* HBR audio with intel HDA
@ 2013-08-01 16:29 ashecrow42
2013-08-01 16:37 ` Anssi Hannula
0 siblings, 1 reply; 6+ messages in thread
From: ashecrow42 @ 2013-08-01 16:29 UTC (permalink / raw)
To: tiwai, alsa-devel; +Cc: xingchao.wang
[-- Attachment #1: Type: text/plain, Size: 1836 bytes --]
Hi there,
I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
test, I get no signal in the AV receiver. I have tested using a dts-hd
encapsulated in spdif sample file (found there
http://samples.mplayerhq.hu/hdmi/) and commands bellow
- aplay -D hdmi devices
- aplay -D hw devices
- aplay -D plughw devices
Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
HBR kernel patches.
A. Configurations I have tested:
- hda driver upgrade (alsa devel ubuntu team daily builds)
- upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
- kernel upgrade to 3.9
- snd_hda_codec_realtek module backlist (to try to disable SPDIF)
/etc/modprobe.d/blacklist.conf
- snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
- fresh new ubuntu raring install with no modifications at all: still
no signal
B. Info:
cat /proc/asound/card0/codec* | grep Codec
Codec: Realtek ALC892
Codec: Intel CougarPoint HDMI
I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
with alsa debug and alsa debug verbose enabled in kernel I got the
alsa-info.txt attached file produced on raring with no modification
while playing dts-hd sample file with command:
aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
C. I add that:
- In every test I have non HD audio protocols (DTS and dolby) working
well in the same configuration
- I have tried with windows just to see if my hardware is broken and I
get DTS-HD audio with no problem
- Takashi, I've read your HD-Audio.txt file and as far as I see, I have
no known error message in kernel log
=> I and Wingchao Wang have conclued that it is driver or codec
related. Can you help me please?
Thanks a lot
PS: sorry if you receive this email twice, I have sent it again as I
was not member of the list the first time.
[-- Attachment #2: alsa-info.txt --]
[-- Type: text/plain, Size: 40785 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.62
!!################################
!!Script ran on: Wed Jul 31 16:33:07 UTC 2013
!!Linux Distribution
!!------------------
Ubuntu 13.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 13.04" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 13.04" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
!!DMI Information
!!---------------
Manufacturer: ZOTAC
Product Name: XXXXXX
Product Version: XX
Firmware Version: 4.6.4
!!Kernel Information
!!------------------
Kernel release: 3.8.13-perso
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k3.8.13-perso
Library version: 1.0.25
Utilities version: 1.0.25
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
No sound servers found.
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e00000 irq 52
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:1b.0 0403: 8086:1c20 (rev 05)
Subsystem: 19da:a206
!!Modprobe options (Sound related)
!!--------------------------------
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC892
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0892
Subsystem Id: 0x19da0000
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC892 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=16, device=0
Control: name="IEC958 Playback Pro Mask", index=16, device=0
Control: name="IEC958 Playback Default", index=16, device=0
Control: name="IEC958 Playback Switch", index=16, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="ALC892 Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC892 Analog", type="Audio", device=0
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x05 0x0b
Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x10
Node 0x12 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Master Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003736: IN OUT Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01a19830: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003736: IN OUT Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40020601: [N/A] Line Out at Ext N/A
Conn = 1/4, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x01441120: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=24
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 12
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x25 0x0b
Codec: Intel CougarPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862805
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=8, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560030: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---T+ 1 root audio 116, 9 Jul 31 18:30 /dev/snd/controlC0
crw-rw---T+ 1 root audio 116, 8 Jul 31 18:30 /dev/snd/hwC0D0
crw-rw---T+ 1 root audio 116, 7 Jul 31 18:30 /dev/snd/hwC0D3
crw-rw---T+ 1 root audio 116, 6 Jul 31 18:30 /dev/snd/pcmC0D0c
crw-rw---T+ 1 root audio 116, 5 Jul 31 18:30 /dev/snd/pcmC0D0p
crw-rw---T+ 1 root audio 116, 4 Jul 31 18:30 /dev/snd/pcmC0D1p
crw-rw---T+ 1 root audio 116, 3 Jul 31 18:31 /dev/snd/pcmC0D3p
crw-rw---T+ 1 root audio 116, 2 Jul 31 18:30 /dev/snd/pcmC0D7p
crw-rw---T+ 1 root audio 116, 1 Jul 31 18:30 /dev/snd/seq
crw-rw---T+ 1 root audio 116, 33 Jul 31 18:30 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Jul 31 18:30 .
drwxr-xr-x 3 root root 260 Jul 31 18:30 ..
