From: Gururaja Hebbar <gururaja.hebbar-l0cyMroinI0@public.gmane.org>
To: benoit.cousson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
benoit.cousson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
vaibhav.bedia-l0cyMroinI0@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [Patch V2 4/4] ARM: dts: AM33XX: update rtc node compatibility
Date: Tue, 30 Jul 2013 10:35:52 +0530 [thread overview]
Message-ID: <51F749B0.7020802@ti.com> (raw)
In-Reply-To: <1372841225-18813-5-git-send-email-gururaja.hebbar-l0cyMroinI0@public.gmane.org>
Hi,
On 7/3/2013 2:17 PM, Hebbar Gururaja wrote:
> Since AM33xx RTC IP has RTC_IRQWAKEEN to support Alarm Wake-up.
>
> Update the rtc compatible property to "ti,am3352-rtc" to enable handling
> of this feature inside rtc-omap driver.
The other 2 rtc driver related patches have been pulled up. If you have
no comments, can you please pull this up.
Regards
Gururaja
>
> Signed-off-by: Hebbar Gururaja <gururaja.hebbar-l0cyMroinI0@public.gmane.org>
> ---
> :100644 100644 77aa1b0... dde180a... M arch/arm/boot/dts/am33xx.dtsi
> arch/arm/boot/dts/am33xx.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 77aa1b0..dde180a 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -297,7 +297,7 @@
> };
>
> rtc@44e3e000 {
> - compatible = "ti,da830-rtc";
> + compatible = "ti,am3352-rtc";
> reg = <0x44e3e000 0x1000>;
> interrupts = <75
> 76>;
>
WARNING: multiple messages have this Message-ID (diff)
From: gururaja.hebbar@ti.com (Gururaja Hebbar)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch V2 4/4] ARM: dts: AM33XX: update rtc node compatibility
Date: Tue, 30 Jul 2013 10:35:52 +0530 [thread overview]
Message-ID: <51F749B0.7020802@ti.com> (raw)
In-Reply-To: <1372841225-18813-5-git-send-email-gururaja.hebbar@ti.com>
Hi,
On 7/3/2013 2:17 PM, Hebbar Gururaja wrote:
> Since AM33xx RTC IP has RTC_IRQWAKEEN to support Alarm Wake-up.
>
> Update the rtc compatible property to "ti,am3352-rtc" to enable handling
> of this feature inside rtc-omap driver.
The other 2 rtc driver related patches have been pulled up. If you have
no comments, can you please pull this up.
Regards
Gururaja
>
> Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
> ---
> :100644 100644 77aa1b0... dde180a... M arch/arm/boot/dts/am33xx.dtsi
> arch/arm/boot/dts/am33xx.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 77aa1b0..dde180a 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -297,7 +297,7 @@
> };
>
> rtc at 44e3e000 {
> - compatible = "ti,da830-rtc";
> + compatible = "ti,am3352-rtc";
> reg = <0x44e3e000 0x1000>;
> interrupts = <75
> 76>;
>
WARNING: multiple messages have this Message-ID (diff)
From: Gururaja Hebbar <gururaja.hebbar@ti.com>
To: <benoit.cousson@linaro.org>
Cc: <khilman@linaro.org>, <tony@atomide.com>,
<benoit.cousson@gmail.com>, <linux-omap@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<davinci-linux-open-source@linux.davincidsp.com>,
<vaibhav.bedia@ti.com>, <sudhakar.raj@ti.com>
Subject: Re: [Patch V2 4/4] ARM: dts: AM33XX: update rtc node compatibility
Date: Tue, 30 Jul 2013 10:35:52 +0530 [thread overview]
Message-ID: <51F749B0.7020802@ti.com> (raw)
In-Reply-To: <1372841225-18813-5-git-send-email-gururaja.hebbar@ti.com>
Hi,
On 7/3/2013 2:17 PM, Hebbar Gururaja wrote:
> Since AM33xx RTC IP has RTC_IRQWAKEEN to support Alarm Wake-up.
