +		return ret;
>  
> -	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> -	if (IS_ERR(data->base))
> -		return PTR_ERR(data->base);
> +	pdata = data->pdata;
>  
> -	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> -		IRQF_TRIGGER_RISING, "exynos-tmu", data);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> -		return ret;
> -	}
> +	INIT_WORK(&data->irq_work, exynos_tmu_work);
>  
>  	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
>  	if (IS_ERR(data->clk)) {
> @@ -477,10 +520,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> -	data->pdata = pdata;
> -	platform_set_drvdata(pdev, data);
> -	mutex_init(&data->lock);
> -
>  	ret = exynos_tmu_initialize(pdev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to initialize TMU\n");
> @@ -489,35 +528,54 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  
>  	exynos_tmu_control(pdev, true);
>  
> -	/* Register the sensor with thermal management interface */
> -	(&exynos_sensor_conf)->driver_data = data;
> -	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
> +	/* Allocate a structure to register with the exynos core thermal */
> +	sensor_conf = devm_kzalloc(&pdev->dev,
> +				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
> +	if (!sensor_conf) {
> +		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
> +		ret = -ENOMEM;
> +		goto err_clk;
> +	}
> +	sprintf(sensor_conf->name, "therm_zone%d", data->id);
> +	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
> +	sensor_conf->write_emul_temp =
> +		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> +	sensor_conf->driver_data = data;
> +	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
>  			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
>  			pdata->trigger_enable[3];
>  
> -	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) {
> -		exynos_sensor_conf.trip_data.trip_val[i] =
> +	for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
> +		sensor_conf->trip_data.trip_val[i] =
>  			pdata->threshold + pdata->trigger_levels[i];
> -		exynos_sensor_conf.trip_data.trip_type[i] =
> +		sensor_conf->trip_data.trip_type[i] =
>  					pdata->trigger_type[i];
>  	}
>  
> -	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> +	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
>  
> -	exynos_sensor_conf.cooling_data.freq_clip_count =
> -						pdata->freq_tab_count;
> +	sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
>  	for (i = 0; i < pdata->freq_tab_count; i++) {
> -		exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> +		sensor_conf->cooling_data.freq_data[i].freq_clip_max =
>  					pdata->freq_tab[i].freq_clip_max;
> -		exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> +		sensor_conf->cooling_data.freq_data[i].temp_level =
>  					pdata->freq_tab[i].temp_level;
>  	}
> -
> -	ret = exynos_register_thermal(&exynos_sensor_conf);
> +	sensor_conf->dev = &pdev->dev;
> +	/* Register the sensor with thermal management interface */
> +	ret = exynos_register_thermal(sensor_conf);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to register thermal interface\n");
>  		goto err_clk;
>  	}
> +	data->reg_conf = sensor_conf;
> +
> +	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> +		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> +		goto err_clk;
> +	}
>  
>  	return 0;
>  err_clk:
> @@ -531,7 +589,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>  
>  	exynos_tmu_control(pdev, false);
>  
> -	exynos_unregister_thermal(&exynos_sensor_conf);
> +	exynos_unregister_thermal(data->reg_conf);
>  
>  	clk_unprepare(data->clk);
>  
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index ef5dc0e..53fa702 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -250,4 +250,17 @@ struct exynos_tmu_platform_data {
>  	unsigned int freq_tab_count;
>  	const struct exynos_tmu_registers *registers;
>  };
> +
> +/**
> + * struct exynos_tmu_init_data
> + * @tmu_count: number of TMU instances.
> + * @tmu_data: platform data of all TMU instances.
> + * This structure is required to store data for multi-instance exynos tmu
> + * driver.
