From: Hongbo Zhang <hongbo.zhang@freescale.com>
To: <hongbo.zhang@freescale.com>
Cc: vinod.koul@intel.com, devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, vakul@freescale.com, djbw@fb.com,
scottwood@freescale.com, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
Date: Wed, 3 Jul 2013 11:53:20 +0800 [thread overview]
Message-ID: <51D3A030.4020608@freescale.com> (raw)
In-Reply-To: <1372650378-2936-1-git-send-email-hongbo.zhang@freescale.com>
hmm...add the devicetree-discuss@lists.ozlabs.org into list.
Note that we are discussing a better naming for this new compatible
property in the corresponding [PATCH 2/2], so I will resend a v2 of this
patch.
On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
> 3 files changed, 182 insertions(+), 2 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> new file mode 100644
> index 0000000..c626c49
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma0: dma@100300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x100300 0x4 0x100600 0x4>;
> + ranges = <0x0 0x100100 0x500>;
> + cell-index = <0>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <28 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <29 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <30 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <31 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <76 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <77 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <78 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <79 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> new file mode 100644
> index 0000000..980ea77
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma1: dma@101300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x101300 0x4 0x101600 0x4>;
> + ranges = <0x0 0x101100 0x500>;
> + cell-index = <1>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <32 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <33 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <34 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <35 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <80 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <81 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <82 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <83 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index bd611a9..7d8bac6 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -387,8 +387,8 @@
> reg = <0xea000 0x4000>;
> };
>
> -/include/ "qoriq-dma-0.dtsi"
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "qoriq-dma2-0.dtsi"
> +/include/ "qoriq-dma2-1.dtsi"
>
> /include/ "qoriq-espi-0.dtsi"
> spi@110000 {
WARNING: multiple messages have this Message-ID (diff)
From: Hongbo Zhang <hongbo.zhang@freescale.com>
To: hongbo.zhang@freescale.com
Cc: vinod.koul@intel.com, djbw@fb.com, scottwood@freescale.com,
vakul@freescale.com, leoLi@freescale.com,
linux-kernel@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
Date: Wed, 3 Jul 2013 11:53:20 +0800 [thread overview]
Message-ID: <51D3A030.4020608@freescale.com> (raw)
In-Reply-To: <1372650378-2936-1-git-send-email-hongbo.zhang@freescale.com>
hmm...add the devicetree-discuss@lists.ozlabs.org into list.
Note that we are discussing a better naming for this new compatible
property in the corresponding [PATCH 2/2], so I will resend a v2 of this
patch.
On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
> 3 files changed, 182 insertions(+), 2 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> new file mode 100644
> index 0000000..c626c49
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma0: dma@100300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x100300 0x4 0x100600 0x4>;
> + ranges = <0x0 0x100100 0x500>;
> + cell-index = <0>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <28 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <29 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <30 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <31 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <76 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <77 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <78 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <79 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> new file mode 100644
> index 0000000..980ea77
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma1: dma@101300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x101300 0x4 0x101600 0x4>;
> + ranges = <0x0 0x101100 0x500>;
> + cell-index = <1>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <32 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <33 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <34 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <35 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <80 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <81 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <82 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <83 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index bd611a9..7d8bac6 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -387,8 +387,8 @@
> reg = <0xea000 0x4000>;
> };
>
> -/include/ "qoriq-dma-0.dtsi"
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "qoriq-dma2-0.dtsi"
> +/include/ "qoriq-dma2-1.dtsi"
>
> /include/ "qoriq-espi-0.dtsi"
> spi@110000 {
WARNING: multiple messages have this Message-ID (diff)
From: Hongbo Zhang <hongbo.zhang@freescale.com>
To: <hongbo.zhang@freescale.com>
Cc: <vinod.koul@intel.com>, <djbw@fb.com>, <scottwood@freescale.com>,
<vakul@freescale.com>, <leoLi@freescale.com>,
<linux-kernel@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>,
<linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
Date: Wed, 3 Jul 2013 11:53:20 +0800 [thread overview]
Message-ID: <51D3A030.4020608@freescale.com> (raw)
In-Reply-To: <1372650378-2936-1-git-send-email-hongbo.zhang@freescale.com>
hmm...add the devicetree-discuss@lists.ozlabs.org into list.