>
> Update the rtc compatible property to "ti,am3352-rtc" to enable handling
> of this feature inside rtc-omap driver.
The other 2 rtc driver related patches have been pulled up. If you have
no comments, can you please pull this up.
Regards
Gururaja
>
> Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
> ---
> :100644 100644 77aa1b0... dde180a... M arch/arm/boot/dts/am33xx.dtsi
> arch/arm/boot/dts/am33xx.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 77aa1b0..dde180a 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -297,7 +297,7 @@
> };
>
> rtc@44e3e000 {
> - compatible = "ti,da830-rtc";
> + compatible = "ti,am3352-rtc";
> reg = <0x44e3e000 0x1000>;
> interrupts = <75
> 76>;
>
next prev parent reply other threads:[~2013-07-30 5:05 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-03 8:47 [Patch V2 0/4] rtc: omap: handle rtc wakeup support in driver Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
[not found] ` <1372841225-18813-1-git-send-email-gururaja.hebbar-l0cyMroinI0@public.gmane.org>
2013-07-03 8:47 ` [Patch V2 1/4] rtc: omap: restore back (hard-code) wakeup support Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` [Patch V2 2/4] ARM: Davinci: da8xx/omap-l1: Remove hard coding of rtc device wakeup Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
[not found] ` <1372841225-18813-3-git-send-email-gururaja.hebbar-l0cyMroinI0@public.gmane.org>
2013-08-16 12:02 ` Sekhar Nori
2013-08-16 12:02 ` Sekhar Nori
2013-08-16 12:02 ` Sekhar Nori
2013-07-03 8:47 ` [Patch V2 3/4] rtc: omap: add rtc wakeup support to alarm events Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
[not found] ` <1372841225-18813-4-git-send-email-gururaja.hebbar-l0cyMroinI0@public.gmane.org>
2013-07-24 13:14 ` Gururaja Hebbar
2013-07-24 13:14 ` Gururaja Hebbar
2013-07-24 13:14 ` Gururaja Hebbar
2013-07-03 8:47 ` [Patch V2 4/4] ARM: dts: AM33XX: update rtc node compatibility Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
2013-07-03 8:47 ` Hebbar Gururaja
[not found] ` <1372841225-18813-5-git-send-email-gururaja.hebbar-l0cyMroinI0@public.gmane.org>
2013-07-30 5:05 ` Gururaja Hebbar [this message]
2013-07-30 5:05 ` Gururaja Hebbar
2013-07-30 5:05 ` Gururaja Hebbar
2013-07-30 14:55 ` Mark Rutland
2013-07-30 14:55 ` Mark Rutland
2013-07-30 14:55 ` Mark Rutland
[not found] ` <20130730145501.GA29859-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-07-30 16:21 ` Sekhar Nori
2013-07-30 16:21 ` Sekhar Nori
2013-07-30 16:21 ` Sekhar Nori
2013-08-01 17:05 ` Mark Rutland
2013-08-01 17:05 ` Mark Rutland
2013-08-01 17:05 ` Mark Rutland
[not found] ` <20130801170537.GF8095-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-08-02 11:07 ` Gururaja Hebbar
2013-08-02 11:07 ` Gururaja Hebbar
2013-08-02 11:07 ` Gururaja Hebbar
[not found] ` <51FB92F8.9020801-l0cyMroinI0@public.gmane.org>
2013-08-02 11:20 ` Mark Rutland
2013-08-02 11:20 ` Mark Rutland
2013-08-02 11:20 ` Mark Rutland
[not found] ` <20130802112018.GI2884-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-08-02 11:48 ` Gururaja Hebbar
2013-08-02 11:48 ` Gururaja Hebbar
2013-08-02 11:48 ` Gururaja Hebbar
2013-08-02 12:40 ` Mark Rutland
2013-08-02 12:40 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51F749B0.7020802@ti.com \
--to=gururaja.hebbar-l0cymroini0@public.gmane.org \
--cc=benoit.cousson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=benoit.cousson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
--cc=vaibhav.bedia-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.