* [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-18 8:15 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-18 8:15 UTC (permalink / raw)
To: Paul Mackerras, Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-kernel, Hanjun Guo, jiang.liu, Yijing Wang, linux-fbdev
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
---
drivers/video/aty/aty128fb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 8c55011..a4dfe8c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
aty128_init_engine(par);
- par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ par->pm_reg = pdev->pm_cap;
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-18 8:15 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-18 8:15 UTC (permalink / raw)
To: Paul Mackerras, Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-kernel, Hanjun Guo, jiang.liu, Yijing Wang, linux-fbdev
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
---
drivers/video/aty/aty128fb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 8c55011..a4dfe8c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
aty128_init_engine(par);
- par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ par->pm_reg = pdev->pm_cap;
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
2013-06-18 8:15 ` Yijing Wang
@ 2013-06-25 12:06 ` Yijing Wang
-1 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-25 12:06 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard
Cc: Yijing Wang, Paul Mackerras, Tomi Valkeinen, linux-kernel,
linux-fbdev
Ping.....?
On 2013/6/18 16:15, Yijing Wang wrote:
> Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
> in init path. So we can use pdev->pm_cap instead of using
> pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> ---
> drivers/video/aty/aty128fb.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
> index 8c55011..a4dfe8c 100644
> --- a/drivers/video/aty/aty128fb.c
> +++ b/drivers/video/aty/aty128fb.c
> @@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> aty128_init_engine(par);
>
> - par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
> + par->pm_reg = pdev->pm_cap;
> par->pdev = pdev;
> par->asleep = 0;
> par->lock_blank = 0;
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-25 12:06 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-25 12:06 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard
Cc: Yijing Wang, Paul Mackerras, Tomi Valkeinen, linux-kernel,
linux-fbdev
Ping.....?
On 2013/6/18 16:15, Yijing Wang wrote:
> Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
> in init path. So we can use pdev->pm_cap instead of using
> pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> ---
> drivers/video/aty/aty128fb.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
> index 8c55011..a4dfe8c 100644
> --- a/drivers/video/aty/aty128fb.c
> +++ b/drivers/video/aty/aty128fb.c
> @@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> aty128_init_engine(par);
>
> - par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
> + par->pm_reg = pdev->pm_cap;
> par->pdev = pdev;
> par->asleep = 0;
> par->lock_blank = 0;
>
--
Thanks!
Yijing
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-26 1:13 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-26 1:13 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Yijing Wang, Paul Mackerras,
Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
---
drivers/video/aty/aty128fb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 8c55011..a4dfe8c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
aty128_init_engine(par);
- par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ par->pm_reg = pdev->pm_cap;
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
@ 2013-06-26 1:13 ` Yijing Wang
0 siblings, 0 replies; 6+ messages in thread
From: Yijing Wang @ 2013-06-26 1:13 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Yijing Wang, Paul Mackerras,
Jean-Christophe Plagniol-Villard, Tomi Valkeinen, linux-fbdev
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
---
drivers/video/aty/aty128fb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 8c55011..a4dfe8c 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
aty128_init_engine(par);
- par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ par->pm_reg = pdev->pm_cap;
par->pdev = pdev;
par->asleep = 0;
par->lock_blank = 0;
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-26 1:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-18 8:15 [PATCH 3/9] aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) Yijing Wang
2013-06-18 8:15 ` Yijing Wang
2013-06-25 12:06 ` Yijing Wang
2013-06-25 12:06 ` Yijing Wang
2013-06-26 1:13 ` Yijing Wang
2013-06-26 1:13 ` Yijing Wang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.