> + */
> +struct exynos_tmu_init_data {
> +	int tmu_count;
> +	struct exynos_tmu_platform_data tmu_data[];
> +};
> +
>  #endif /* _EXYNOS_TMU_H */
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 217b8f5..a5c25b4 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -48,38 +48,44 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
>  	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>  	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>  };
> -struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
> -	.threshold = 80,
> -	.trigger_levels[0] = 5,
> -	.trigger_levels[1] = 20,
> -	.trigger_levels[2] = 30,
> -	.trigger_enable[0] = true,
> -	.trigger_enable[1] = true,
> -	.trigger_enable[2] = true,
> -	.trigger_enable[3] = false,
> -	.trigger_type[0] = THROTTLE_ACTIVE,
> -	.trigger_type[1] = THROTTLE_ACTIVE,
> -	.trigger_type[2] = SW_TRIP,
> -	.max_trigger_level = 4,
> -	.gain = 15,
> -	.reference_voltage = 7,
> -	.cal_type = TYPE_ONE_POINT_TRIMMING,
> -	.min_efuse_value = 40,
> -	.max_efuse_value = 100,
> -	.first_point_trim = 25,
> -	.second_point_trim = 85,
> -	.default_temp_offset = 50,
> -	.freq_tab[0] = {
> -		.freq_clip_max = 800 * 1000,
> -		.temp_level = 85,
> -	},
> -	.freq_tab[1] = {
> -		.freq_clip_max = 200 * 1000,
> -		.temp_level = 100,
> +
> +struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
> +	.tmu_data = {
> +		{
> +		.threshold = 80,
> +		.trigger_levels[0] = 5,
> +		.trigger_levels[1] = 20,
> +		.trigger_levels[2] = 30,
> +		.trigger_enable[0] = true,
> +		.trigger_enable[1] = true,
> +		.trigger_enable[2] = true,
> +		.trigger_enable[3] = false,
> +		.trigger_type[0] = THROTTLE_ACTIVE,
> +		.trigger_type[1] = THROTTLE_ACTIVE,
> +		.trigger_type[2] = SW_TRIP,
> +		.max_trigger_level = 4,
> +		.gain = 15,
> +		.reference_voltage = 7,
> +		.cal_type = TYPE_ONE_POINT_TRIMMING,
> +		.min_efuse_value = 40,
> +		.max_efuse_value = 100,
> +		.first_point_trim = 25,
> +		.second_point_trim = 85,
> +		.default_temp_offset = 50,
> +		.freq_tab[0] = {
> +			.freq_clip_max = 800 * 1000,
> +			.temp_level = 85,
> +			},
> +		.freq_tab[1] = {
> +			.freq_clip_max = 200 * 1000,
> +			.temp_level = 100,
> +		},
> +		.freq_tab_count = 2,
> +		.type = SOC_ARCH_EXYNOS4210,
> +		.registers = &exynos4210_tmu_registers,
> +		},
>  	},
> -	.freq_tab_count = 2,
> -	.type = SOC_ARCH_EXYNOS4210,
> -	.registers = &exynos4210_tmu_registers,
> +	.tmu_count = 1,
>  };
>  #endif
>  
> @@ -120,41 +126,48 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
>  	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
>  	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
>  };
> -struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
> -	.threshold_falling = 10,
> -	.trigger_levels[0] = 85,
> -	.trigger_levels[1] = 103,
> -	.trigger_levels[2] = 110,
> -	.trigger_levels[3] = 120,
> -	.trigger_enable[0] = true,
> -	.trigger_enable[1] = true,
> -	.trigger_enable[2] = true,
> -	.trigger_enable[3] = false,
> -	.trigger_type[0] = THROTTLE_ACTIVE,
> -	.trigger_type[1] = THROTTLE_ACTIVE,
> -	.trigger_type[2] = SW_TRIP,
> -	.trigger_type[3] = HW_TRIP,
> -	.max_trigger_level = 4,
> -	.gain = 8,
> -	.reference_voltage = 16,
> -	.noise_cancel_mode = 4,
> -	.cal_type = TYPE_ONE_POINT_TRIMMING,
> -	.efuse_value = 55,
> -	.min_efuse_value = 40,
> -	.max_efuse_value = 100,
> -	.first_point_trim = 25,
