From: voice.shen@atmel.com (Bo Shen)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry
Date: Tue, 2 Jul 2013 11:05:10 +0800 [thread overview]
Message-ID: <51D24366.5000101@atmel.com> (raw)
In-Reply-To: <1372667978-4718-4-git-send-email-richard.genoud@gmail.com>
Hi Richard,
On 7/1/2013 16:39, Richard Genoud wrote:
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
> ---
> arch/arm/mach-at91/at91sam9x5.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
> index 2abee66..191eb4b 100644
> --- a/arch/arm/mach-at91/at91sam9x5.c
> +++ b/arch/arm/mach-at91/at91sam9x5.c
> @@ -233,6 +233,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
> + CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc_clk),
Actually, we don't use this anymore. Am I right?
> CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
> CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
> CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
>
Best Regards,
Bo Shen
WARNING: multiple messages have this Message-ID (diff)
From: Bo Shen <voice.shen@atmel.com>
To: Richard Genoud <richard.genoud@gmail.com>
Cc: devicetree-discuss@lists.ozlabs.org,
"Nicolas Ferre" <nicolas.ferre@atmel.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: Re: [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry
Date: Tue, 2 Jul 2013 11:05:10 +0800 [thread overview]
Message-ID: <51D24366.5000101@atmel.com> (raw)
In-Reply-To: <1372667978-4718-4-git-send-email-richard.genoud@gmail.com>
Hi Richard,
On 7/1/2013 16:39, Richard Genoud wrote:
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
> ---
> arch/arm/mach-at91/at91sam9x5.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
> index 2abee66..191eb4b 100644
> --- a/arch/arm/mach-at91/at91sam9x5.c
> +++ b/arch/arm/mach-at91/at91sam9x5.c
> @@ -233,6 +233,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
> CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
> CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
> + CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc_clk),
Actually, we don't use this anymore. Am I right?
> CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
> CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
> CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
>
Best Regards,
Bo Shen
next prev parent reply other threads:[~2013-07-02 3:05 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 8:39 [RFC PATCH 00/13] audio support for at91sam9x5ek board Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 01/13] misc: atmel_ssc: add device tree DMA support Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-02 3:01 ` Bo Shen
2013-07-02 3:01 ` Bo Shen
2013-07-02 8:13 ` Richard Genoud
2013-07-02 8:13 ` Richard Genoud
2013-07-02 9:11 ` Bo Shen
2013-07-02 9:11 ` Bo Shen
2013-07-03 12:21 ` Richard Genoud
2013-07-03 12:21 ` Richard Genoud
2013-07-03 15:51 ` Richard Genoud
2013-07-03 15:51 ` Richard Genoud
2013-07-04 1:15 ` Bo Shen
2013-07-04 1:15 ` Bo Shen
2013-07-04 13:44 ` Richard Genoud
2013-07-04 13:44 ` Richard Genoud
2013-07-04 13:44 ` Richard Genoud
2013-07-05 1:25 ` Bo Shen
2013-07-05 1:25 ` Bo Shen
2013-07-05 7:16 ` Richard Genoud
2013-07-05 7:16 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 02/13] misc: atmel_ssc: keep the count of pdev->id Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-02 3:03 ` Bo Shen
2013-07-02 3:03 ` Bo Shen
2013-07-05 15:16 ` Richard Genoud
2013-07-05 15:16 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 03/13] ARM: at91: DTS: sam9x5: add clock for SSC DT entry Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-02 3:05 ` Bo Shen [this message]
2013-07-02 3:05 ` Bo Shen
2013-07-05 15:16 ` Richard Genoud
2013-07-05 15:16 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 04/13] ARM: at91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 05/13] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 06/13] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 07/13] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 08/13] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-02 3:21 ` Bo Shen
2013-07-02 3:21 ` Bo Shen
2013-07-05 15:15 ` Richard Genoud
2013-07-05 15:15 ` Richard Genoud
2013-07-05 18:06 ` Mark Brown
2013-07-05 18:06 ` Mark Brown
2013-07-05 18:06 ` Mark Brown
2013-07-05 18:12 ` Richard Genoud
2013-07-05 18:12 ` Richard Genoud
2013-07-08 2:01 ` Bo Shen
2013-07-08 2:01 ` Bo Shen
2013-07-08 7:55 ` Richard Genoud
2013-07-08 7:55 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 09/13] sound: atmel-pcm: don't return ok if pcm-dma is not implemented Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 10/13] sound: atmel_ssc_dai: PM: actually stopping clock on suspend/resume Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 11/13] sound: atmel-pcm-dma: check pointer before dereference Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 12/13] sound: wm8731: rework power management Richard Genoud
2013-07-01 8:39 ` Richard Genoud
2013-07-01 8:39 ` [RFC PATCH 13/13] sound: codec: wm8371: correct capture line/mic Richard Genoud
2013-07-01 8:39 ` Richard Genoud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D24366.5000101@atmel.com \
--to=voice.shen@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.