NSA310 + DT

[finn@uni-bremen.de (Finn Hoffmann)]

Am 01.08.2013 18:04, schrieb Andrew Lunn:
>> The LED's on after kernel is loaded, while starting up does not work.
>>             pmx_led_sys_green: pmx-led-sys-green {
>>                  marvell,pins = "mpp28";
>>                  marvell,function = "gpio";
>>                  linux,default-trigger = "heartbeat";
>>                  brightness = <255>;
>>              };
>> I first tried default-trigger, then I added brightness additionally
>> but LED's wont turn on.
> Can you manually turn the LED on, using /sys/class/led/.../brightness?
> It could be we have the wrong GPIO line for the led. It would be good
> if you could test them all, not just this one led.
>
All LED's work via brightness and trigger default-on.
>> There is no sata hdd trigger and nand-disk does not trigger on sata
>> hdd activity.
> They are out of tree patches. There was some discussion about SATA led
> activity maybe 6 to 9 months ago. Maybe you can see why the suggested
> patches got rejected. If i remember correctly, it was because they are
> in the hot path.
>
>     Andrew
On a quick look I have not found it but it is not that important for me.

Finn