> -	.second_point_trim = 85,
> -	.default_temp_offset = 50,
> -	.freq_tab[0] = {
> -		.freq_clip_max = 800 * 1000,
> -		.temp_level = 85,
> -	},
> -	.freq_tab[1] = {
> -		.freq_clip_max = 200 * 1000,
> -		.temp_level = 103,
> -	},
> -	.freq_tab_count = 2,
> -	.type = SOC_ARCH_EXYNOS,
> +
> +#define EXYNOS5250_TMU_DATA \
> +	.threshold_falling = 10, \
> +	.trigger_levels[0] = 85, \
> +	.trigger_levels[1] = 103, \
> +	.trigger_levels[2] = 110, \
> +	.trigger_levels[3] = 120, \
> +	.trigger_enable[0] = true, \
> +	.trigger_enable[1] = true, \
> +	.trigger_enable[2] = true, \
> +	.trigger_enable[3] = false, \
> +	.trigger_type[0] = THROTTLE_ACTIVE, \
> +	.trigger_type[1] = THROTTLE_ACTIVE, \
> +	.trigger_type[2] = SW_TRIP, \
> +	.trigger_type[3] = HW_TRIP, \
> +	.max_trigger_level = 4, \
> +	.gain = 8, \
> +	.reference_voltage = 16, \
> +	.noise_cancel_mode = 4, \
> +	.cal_type = TYPE_ONE_POINT_TRIMMING, \
> +	.efuse_value = 55, \
> +	.min_efuse_value = 40, \
> +	.max_efuse_value = 100, \
> +	.first_point_trim = 25, \
> +	.second_point_trim = 85, \
> +	.default_temp_offset = 50, \
> +	.freq_tab[0] = { \
> +		.freq_clip_max = 800 * 1000, \
> +		.temp_level = 85, \
> +	}, \
> +	.freq_tab[1] = { \
> +		.freq_clip_max = 200 * 1000, \
> +		.temp_level = 103, \
> +	}, \
> +	.freq_tab_count = 2, \
> +	.type = SOC_ARCH_EXYNOS, \
>  	.registers = &exynos5250_tmu_registers,
> +
> +struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
> +	.tmu_data = {
> +		{ EXYNOS5250_TMU_DATA },
> +	},
> +	.tmu_count = 1,
>  };
>  #endif
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 4acf070..139dbbb 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -94,14 +94,14 @@
>  #define EXYNOS_MAX_TRIGGER_PER_REG	4
>  
>  #if defined(CONFIG_CPU_EXYNOS4210)
> -extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
> +extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
>  #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>  #else
>  #define EXYNOS4210_TMU_DRV_DATA (NULL)
>  #endif
>  
>  #if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412))
> -extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data;
> +extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
>  #define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
>  #else
>  #define EXYNOS5250_TMU_DRV_DATA (NULL)
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: <linux-pm@vger.kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>,
	<linux-samsung-soc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <amit.kachhap@gmail.com>,
	Kukjin Kim <kgene.kim@samsung.com>
Subject: Re: [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU
Date: Mon, 24 Jun 2013 11:50:51 -0400	[thread overview]
Message-ID: <51C86ADB.50207@ti.com> (raw)
In-Reply-To: <1372071051-3167-19-git-send-email-amit.daniel@samsung.com>

[-- Attachment #1: Type: text/plain, Size: 18187 bytes --]

On 24-06-2013 06:50, Amit Daniel Kachhap wrote:
> This patch adds support to handle multiple instances of the TMU controllers.
> This is done by removing the static structure to register with the core thermal
> and creating it dynamically for each instance of the TMU controller. The
> interrupt is made shared type to handle shared interrupts. Now since the ISR needs
> the core thermal framework to be registered so request_irq is moved after the core
> registration is done.
