* Error Compiling Xen-unstable Changeset 26004
@ 2013-07-12 18:06 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-12 18:06 UTC (permalink / raw)
To: xen-devel@lists.xen.org, Ian Campbell, Konrad Rzeszutek Wilk,
Teo En Ming (Zhang Enming)
Dear Ian and Konrad,
I encountered an error when compiling Xen-unstable changeset 26004.
The error is reproduced as follows:
/usr/bin/ld: vl.o: undefined reference to symbol
'timer_settime@@GLIBC_2.3.3'
/usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
/lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker command line
/lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[5]: *** [qemu-dm] Error 1
make[5]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote/i386-dm'
make[4]: *** [subdir-i386-dm] Error 2
make[4]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote'
make[3]: *** [subdir-install-qemu-xen-traditional-dir] Error 2
make[3]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
make[2]: *** [subdirs-install] Error 2
make[2]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
make[1]: *** [install-tools] Error 2
make[1]: Leaving directory
`/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough'
make: *** [world] Error 2
How do I solve this problem?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-12 18:06 Error Compiling Xen-unstable Changeset 26004 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 9:45 ` Ian Campbell
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 5:32 UTC (permalink / raw)
To: singapore.mr.teo.en.ming; +Cc: Ian Campbell, xen-devel@lists.xen.org
On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> Dear Ian and Konrad,
>
> I encountered an error when compiling Xen-unstable changeset 26004.
>
> The error is reproduced as follows:
>
> /usr/bin/ld: vl.o: undefined reference to symbol
> 'timer_settime@@GLIBC_2.3.3'
> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> command line
> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> operation
> collect2: error: ld returned 1 exit status
> make[5]: *** [qemu-dm] Error 1
> make[5]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote/i386-dm'
> make[4]: *** [subdir-i386-dm] Error 2
> make[4]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools/qemu-xen-traditional-dir-remote'
> make[3]: *** [subdir-install-qemu-xen-traditional-dir] Error 2
> make[3]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
> make[2]: *** [subdirs-install] Error 2
> make[2]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough/tools'
> make[1]: *** [install-tools] Error 2
> make[1]: Leaving directory
> `/home/teo-en-ming/xen-unstable.hg-cs26004-vga-passthrough'
> make: *** [world] Error 2
>
> How do I solve this problem?
>
> Thank you very much.
>
Dear Ian and Konrad,
Please help me solve this problem.
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 9:45 ` Ian Campbell
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Ian Campbell @ 2013-07-13 9:45 UTC (permalink / raw)
To: singapore.mr.teo.en.ming; +Cc: xen-devel@lists.xen.org
On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
(Zhang Enming) wrote:
> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
Please wait more than half a day before sending ping messages. You
should give it at least one or two *working* days.
> > Dear Ian and Konrad,
> >
> > I encountered an error when compiling Xen-unstable changeset 26004.
This is very old, from about nine months ago. Please either run a stable
release or keep more up to date with xen unstable.
> > The error is reproduced as follows:
> >
> > /usr/bin/ld: vl.o: undefined reference to symbol
> > 'timer_settime@@GLIBC_2.3.3'
> > /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> > /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> > command line
> > /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> > operation
> > collect2: error: ld returned 1 exit status
This was fixed by commit 70992304dc8c to the qemu-xen-traditional
tree.
Ian.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 9:45 ` Ian Campbell
@ 2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 13:00 ` Pasi Kärkkäinen
0 siblings, 1 reply; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 10:33 UTC (permalink / raw)
To: Ian Campbell; +Cc: Teo En Ming (Zhang Enming), xen-devel@lists.xen.org
On 13/07/2013 17:45, Ian Campbell wrote:
> On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
> (Zhang Enming) wrote:
>> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> Please wait more than half a day before sending ping messages. You
> should give it at least one or two *working* days.
>
>>> Dear Ian and Konrad,
>>>
>>> I encountered an error when compiling Xen-unstable changeset 26004.
> This is very old, from about nine months ago. Please either run a stable
> release or keep more up to date with xen unstable.
>
>>> The error is reproduced as follows:
>>>
>>> /usr/bin/ld: vl.o: undefined reference to symbol
>>> 'timer_settime@@GLIBC_2.3.3'
>>> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
>>> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
>>> command line
>>> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
>>> operation
>>> collect2: error: ld returned 1 exit status
> This was fixed by commit 70992304dc8c to the qemu-xen-traditional
> tree.
>
> Ian.
