* [ath9k-devel] Why Realtek instead of ath9K or carl9170??
@ 2013-07-30 15:14 Stanislav Komarov
2013-07-30 20:35 ` Oleksij Rempel
0 siblings, 1 reply; 3+ messages in thread
From: Stanislav Komarov @ 2013-07-30 15:14 UTC (permalink / raw)
To: ath9k-devel
Hi guys,
I have an issue when trying to use TP-Link TL-WN821 as AP(Infrastructure
Mode).
When I plug device to USB port I see in dmesg:
[ 223.959068] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 224.074513] usb 2-3: New USB device found, idVendor=0bda, idProduct=8178
[ 224.074528] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 224.074534] usb 2-3: Product: USB WLAN
[ 224.074539] usb 2-3: Manufacturer: 802.11n
[ 224.074549] usb 2-3: SerialNumber: 00e04c000001
[ 224.075802] rtl8192cu: Chip version 0x11
[ 224.119576] rtl8192cu: MAC address: a0:f3:c1:08:ba:a3
[ 224.119585] rtl8192cu: Board Type 0
[ 224.119793] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 224.119856] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[ 224.120198] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
[ 224.121622] rtlwifi: wireless switch is on
[ 224.222409] systemd-udevd[2045]: renamed network interface wlan0 to
wlp0s29f7u3
lsusb says:
Bus 002 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU
802.11n WLAN Adapter
lsmod:
ath9k_htc 65772 0
ath9k_common 13503 1 ath9k_htc
ath9k_hw 417147 2 ath9k_common,ath9k_htc
rtl8192cu 67684 0
rtlwifi 83065 1 rtl8192cu
rtl8192c_common 46137 1 rtl8192cu
rfcomm 68979 10
Checked ls /lib/firmware and yes,I have it by default
ar3k
ar5523.bin
ar7010_1_1.fw
ar7010.fw
ar9170-1.fw
ar9170-2.fw
ar9170.fw
ar9271.fw
Why is it Realtek?????????? I need to use it with hostapd which doesn't
support it as AP
Thank you very much for your time
--
*WBR,Stanislav Komarov *
E-Mail: st.komaroff at gmail.com
Skype: stkomaroff
ICQ: 113048692
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130730/912ace6e/attachment.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ath9k-devel] Why Realtek instead of ath9K or carl9170??
2013-07-30 15:14 [ath9k-devel] Why Realtek instead of ath9K or carl9170?? Stanislav Komarov
@ 2013-07-30 20:35 ` Oleksij Rempel
2013-07-30 21:10 ` Stanislav Komarov
0 siblings, 1 reply; 3+ messages in thread
From: Oleksij Rempel @ 2013-07-30 20:35 UTC (permalink / raw)
To: ath9k-devel
Hi Stanislav,
Am 30.07.2013 17:14, schrieb Stanislav Komarov:
> Hi guys,
>
> I have an issue when trying to use TP-Link TL-WN821 as AP(Infrastructure
> Mode).
>
> When I plug device to USB port I see in dmesg:
>
> [ 223.959068] usb 2-3: new high-speed USB device number 4 using ehci-pci
> [ 224.074513] usb 2-3: New USB device found, idVendor=0bda, idProduct=8178
> [ 224.074528] usb 2-3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 224.074534] usb 2-3: Product: USB WLAN
> [ 224.074539] usb 2-3: Manufacturer: 802.11n
> [ 224.074549] usb 2-3: SerialNumber: 00e04c000001
> [ 224.075802] rtl8192cu: Chip version 0x11
> [ 224.119576] rtl8192cu: MAC address: a0:f3:c1:08:ba:a3
> [ 224.119585] rtl8192cu: Board Type 0
> [ 224.119793] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
> [ 224.119856] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
> [ 224.120198] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
> [ 224.121622] rtlwifi: wireless switch is on
> [ 224.222409] systemd-udevd[2045]: renamed network interface wlan0 to
> wlp0s29f7u3
>
> lsusb says:
> Bus 002 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU
> 802.11n WLAN Adapter
>
> lsmod:
>
> ath9k_htc 65772 0
> ath9k_common 13503 1 ath9k_htc
> ath9k_hw 417147 2 ath9k_common,ath9k_htc
> rtl8192cu 67684 0
> rtlwifi 83065 1 rtl8192cu
> rtl8192c_common 46137 1 rtl8192cu
> rfcomm 68979 10
>
> Checked ls /lib/firmware and yes,I have it by default
>
> ar3k
> ar5523.bin
> ar7010_1_1.fw
> ar7010.fw
> ar9170-1.fw
> ar9170-2.fw
> ar9170.fw
> ar9271.fw
>
>
> Why is it Realtek?????????? I need to use it with hostapd which doesn't
> support it as AP
>
> Thank you very much for your time
well, it is realtek. It's hard to say why :)
TP-Link TL-WN821 has four versions, v4 is realtek:
see this page:
http://wikidevi.com/wiki/TP-LINK_TL-WN821N_v4
if you can, please update this wiki page, provide some images of this
adapter, and if possible internal too.