> Also the identifier of the TMU controller is extracted from device tree alias. This
> will be used for TMU specific initialisation.
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>

Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>

> ---
>  drivers/thermal/samsung/exynos_thermal_common.h |    1 +
>  drivers/thermal/samsung/exynos_tmu.c            |  158 +++++++++++++++-------
>  drivers/thermal/samsung/exynos_tmu.h            |   13 ++
>  drivers/thermal/samsung/exynos_tmu_data.c       |  145 +++++++++++----------
>  drivers/thermal/samsung/exynos_tmu_data.h       |    4 +-
>  5 files changed, 203 insertions(+), 118 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index bfcf69e..bc3016e 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -85,6 +85,7 @@ struct thermal_sensor_conf {
>  	struct thermal_cooling_conf cooling_data;
>  	void *driver_data;
>  	void *pzone_data;
> +	struct device *dev;
>  };
>  
>  /*Functions used exynos based thermal sensor driver*/
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 4356118..7f65fe0 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -26,15 +26,32 @@
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>  #include <linux/platform_device.h>
>  
>  #include "exynos_thermal_common.h"
>  #include "exynos_tmu.h"
>  #include "exynos_tmu_data.h"
>  
> +/**
> + * struct exynos_tmu_data : A structure to hold the private data of the TMU
> +	driver
> + * @id: identifier of the one instance of the TMU controller.
> + * @pdata: pointer to the tmu platform/configuration data
> + * @base: base address of the single instance of the TMU controller.
> + * @irq: irq number of the TMU controller.
> + * @soc: id of the SOC type.
> + * @irq_work: pointer to the irq work structure.
> + * @lock: lock to implement synchronization.
> + * @clk: pointer to the clock structure.
> + * @temp_error1: fused value of the first point trim.
> + * @temp_error2: fused value of the second point trim.
> + * @reg_conf: pointer to structure to register with core thermal.
> + */
>  struct exynos_tmu_data {
> +	int id;
>  	struct exynos_tmu_platform_data *pdata;
> -	struct resource *mem;
>  	void __iomem *base;
>  	int irq;
>  	enum soc_type soc;
> @@ -42,6 +59,7 @@ struct exynos_tmu_data {
>  	struct mutex lock;
>  	struct clk *clk;
>  	u8 temp_error1, temp_error2;
> +	struct thermal_sensor_conf *reg_conf;
>  };
>  
>  /*
> @@ -345,12 +363,6 @@ static int exynos_tmu_set_emulation(void *drv_data,	unsigned long temp)
>  	{ return -EINVAL; }
>  #endif/*CONFIG_THERMAL_EMULATION*/
>  
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> -	.name			= "exynos-therm",
> -	.read_temperature	= (int (*)(void *))exynos_tmu_read,
> -	.write_emul_temp	= exynos_tmu_set_emulation,
> -};
> -
>  static void exynos_tmu_work(struct work_struct *work)
>  {
>  	struct exynos_tmu_data *data = container_of(work,
> @@ -359,7 +371,7 @@ static void exynos_tmu_work(struct work_struct *work)
>  	const struct exynos_tmu_registers *reg = pdata->registers;
>  	unsigned int val_irq;
>  
> -	exynos_report_trigger(&exynos_sensor_conf);
> +	exynos_report_trigger(data->reg_conf);
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
>  
> @@ -404,33 +416,73 @@ MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>  #endif
>  
>  static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
> -			struct platform_device *pdev)
> +			struct platform_device *pdev, int id)
>  {
>  #ifdef CONFIG_OF
> +	struct  exynos_tmu_init_data *data_table;
> +	struct exynos_tmu_platform_data *tmu_data;
>  	if (pdev->dev.of_node) {
>  		const struct of_device_id *match;
>  		match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
>  		if (!match)
>  			return NULL;
