[U-Boot] [PATCH v3 1/4] arm, am33xx: add defines for gmii_sel_register bits

[Heiko Schocher <hs@denx.de>]

Hello Mugunthan,

Am 30.07.2013 10:40, schrieb Mugunthan V N:
> On 7/30/2013 1:23 PM, Heiko Schocher wrote:
>> Signed-off-by: Heiko Schocher<hs@denx.de>
>>
>> ---
>> - changes for v2:
>>    defined all bits used in the gmii_sel register as
>>    Tom Rini suggested
>> - changes for v3:
>>    rebased against u-boot-ti commit bb2a5d8f87fffb4fadfb205837decbd1b3e75f88
>> ---
>>   arch/arm/include/asm/arch-am33xx/cpu.h | 21 +++++++++++++++++++++
>>   board/isee/igep0033/board.c            |  6 ++----
>>   board/phytec/pcm051/board.c            |  2 --
>>   board/ti/am335x/board.c                |  6 +-----
>>   4 Dateien ge?ndert, 24 Zeilen hinzugef?gt(+), 11 Zeilen entfernt(-)
>>
>> diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
>> index bcb4c50..945a09b 100644
>> --- a/arch/arm/include/asm/arch-am33xx/cpu.h
>> +++ b/arch/arm/include/asm/arch-am33xx/cpu.h
>> @@ -336,6 +336,27 @@ struct ctrl_dev {
>>   	unsigned int resv4[4];
>>   	unsigned int miisel;		/* offset 0x50 */
>>   };
>> +
>> +/* gmii_sel register defines */
>> +#define GMII1_SEL_MII		0x0
>> +#define GMII1_SEL_RMII		0x1
>> +#define GMII1_SEL_RGMII		0x2
>> +#define GMII1_SEL_NOTUSED	0x3
> NOTUSED not needed as it is not supposed to be used.

Maybe it is used to check, that is it not set?
But I can remove it ...

>> +#define GMII2_SEL_MII		0x0
>> +#define GMII2_SEL_RMII		0x4
>> +#define GMII2_SEL_RGMII		0x8
>> +#define GMII2_SEL_NOTUSED	0xc
> NOTUSED not needed as it is not supposed to be used.

same here ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany