run commands after installation

run commands after installation

[Katu Txakur]

[-- Attachment #1: Type: text/plain, Size: 295 bytes --]

Hi,

I want to create a user after adding the snmp recipe. The command to do
that is:

net-snmp-config --create-snmpv3-user -a "my_password" myuser

What's the best way to do it? I have tried from do_install_append and also
from ROOTFS_POSTPROCESS_COMMAND but no luck so far.

Thanks

[-- Attachment #2: Type: text/html, Size: 529 bytes --]

Re: run commands after installation

[Tomas Frydrych]

On 26/06/13 15:32, Katu Txakur wrote:
> I want to create a user after adding the snmp recipe. The command to do
> that is:
> 
> net-snmp-config --create-snmpv3-user -a "my_password" myuser
> 
> What's the best way to do it? I have tried from do_install_append and
> also from ROOTFS_POSTPROCESS_COMMAND but no luck so far.

You need a postinst script for that sort of a thing.

Tomas

-- 
http://sleepfive.com

Re: run commands after installation

[Gaurang Shastri]

[-- Attachment #1: Type: text/plain, Size: 889 bytes --]

Hi,

You need to do something like below:

pkg_postinst() {
net-snmp-config --create-snmpv3-user -a "my_password" myuser
}

try with above and it should work :)

//Gaurang Shastri




On Wed, Jun 26, 2013 at 9:07 PM, Tomas Frydrych <tf+lists.yocto@r-finger.com
> wrote:

> On 26/06/13 15:32, Katu Txakur wrote:
> > I want to create a user after adding the snmp recipe. The command to do
> > that is:
> >
> > net-snmp-config --create-snmpv3-user -a "my_password" myuser
> >
> > What's the best way to do it? I have tried from do_install_append and
> > also from ROOTFS_POSTPROCESS_COMMAND but no luck so far.
>
> You need a postinst script for that sort of a thing.
>
> Tomas
>
> --
> http://sleepfive.com
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>

[-- Attachment #2: Type: text/html, Size: 1644 bytes --]

Re: run commands after installation

[Nicolas Dechesne]

[-- Attachment #1: Type: text/plain, Size: 583 bytes --]

On Thu, Jun 27, 2013 at 8:38 AM, Gaurang Shastri <gmshastri@gmail.com>wrote:

> Hi,
>
> You need to do something like below:
>
> pkg_postinst() {
>
> net-snmp-config --create-snmpv3-user -a "my_password" myuser
> }
>
> try with above and it should work :)
>

note it should be

pkg_postinst_PACKAGENAME(), so in most cases: pkg_postinst_${PN}()

also, see:

http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#post-installation-scripts
http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#usingpoky-extend-addpkg-postinstalls

[-- Attachment #2: Type: text/html, Size: 1492 bytes --]

Re: run commands after installation

[Katu Txakur]

[-- Attachment #1: Type: text/plain, Size: 813 bytes --]

Thanks Tomas, it was as easy as

pkg_postinst_${PN} () {
     #!/bin/sh -e
     net-snmp-config --create-snmpv3-user -a "my_password" myuser
}



2013/6/26 Tomas Frydrych <tf+lists.yocto@r-finger.com>

> On 26/06/13 15:32, Katu Txakur wrote:
> > I want to create a user after adding the snmp recipe. The command to do
> > that is:
> >
> > net-snmp-config --create-snmpv3-user -a "my_password" myuser
> >
> > What's the best way to do it? I have tried from do_install_append and
> > also from ROOTFS_POSTPROCESS_COMMAND but no luck so far.
>
> You need a postinst script for that sort of a thing.
>
> Tomas
>
> --
> http://sleepfive.com
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>

[-- Attachment #2: Type: text/html, Size: 1553 bytes --]