> -		return (struct exynos_tmu_platform_data *) match->data;
> +		data_table = (struct exynos_tmu_init_data *) match->data;
> +		if (!data_table || id >= data_table->tmu_count)
> +			return NULL;
> +		tmu_data = data_table->tmu_data;
> +		return (struct exynos_tmu_platform_data *) (tmu_data + id);
>  	}
>  #endif
>  	return NULL;
>  }
>  
> -static int exynos_tmu_probe(struct platform_device *pdev)
> +static int exynos_map_dt_data(struct platform_device *pdev)
>  {
> -	struct exynos_tmu_data *data;
> -	struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
> -	int ret, i;
> +	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> +	struct exynos_tmu_platform_data *pdata;
> +	struct resource res;
> +
> +	if (!data)
> +		return -ENODEV;
>  
> -	if (!pdata)
> -		pdata = exynos_get_driver_data(pdev);
> +	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
> +	if (data->id < 0)
> +		data->id = 0;
>  
> +	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> +	if (data->irq <= 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ\n");
> +		return -ENODEV;
> +	}
> +
> +	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
> +		dev_err(&pdev->dev, "failed to get Resource 0\n");
> +		return -ENODEV;
> +	}
> +
> +	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
> +	if (!data->base) {
> +		dev_err(&pdev->dev, "Failed to ioremap memory\n");
> +		return -EADDRNOTAVAIL;
> +	}
> +
> +	pdata = exynos_get_driver_data(pdev, data->id);
>  	if (!pdata) {
>  		dev_err(&pdev->dev, "No platform init data supplied.\n");
>  		return -ENODEV;
>  	}
> +	data->pdata = pdata;
> +
> +	return 0;
> +}
> +
> +static int exynos_tmu_probe(struct platform_device *pdev)
> +{
> +	struct exynos_tmu_data *data;
> +	struct exynos_tmu_platform_data *pdata;
> +	struct thermal_sensor_conf *sensor_conf;
> +	int ret, i;
> +
>  	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
>  					GFP_KERNEL);
>  	if (!data) {
> @@ -438,25 +490,16 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  
> -	data->irq = platform_get_irq(pdev, 0);
> -	if (data->irq < 0) {
> -		dev_err(&pdev->dev, "Failed to get platform irq\n");
> -		return data->irq;
> -	}
> +	platform_set_drvdata(pdev, data);
> +	mutex_init(&data->lock);
>  
> -	INIT_WORK(&data->irq_work, exynos_tmu_work);
> +	ret = exynos_map_dt_data(pdev);
> +	if (ret)
> +		return ret;
>  
> -	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	data->base = devm_ioremap_resource(&pdev->dev, data->mem);
> -	if (IS_ERR(data->base))
> -		return PTR_ERR(data->base);
> +	pdata = data->pdata;
>  
> -	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> -		IRQF_TRIGGER_RISING, "exynos-tmu", data);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> -		return ret;
> -	}
> +	INIT_WORK(&data->irq_work, exynos_tmu_work);
>  
>  	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
>  	if (IS_ERR(data->clk)) {
> @@ -477,10 +520,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> -	data->pdata = pdata;
> -	platform_set_drvdata(pdev, data);
> -	mutex_init(&data->lock);
> -
>  	ret = exynos_tmu_initialize(pdev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to initialize TMU\n");
> @@ -489,35 +528,54 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  
>  	exynos_tmu_control(pdev, true);
>  
> -	/* Register the sensor with thermal management interface */
> -	(&exynos_sensor_conf)->driver_data = data;
> -	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
> +	/* Allocate a structure to register with the exynos core thermal */
> +	sensor_conf = devm_kzalloc(&pdev->dev,
> +				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
> +	if (!sensor_conf) {
> +		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
> +		ret = -ENOMEM;
> +		goto err_clk;
