NSA310 + DT

[tibor@harsszegi.com (Tibor Harsszegi)]

Cool, keep you posted.
> On Wed, Jul 10, 2013 at 06:40:43PM +0200, Tibor Harsszegi wrote:
>> Hello Andrew,
>>
>> I did a:
>>
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make clean
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make kirkwood_defconfig
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make zImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make dtbs
>> cat arch/arm/boot/zImage arch/arm/boot/dts/kirkwood-nsa310-tdc.dtb > /tmp/X
>> mv /tmp/X arch/arm/boot/zImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make uImage
>> ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make modules
>>
>> [attached .config]
>>
>> copied the uImage over the NSA310, rebooted.
>> Good news: console is back
> Great. Probably was OF_SERIAL_PLATFORM
>
>> Bad news: LEDs still don't work (all green), kernel stops (tried
>> forcing rootfstype=ext4, didn't help)
> Ah, O.k. EXT4 is not part of kirkwood_defconfig. Hence it cannot mount
> the root fs.
>
> Please could you use make menuconfig and include it into the kernel
> image. I will also update the patch later.
>
> LEDs are not working because the GPIO driver is not loading.
> I will see if i can spot an obvious typo etc.
>
>    Andrew