lrwxrwxrwx 1 root root 12 Jul 31 18:30 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xf7e00000 irq 52'
Mixer name : 'Intel CougarPoint HDMI'
Components : 'HDA:10ec0892,19da0000,00100302 HDA:80862805,80860101,00100000'
Controls : 32
Simple ctrls : 8
Simple mixer control 'Master',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [on]
Front Right: Playback 0 [0%] [-64.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',16
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 0 [0%] [-16.00dB] [off]
Front Right: Capture 0 [0%] [-16.00dB] [off]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Master Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -6400
dbvalue.1 -6400
}
}
control.2 {
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.4 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.6 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.7 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 46'
dbmin -1600
dbmax 3000
dbvalue.0 -1600
dbvalue.1 -1600
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 16
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 16
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 16
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 16
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.16 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.17 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.18 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.19 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.21 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.22 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.23 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.24 {
iface PCM
device 3
name ELD
value '10000c006772000f00000000000000000c2d010041565236353052097f070f7f071707503f06c05706005f7e01675e000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read volatile'
type BYTES
count 83
}
}
control.25 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.26 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.27 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.28 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.29 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.30 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.31 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.32 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
snd_hda_codec_hdmi
snd_hda_codec_realtek
coretemp
kvm_intel
kvm
ghash_clmulni_intel
cryptd
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
microcode
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
arc4
psmouse
snd_timer
serio_raw
btusb
bluetooth
ath9k
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
mac_hid
i915
video
drm_kms_helper
snd
drm
soundcore
lpc_ich
i2c_algo_bit
lp
parport
mei
usb_storage
hid_generic
usbhid
hid
ahci
libahci
r8169
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x11 0x411111f0
0x12 0x411111f0
0x14 0x01014010
0x15 0x411111f0
0x16 0x411111f0
0x17 0x411111f0
0x18 0x01a19830
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1c 0x411111f0
0x1d 0x40020601
0x1e 0x01441120
0x1f 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x58560010
0x06 0x18560020
0x07 0x18560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:
!!ALSA/HDA dmesg
!!--------------
[ 7.970603] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.970710] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7.970748] hda-intel 0000:00:1b.0: chipset global capabilities = 0x4401
[ 7.970760] hda-intel 0000:00:1b.0: Clearing TCSEL
[ 7.970769] hda-intel 0000:00:1b.0: SCH snoop: Enabled
[ 7.976107] hda-intel 0000:00:1b.0: codec_mask = 0x9
[ 7.976195] hda-intel 0000:00:1b.0: codec #0 probed OK
[ 7.976239] hda-intel 0000:00:1b.0: codec #3 probed OK
[ 7.983529] SKU: Nid=0x1d sku_cfg=0x40020601
--
[ 7.984645] realtek: Enabling init ASM_ID=0x0601 CODEC_ID=10ec0892
[ 7.990350] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 7.990407] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 7.990449] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 7.994350] HDMI: detected monitor AVR650R at connection type HDMI
[ 7.994355] HDMI: available speakers: FL/FR LFE FC RL/RR
[ 7.994361] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 7.994365] HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 7.994368] HDMI: supports coding type AC-3: channels = 8, rates = 32000 44100 48000, max bitrate = 640000
[ 7.994371] HDMI: supports coding type DTS: channels = 8, rates = 44100 48000, max bitrate = 1536000
[ 7.994374] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[ 7.994377] HDMI: supports coding type DTS-HD: channels = 8, rates = 44100 48000 88200 96000 176400 192000
[ 7.994380] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 44100 48000 88200 96000 192000
[ 7.994425] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 7.994516] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 7.999130] HDMI: detected monitor AVR650R at connection type HDMI