> +	}
> +	sprintf(sensor_conf->name, "therm_zone%d", data->id);
> +	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
> +	sensor_conf->write_emul_temp =
> +		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> +	sensor_conf->driver_data = data;
> +	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
>  			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
>  			pdata->trigger_enable[3];
>  
> -	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++) {
> -		exynos_sensor_conf.trip_data.trip_val[i] =
> +	for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
> +		sensor_conf->trip_data.trip_val[i] =
>  			pdata->threshold + pdata->trigger_levels[i];
> -		exynos_sensor_conf.trip_data.trip_type[i] =
> +		sensor_conf->trip_data.trip_type[i] =
>  					pdata->trigger_type[i];
>  	}
>  
> -	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
> +	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
>  
> -	exynos_sensor_conf.cooling_data.freq_clip_count =
> -						pdata->freq_tab_count;
> +	sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
>  	for (i = 0; i < pdata->freq_tab_count; i++) {
> -		exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
> +		sensor_conf->cooling_data.freq_data[i].freq_clip_max =
>  					pdata->freq_tab[i].freq_clip_max;
> -		exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
> +		sensor_conf->cooling_data.freq_data[i].temp_level =
>  					pdata->freq_tab[i].temp_level;
>  	}
> -
> -	ret = exynos_register_thermal(&exynos_sensor_conf);
> +	sensor_conf->dev = &pdev->dev;
> +	/* Register the sensor with thermal management interface */
> +	ret = exynos_register_thermal(sensor_conf);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to register thermal interface\n");
>  		goto err_clk;
>  	}
> +	data->reg_conf = sensor_conf;
> +
> +	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
> +		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
> +		goto err_clk;
> +	}
>  
>  	return 0;
>  err_clk:
> @@ -531,7 +589,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>  
>  	exynos_tmu_control(pdev, false);
>  
> -	exynos_unregister_thermal(&exynos_sensor_conf);
> +	exynos_unregister_thermal(data->reg_conf);
>  
>  	clk_unprepare(data->clk);
>  
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index ef5dc0e..53fa702 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -250,4 +250,17 @@ struct exynos_tmu_platform_data {
>  	unsigned int freq_tab_count;
>  	const struct exynos_tmu_registers *registers;
>  };
> +
> +/**
> + * struct exynos_tmu_init_data
> + * @tmu_count: number of TMU instances.
> + * @tmu_data: platform data of all TMU instances.
> + * This structure is required to store data for multi-instance exynos tmu
> + * driver.
> + */
> +struct exynos_tmu_init_data {
> +	int tmu_count;
> +	struct exynos_tmu_platform_data tmu_data[];
> +};
> +
>  #endif /* _EXYNOS_TMU_H */
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 217b8f5..a5c25b4 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -48,38 +48,44 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
>  	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>  	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>  };
> -struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
> -	.threshold = 80,
> -	.trigger_levels[0] = 5,
> -	.trigger_levels[1] = 20,
> -	.trigger_levels[2] = 30,
> -	.trigger_enable[0] = true,
> -	.trigger_enable[1] = true,
> -	.trigger_enable[2] = true,
> -	.trigger_enable[3] = false,
> -	.trigger_type[0] = THROTTLE_ACTIVE,
> -	.trigger_type[1] = THROTTLE_ACTIVE,
> -	.trigger_type[2] = SW_TRIP,
> -	.max_trigger_level = 4,
> -	.gain = 15,
> -	.reference_voltage = 7,
> -	.cal_type = TYPE_ONE_POINT_TRIMMING,
