Re: Regression 3.11-rc1: omap4panda: no usb and consequently no ethernet

["Arend van Spriel" <arend@broadcom.com>]

On 07/18/2013 10:59 AM, Tony Lindgren wrote:
> * Arend van Spriel <arend@broadcom.com> [130718 01:47]:
>> So my first step was to follow the recipe given in that commit.
>> Beside that I noticed a thread about USB issue on LKML so I also
>> applied the following commit:
>>
>> commit 352f573e59050c7a604c35c58b4bbfc51edebbee
>> Author: Roger Quadros <rogerq@ti.com>
>> Date:   Tue Jun 18 19:04:47 2013 +0300
>>
>>      ARM: OMAP2+: Provide alias to USB PHY clock
>>
>> The attached kernel log seems to suggest that the device tree is
>> picked up by the kernel, but the USB does not seem very active. No
>> ethernet connectivity. This does seem a regression to me. Is there
>> some other patch that I need to get it going again?
>
> There are few .dts related patches missing for USB. Roger can
> point you to the current versions that Benoit should be queueing
> for the -rc series.

Hope Roger or Benoit will chime in.

> Then for the SDIO with device tree, take a look at the following
> patches:
>
> [PATCH 0/3] WLAN support for omap4 when booted with devicetree
> http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#
>
> The wl12xx .dts changes for pandaboard are still missing too.
>
> Then I'll be updating these soonish:
> [PATCH 0/4] Updated omap_hsmmc SDIO and remuxing patches
>
> Those are needed for the SDIO interrupt, SDIO will work also
> without those.

Thanks for the pointers,

Arend