[ 7.999134] HDMI: available speakers: FL/FR LFE FC RL/RR
[ 7.999139] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 7.999143] HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 7.999147] HDMI: supports coding type AC-3: channels = 8, rates = 32000 44100 48000, max bitrate = 640000
[ 7.999150] HDMI: supports coding type DTS: channels = 8, rates = 44100 48000, max bitrate = 1536000
[ 7.999153] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[ 7.999156] HDMI: supports coding type DTS-HD: channels = 8, rates = 44100 48000 88200 96000 176400 192000
[ 7.999160] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 44100 48000 88200 96000 192000
[ 7.999255] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 7.999427] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.999597] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.999739] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.999880] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.001130] HDMI: detected monitor AVR650R at connection type HDMI
[ 8.001134] HDMI: available speakers: FL/FR LFE FC RL/RR
[ 8.001138] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 8.001141] HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 8.001143] HDMI: supports coding type AC-3: channels = 8, rates = 32000 44100 48000, max bitrate = 640000
[ 8.001145] HDMI: supports coding type DTS: channels = 8, rates = 44100 48000, max bitrate = 1536000
[ 8.001146] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[ 8.001149] HDMI: supports coding type DTS-HD: channels = 8, rates = 44100 48000 88200 96000 176400 192000
[ 8.001151] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 44100 48000 88200 96000 192000
[ 9.032431] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
--
[ 12.009012] type=1400 audit(1375288257.749:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=894 comm="apparmor_parser"
[ 33.979716] hda_codec_cleanup_stream: NID=0x3
[ 43.773860] hda-intel 0000:00:1b.0: azx_pcm_prepare: bufsize=0x10000, format=0x1817
[ 43.773916] HDMI: select CA 0x0 for 8-channel allocation: FL/FR LFE FC RL/RR
[ 43.773984] hdmi_setup_audio_infoframe: pin=6 channels=8
[ 43.774184] HDMI: ASP channel 0 => slot 0
[ 43.774226] HDMI: ASP channel 1 => slot 1
[ 43.774269] HDMI: ASP channel 15 => slot 2
[ 43.774312] HDMI: ASP channel 15 => slot 3
[ 43.774370] HDMI: ASP channel 15 => slot 4
[ 43.774413] HDMI: ASP channel 15 => slot 5
[ 43.774456] HDMI: ASP channel 15 => slot 6
[ 43.774498] HDMI: ASP channel 15 => slot 7
[ 43.774583] HDMI: ELD buf size is 83
[ 43.774625] HDMI: DIP GP[0] buf size is 30
[ 43.774668] HDMI: DIP GP[1] buf size is 30
[ 43.774710] HDMI: DIP GP[2] buf size is 30
[ 43.774753] HDMI: DIP GP[3] buf size is 30
[ 43.774786] HDMI: DIP GP[4] buf size is 0
[ 43.774829] HDMI: DIP GP[5] buf size is 0
[ 43.774872] HDMI: DIP GP[6] buf size is 0
[ 43.774915] HDMI: DIP GP[7] buf size is 0
[ 43.775208] hdmi_setup_stream: NID=0x6, pinctl=0x40
[ 43.775210] hda_codec_setup_stream: NID=0x3, stream=0x8, channel=0, format=0x1817
[ 47.474612] hda-intel 0000:00:1b.0: azx_pcm_prepare: bufsize=0x10000, format=0x1817
[ 47.474656] HDMI: select CA 0x0 for 8-channel allocation: FL/FR LFE FC RL/RR
[ 47.475132] hdmi_setup_stream: NID=0x6, pinctl=0x40
[ 47.475134] hda_codec_setup_stream: NID=0x3, stream=0x8, channel=0, format=0x1817
[ 48.455631] hda-intel 0000:00:1b.0: azx_pcm_prepare: bufsize=0x10000, format=0x1817
[ 48.455676] HDMI: select CA 0x0 for 8-channel allocation: FL/FR LFE FC RL/RR
[ 48.456152] hdmi_setup_stream: NID=0x6, pinctl=0x40
[ 48.456154] hda_codec_setup_stream: NID=0x3, stream=0x8, channel=0, format=0x1817
[ 51.119825] hda_codec_cleanup_stream: NID=0x3
[ 51.119918] hda_codec_cleanup_stream: NID=0x3
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: HBR audio with intel HDA
2013-08-01 16:29 HBR audio with intel HDA ashecrow42
@ 2013-08-01 16:37 ` Anssi Hannula
2013-08-02 13:11 ` Ashecrow
0 siblings, 1 reply; 6+ messages in thread
From: Anssi Hannula @ 2013-08-01 16:37 UTC (permalink / raw)
To: ashecrow42; +Cc: tiwai, alsa-devel, xingchao.wang
01.08.2013 19:29, ashecrow42@free.fr kirjoitti:
> Hi there,
Hi!
> I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
> test, I get no signal in the AV receiver. I have tested using a dts-hd
> encapsulated in spdif sample file (found there
> http://samples.mplayerhq.hu/hdmi/) and commands bellow
>
> - aplay -D hdmi devices
> - aplay -D hw devices
> - aplay -D plughw devices
You need to set the non-pcm bit in AES0. Use e.g. "-D hdmi:AES0=0x06".
> Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
> HBR kernel patches.
>
>
> A. Configurations I have tested:
>
>
> - hda driver upgrade (alsa devel ubuntu team daily builds)
>
> - upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
>
> - kernel upgrade to 3.9
IIRC 3.9 (or newer) may indeed be needed since you have both hdmi and spdif.