Note that we are discussing a better naming for this new compatible
property in the corresponding [PATCH 2/2], so I will resend a v2 of this
patch.
On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi | 90 +++++++++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
> 3 files changed, 182 insertions(+), 2 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> new file mode 100644
> index 0000000..c626c49
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma0: dma@100300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x100300 0x4 0x100600 0x4>;
> + ranges = <0x0 0x100100 0x500>;
> + cell-index = <0>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <28 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <29 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <30 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <31 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <76 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <77 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <78 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <79 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> new file mode 100644
> index 0000000..980ea77
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * * Neither the name of Freescale Semiconductor nor the
> + * names of its contributors may be used to endorse or promote products
> + * derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma1: dma@101300 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,eloplus-dma2";
> + reg = <0x101300 0x4 0x101600 0x4>;
> + ranges = <0x0 0x101100 0x500>;
> + cell-index = <1>;
> + dma-channel@0 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x0 0x80>;
> + cell-index = <0>;
> + interrupts = <32 2 0 0>;
> + };
> + dma-channel@80 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x80 0x80>;
> + cell-index = <1>;
> + interrupts = <33 2 0 0>;
> + };
> + dma-channel@100 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x100 0x80>;
> + cell-index = <2>;
> + interrupts = <34 2 0 0>;
> + };
> + dma-channel@180 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x180 0x80>;
> + cell-index = <3>;
> + interrupts = <35 2 0 0>;
> + };
> + dma-channel@300 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x300 0x80>;
> + cell-index = <4>;
> + interrupts = <80 2 0 0>;
> + };
> + dma-channel@380 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x380 0x80>;
> + cell-index = <5>;
> + interrupts = <81 2 0 0>;
> + };
> + dma-channel@400 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x400 0x80>;
> + cell-index = <6>;
> + interrupts = <82 2 0 0>;
> + };
> + dma-channel@480 {
> + compatible = "fsl,eloplus-dma-channel";
> + reg = <0x480 0x80>;
> + cell-index = <7>;
> + interrupts = <83 2 0 0>;
> + };
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index bd611a9..7d8bac6 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -387,8 +387,8 @@
> reg = <0xea000 0x4000>;
> };
>
> -/include/ "qoriq-dma-0.dtsi"
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "qoriq-dma2-0.dtsi"
> +/include/ "qoriq-dma2-1.dtsi"
>
> /include/ "qoriq-espi-0.dtsi"
> spi@110000 {
next prev parent reply other threads:[~2013-07-03 3:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 3:46 [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes hongbo.zhang
2013-07-01 3:46 ` [PATCH 2/2] DMA: Freescale: update driver to support 8-channel DMA engine hongbo.zhang
2013-07-02 23:13 ` Scott Wood
2013-07-02 23:13 ` Scott Wood
2013-07-03 3:47 ` Hongbo Zhang
2013-07-03 3:47 ` Hongbo Zhang
2013-07-03 16:41 ` Scott Wood
2013-07-03 16:41 ` Scott Wood
2013-07-03 16:41 ` Scott Wood
2013-07-03 3:53 ` Hongbo Zhang [this message]
2013-07-03 3:53 ` [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes Hongbo Zhang
2013-07-03 3:53 ` Hongbo Zhang
2013-07-03 7:48 ` Hongbo Zhang
2013-07-03 7:48 ` Hongbo Zhang
2013-07-03 7:48 ` Hongbo Zhang
2013-07-03 19:02 ` Scott Wood
2013-07-03 19:02 ` Scott Wood
2013-07-03 19:02 ` Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2013-07-01 3:20 hongbo.zhang
2013-07-01 3:20 ` hongbo.zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D3A030.4020608@freescale.com \
--to=hongbo.zhang@freescale.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=djbw@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scottwood@freescale.com \
--cc=vakul@freescale.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.