>
>
Dear Ian,
If I still wanted to use changeset 26004 (for reasons of VGA
passthrough), how should I overcome the problem as stated above?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
@ 2013-07-13 13:00 ` Pasi Kärkkäinen
2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 6+ messages in thread
From: Pasi Kärkkäinen @ 2013-07-13 13:00 UTC (permalink / raw)
To: Singapore Citizen Mr. Teo En Ming (Zhang Enming)
Cc: Ian Campbell, xen-devel@lists.xen.org
On Sat, Jul 13, 2013 at 06:33:04PM +0800, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> On 13/07/2013 17:45, Ian Campbell wrote:
> >On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
> >(Zhang Enming) wrote:
> >>On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
> >Please wait more than half a day before sending ping messages. You
> >should give it at least one or two *working* days.
> >
> >>>Dear Ian and Konrad,
> >>>
> >>>I encountered an error when compiling Xen-unstable changeset 26004.
> >This is very old, from about nine months ago. Please either run a stable
> >release or keep more up to date with xen unstable.
> >
> >>>The error is reproduced as follows:
> >>>
> >>>/usr/bin/ld: vl.o: undefined reference to symbol
> >>>'timer_settime@@GLIBC_2.3.3'
> >>>/usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
> >>>/lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
> >>>command line
> >>>/lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
> >>>operation
> >>>collect2: error: ld returned 1 exit status
> >This was fixed by commit 70992304dc8c to the qemu-xen-traditional
> >tree.
> >
> >Ian.
> >
> >
>
> Dear Ian,
>
> If I still wanted to use changeset 26004 (for reasons of VGA
> passthrough), how should I overcome the problem as stated above?
>
> Thank you very much.
>
You fix it by applying the patch from commit 70992304dc8c, as stated above.
-- Pasi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error Compiling Xen-unstable Changeset 26004
2013-07-13 13:00 ` Pasi Kärkkäinen
@ 2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 6+ messages in thread
From: Singapore Citizen Mr. Teo En Ming (Zhang Enming) @ 2013-07-13 13:08 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: Ian Campbell, xen-devel@lists.xen.org
On 13/07/2013 21:00, Pasi Kärkkäinen wrote:
> On Sat, Jul 13, 2013 at 06:33:04PM +0800, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
>> On 13/07/2013 17:45, Ian Campbell wrote:
>>> On Sat, 2013-07-13 at 13:32 +0800, Singapore Citizen Mr. Teo En Ming
>>> (Zhang Enming) wrote:
>>>> On 13/07/2013 02:06, Singapore Citizen Mr. Teo En Ming (Zhang Enming) wrote:
>>> Please wait more than half a day before sending ping messages. You
>>> should give it at least one or two *working* days.
>>>
>>>>> Dear Ian and Konrad,
>>>>>
>>>>> I encountered an error when compiling Xen-unstable changeset 26004.
>>> This is very old, from about nine months ago. Please either run a stable
>>> release or keep more up to date with xen unstable.
>>>
>>>>> The error is reproduced as follows:
>>>>>
>>>>> /usr/bin/ld: vl.o: undefined reference to symbol
>>>>> 'timer_settime@@GLIBC_2.3.3'
>>>>> /usr/bin/ld: note: 'timer_settime@@GLIBC_2.3.3' is defined in DSO
>>>>> /lib/x86_64-linux-gnu/librt.so.1 so try adding it to the linker
>>>>> command line
>>>>> /lib/x86_64-linux-gnu/librt.so.1: could not read symbols: Invalid
>>>>> operation
>>>>> collect2: error: ld returned 1 exit status
>>> This was fixed by commit 70992304dc8c to the qemu-xen-traditional
>>> tree.
>>>
>>> Ian.
>>>
>>>
>> Dear Ian,
>>
>> If I still wanted to use changeset 26004 (for reasons of VGA
>> passthrough), how should I overcome the problem as stated above?
>>
>> Thank you very much.
>>
> You fix it by applying the patch from commit 70992304dc8c, as stated above.
>
> -- Pasi
>
>
Dear Pasi,
How do I do that? Could you list out the steps?
Thank you very much.
--
Yours sincerely,
Singapore Citizen Mr. Teo En Ming (Zhang Enming)
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-07-13 13:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-12 18:06 Error Compiling Xen-unstable Changeset 26004 Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 5:32 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 9:45 ` Ian Campbell
2013-07-13 10:33 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
2013-07-13 13:00 ` Pasi Kärkkäinen
2013-07-13 13:08 ` Singapore Citizen Mr. Teo En Ming (Zhang Enming)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.