Some thing like this will be great:
http://wikidevi.com/wiki/ALFA_Network_AWUS036NHA
--
Regards,
Oleksij
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ath9k-devel] Why Realtek instead of ath9K or carl9170??
2013-07-30 20:35 ` Oleksij Rempel
@ 2013-07-30 21:10 ` Stanislav Komarov
0 siblings, 0 replies; 3+ messages in thread
From: Stanislav Komarov @ 2013-07-30 21:10 UTC (permalink / raw)
To: ath9k-devel
Thank you, will do :)
31.07.2013 00:35, Oleksij Rempel ?????:
> Hi Stanislav,
>
> Am 30.07.2013 17:14, schrieb Stanislav Komarov:
>> Hi guys,
>>
>> I have an issue when trying to use TP-Link TL-WN821 as AP(Infrastructure
>> Mode).
>>
>> When I plug device to USB port I see in dmesg:
>>
>> [ 223.959068] usb 2-3: new high-speed USB device number 4 using
>> ehci-pci
>> [ 224.074513] usb 2-3: New USB device found, idVendor=0bda,
>> idProduct=8178
>> [ 224.074528] usb 2-3: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [ 224.074534] usb 2-3: Product: USB WLAN
>> [ 224.074539] usb 2-3: Manufacturer: 802.11n
>> [ 224.074549] usb 2-3: SerialNumber: 00e04c000001
>> [ 224.075802] rtl8192cu: Chip version 0x11
>> [ 224.119576] rtl8192cu: MAC address: a0:f3:c1:08:ba:a3
>> [ 224.119585] rtl8192cu: Board Type 0
>> [ 224.119793] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
>> [ 224.119856] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
>> [ 224.120198] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
>> [ 224.121622] rtlwifi: wireless switch is on
>> [ 224.222409] systemd-udevd[2045]: renamed network interface wlan0 to
>> wlp0s29f7u3
>>
>> lsusb says:
>> Bus 002 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU
>> 802.11n WLAN Adapter
>>
>> lsmod:
>>
>> ath9k_htc 65772 0
>> ath9k_common 13503 1 ath9k_htc
>> ath9k_hw 417147 2 ath9k_common,ath9k_htc
>> rtl8192cu 67684 0
>> rtlwifi 83065 1 rtl8192cu
>> rtl8192c_common 46137 1 rtl8192cu
>> rfcomm 68979 10
>>
>> Checked ls /lib/firmware and yes,I have it by default
>>
>> ar3k
>> ar5523.bin
>> ar7010_1_1.fw
>> ar7010.fw
>> ar9170-1.fw
>> ar9170-2.fw
>> ar9170.fw
>> ar9271.fw
>>
>>
>> Why is it Realtek?????????? I need to use it with hostapd which doesn't
>> support it as AP
>>
>> Thank you very much for your time
>
> well, it is realtek. It's hard to say why :)
>
> TP-Link TL-WN821 has four versions, v4 is realtek:
> see this page:
> http://wikidevi.com/wiki/TP-LINK_TL-WN821N_v4
>
> if you can, please update this wiki page, provide some images of this
> adapter, and if possible internal too.
>
> Some thing like this will be great:
> http://wikidevi.com/wiki/ALFA_Network_AWUS036NHA
>
--
*WBR,Stanislav Komarov *
E-Mail: st.komaroff at gmail.com
Skype: stkomaroff
ICQ: 113048692
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130731/7f08ff84/attachment.htm
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-07-30 21:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-30 15:14 [ath9k-devel] Why Realtek instead of ath9K or carl9170?? Stanislav Komarov
2013-07-30 20:35 ` Oleksij Rempel
2013-07-30 21:10 ` Stanislav Komarov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.