> -	.min_efuse_value = 40,
> -	.max_efuse_value = 100,
> -	.first_point_trim = 25,
> -	.second_point_trim = 85,
> -	.default_temp_offset = 50,
> -	.freq_tab[0] = {
> -		.freq_clip_max = 800 * 1000,
> -		.temp_level = 85,
> -	},
> -	.freq_tab[1] = {
> -		.freq_clip_max = 200 * 1000,
> -		.temp_level = 100,
> +
> +struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
> +	.tmu_data = {
> +		{
> +		.threshold = 80,
> +		.trigger_levels[0] = 5,
> +		.trigger_levels[1] = 20,
> +		.trigger_levels[2] = 30,
> +		.trigger_enable[0] = true,
> +		.trigger_enable[1] = true,
> +		.trigger_enable[2] = true,
> +		.trigger_enable[3] = false,
> +		.trigger_type[0] = THROTTLE_ACTIVE,
> +		.trigger_type[1] = THROTTLE_ACTIVE,
> +		.trigger_type[2] = SW_TRIP,
> +		.max_trigger_level = 4,
> +		.gain = 15,
> +		.reference_voltage = 7,
> +		.cal_type = TYPE_ONE_POINT_TRIMMING,
> +		.min_efuse_value = 40,
> +		.max_efuse_value = 100,
> +		.first_point_trim = 25,
> +		.second_point_trim = 85,
> +		.default_temp_offset = 50,
> +		.freq_tab[0] = {
> +			.freq_clip_max = 800 * 1000,
> +			.temp_level = 85,
> +			},
> +		.freq_tab[1] = {
> +			.freq_clip_max = 200 * 1000,
> +			.temp_level = 100,
> +		},
> +		.freq_tab_count = 2,
> +		.type = SOC_ARCH_EXYNOS4210,
> +		.registers = &exynos4210_tmu_registers,
> +		},
>  	},
> -	.freq_tab_count = 2,
> -	.type = SOC_ARCH_EXYNOS4210,
> -	.registers = &exynos4210_tmu_registers,
> +	.tmu_count = 1,
>  };
>  #endif
>  
> @@ -120,41 +126,48 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
>  	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
>  	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
>  };
> -struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
> -	.threshold_falling = 10,
> -	.trigger_levels[0] = 85,
> -	.trigger_levels[1] = 103,
> -	.trigger_levels[2] = 110,
> -	.trigger_levels[3] = 120,
> -	.trigger_enable[0] = true,
> -	.trigger_enable[1] = true,
> -	.trigger_enable[2] = true,
> -	.trigger_enable[3] = false,
> -	.trigger_type[0] = THROTTLE_ACTIVE,
> -	.trigger_type[1] = THROTTLE_ACTIVE,
> -	.trigger_type[2] = SW_TRIP,
> -	.trigger_type[3] = HW_TRIP,
> -	.max_trigger_level = 4,
> -	.gain = 8,
> -	.reference_voltage = 16,
> -	.noise_cancel_mode = 4,
> -	.cal_type = TYPE_ONE_POINT_TRIMMING,
> -	.efuse_value = 55,
> -	.min_efuse_value = 40,
> -	.max_efuse_value = 100,
> -	.first_point_trim = 25,
> -	.second_point_trim = 85,
> -	.default_temp_offset = 50,
> -	.freq_tab[0] = {
> -		.freq_clip_max = 800 * 1000,
> -		.temp_level = 85,
> -	},
> -	.freq_tab[1] = {
> -		.freq_clip_max = 200 * 1000,
> -		.temp_level = 103,
> -	},
> -	.freq_tab_count = 2,
> -	.type = SOC_ARCH_EXYNOS,
> +
> +#define EXYNOS5250_TMU_DATA \
> +	.threshold_falling = 10, \
> +	.trigger_levels[0] = 85, \
> +	.trigger_levels[1] = 103, \
> +	.trigger_levels[2] = 110, \
> +	.trigger_levels[3] = 120, \
> +	.trigger_enable[0] = true, \
> +	.trigger_enable[1] = true, \
> +	.trigger_enable[2] = true, \
> +	.trigger_enable[3] = false, \
> +	.trigger_type[0] = THROTTLE_ACTIVE, \
> +	.trigger_type[1] = THROTTLE_ACTIVE, \
> +	.trigger_type[2] = SW_TRIP, \
> +	.trigger_type[3] = HW_TRIP, \
> +	.max_trigger_level = 4, \
> +	.gain = 8, \
> +	.reference_voltage = 16, \
> +	.noise_cancel_mode = 4, \
> +	.cal_type = TYPE_ONE_POINT_TRIMMING, \
> +	.efuse_value = 55, \
> +	.min_efuse_value = 40, \
> +	.max_efuse_value = 100, \
> +	.first_point_trim = 25, \
> +	.second_point_trim = 85, \
> +	.default_temp_offset = 50, \
> +	.freq_tab[0] = { \
> +		.freq_clip_max = 800 * 1000, \
> +		.temp_level = 85, \
> +	}, \
> +	.freq_tab[1] = { \
> +		.freq_clip_max = 200 * 1000, \
> +		.temp_level = 103, \
> +	}, \
> +	.freq_tab_count = 2, \
> +	.type = SOC_ARCH_EXYNOS, \
>  	.registers = &exynos5250_tmu_registers,
> +
> +struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
> +	.tmu_data = {
> +		{ EXYNOS5250_TMU_DATA },
> +	},
> +	.tmu_count = 1,
>  };
>  #endif
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 4acf070..139dbbb 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -94,14 +94,14 @@
>  #define EXYNOS_MAX_TRIGGER_PER_REG	4
>  
>  #if defined(CONFIG_CPU_EXYNOS4210)
> -extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
> +extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
>  #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>  #else
>  #define EXYNOS4210_TMU_DRV_DATA (NULL)
>  #endif
>  
>  #if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412))
> -extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data;
> +extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
>  #define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
>  #else
>  #define EXYNOS5250_TMU_DRV_DATA (NULL)
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

  reply	other threads:[~2013-06-24 15:50 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-24 10:50 [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-24 15:00   ` Eduardo Valentin
2013-06-24 15:00     ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-24 15:33   ` Eduardo Valentin
2013-06-24 15:33     ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-24 15:41   ` Eduardo Valentin
2013-06-24 15:41     ` Eduardo Valentin
2013-06-25  8:33     ` amit daniel kachhap
2013-06-25 11:39   ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:36     ` Eduardo Valentin
2013-06-25 13:36       ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-24 15:50   ` Eduardo Valentin [this message]
2013-06-24 15:50     ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-25 11:41   ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 21/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 22/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-24 19:43   ` Eduardo Valentin
2013-06-24 19:43     ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 23/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-24 16:37   ` Eduardo Valentin
2013-06-24 16:37     ` Eduardo Valentin
2013-06-26  1:24   ` Jungseok Lee
2013-08-07  9:53     ` Naveen Krishna Ch
2013-06-24 10:50 ` [PATCH V7 24/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 25/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-24 19:39   ` Eduardo Valentin
2013-06-24 19:39     ` Eduardo Valentin
2013-06-25  9:12     ` amit daniel kachhap
2013-06-25 11:46   ` [PATCH RESEND " Amit Daniel Kachhap
2013-06-25 13:38     ` Eduardo Valentin
2013-06-25 13:38       ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 26/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 27/30] ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-24 17:05   ` Eduardo Valentin
2013-06-24 17:05     ` Eduardo Valentin
2013-06-24 10:50 ` [PATCH V7 28/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-24 10:50 ` [PATCH V7 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-24 17:11   ` Eduardo Valentin
2013-06-24 17:11     ` Eduardo Valentin
2013-06-24 17:13 ` [PATCH V7 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Kukjin Kim
2013-06-24 19:51   ` Eduardo Valentin
2013-06-24 19:51     ` Eduardo Valentin
2013-06-25 11:53     ` amit daniel kachhap
2013-06-28  5:19       ` amit daniel kachhap
2013-06-28  5:30         ` Zhang, Rui
2013-07-08 23:13 ` Eduardo Valentin
2013-07-08 23:13   ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51C86ADB.50207@ti.com \
    --to=eduardo.valentin@ti.com \
    --cc=amit.daniel@samsung.com \
    --cc=amit.kachhap@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.