> - snd_hda_codec_realtek module backlist (to try to disable SPDIF)
> /etc/modprobe.d/blacklist.conf
>
> - snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
>
> - fresh new ubuntu raring install with no modifications at all: still
> no signal
>
> B. Info:
>
> cat /proc/asound/card0/codec* | grep Codec
> Codec: Realtek ALC892
> Codec: Intel CougarPoint HDMI
>
> I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
>
> with alsa debug and alsa debug verbose enabled in kernel I got the
> alsa-info.txt attached file produced on raring with no modification
> while playing dts-hd sample file with command:
>
>
> aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
As per above you need to use
aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>
> C. I add that:
>
> - In every test I have non HD audio protocols (DTS and dolby) working
> well in the same configuration
>
> - I have tried with windows just to see if my hardware is broken and I
> get DTS-HD audio with no problem
>
> - Takashi, I've read your HD-Audio.txt file and as far as I see, I have
> no known error message in kernel log
>
>
> => I and Wingchao Wang have conclued that it is driver or codec
> related. Can you help me please?
>
> Thanks a lot
> PS: sorry if you receive this email twice, I have sent it again as I
> was not member of the list the first time.
--
Anssi Hannula
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: HBR audio with intel HDA
2013-08-01 16:37 ` Anssi Hannula
@ 2013-08-02 13:11 ` Ashecrow
2013-08-02 13:42 ` Anssi Hannula
0 siblings, 1 reply; 6+ messages in thread
From: Ashecrow @ 2013-08-02 13:11 UTC (permalink / raw)
To: Anssi Hannula; +Cc: tiwai, alsa-devel, xingchao.wang
Hi Anssi,
Thanks for your answer
Test on kernel 3.8 + non-pcm bit in AES0:
aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
=> same result: no signal
Test with a non spdif-encapsulated file extracted from blu ray which is 16 bits 8 channel 192 kHz :
aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.dts-hd.sample_track2_und.dts
=> I get a static noise and receiver shows PCM and 2 channels (front left and front right)
With kernel upgrade to 3.9: same result
Note that I have tested with alsa* 1.025 and intel-hda driver included in kernel
Do you have any other idea?
Thanks
Le 1 août 2013 à 18:37, Anssi Hannula a écrit :
> 01.08.2013 19:29, ashecrow42@free.fr kirjoitti:
>> Hi there,
>
> Hi!
>
>> I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
>> test, I get no signal in the AV receiver. I have tested using a dts-hd
>> encapsulated in spdif sample file (found there
>> http://samples.mplayerhq.hu/hdmi/) and commands bellow
>>
>> - aplay -D hdmi devices
>> - aplay -D hw devices
>> - aplay -D plughw devices
>
> You need to set the non-pcm bit in AES0. Use e.g. "-D hdmi:AES0=0x06".
>
>> Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
>> HBR kernel patches.
>>
>>
>> A. Configurations I have tested:
>>
>>
>> - hda driver upgrade (alsa devel ubuntu team daily builds)
>>
>> - upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
>>
>> - kernel upgrade to 3.9
>
> IIRC 3.9 (or newer) may indeed be needed since you have both hdmi and spdif.
>
>> - snd_hda_codec_realtek module backlist (to try to disable SPDIF)
>> /etc/modprobe.d/blacklist.conf
>>
>> - snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
>>
>> - fresh new ubuntu raring install with no modifications at all: still
>> no signal
>>
>> B. Info:
>>
>> cat /proc/asound/card0/codec* | grep Codec
>> Codec: Realtek ALC892
>> Codec: Intel CougarPoint HDMI
>>
>> I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
>>
>> with alsa debug and alsa debug verbose enabled in kernel I got the
>> alsa-info.txt attached file produced on raring with no modification
>> while playing dts-hd sample file with command:
>>
>>
>> aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
>
> As per above you need to use
> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>
>>
>> C. I add that:
>>
>> - In every test I have non HD audio protocols (DTS and dolby) working
>> well in the same configuration
>>
>> - I have tried with windows just to see if my hardware is broken and I
>> get DTS-HD audio with no problem
>>
>> - Takashi, I've read your HD-Audio.txt file and as far as I see, I have
>> no known error message in kernel log
>>
>>
>> => I and Wingchao Wang have conclued that it is driver or codec
>> related. Can you help me please?
>>
>> Thanks a lot
>> PS: sorry if you receive this email twice, I have sent it again as I
>> was not member of the list the first time.
>
>
> --
> Anssi Hannula
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: HBR audio with intel HDA
2013-08-02 13:11 ` Ashecrow
@ 2013-08-02 13:42 ` Anssi Hannula
[not found] ` <BD474694-A9C3-4ACA-AB88-D4448831B4C4@free.fr>
0 siblings, 1 reply; 6+ messages in thread
From: Anssi Hannula @ 2013-08-02 13:42 UTC (permalink / raw)
To: Ashecrow; +Cc: tiwai, alsa-devel, xingchao.wang
02.08.2013 16:11, Ashecrow kirjoitti:
> Hi Anssi,
> Thanks for your answer
>
> Test on kernel 3.8 + non-pcm bit in AES0:
> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
> => same result: no signal
Hmh, OK.
> Test with a non spdif-encapsulated file extracted from blu ray which is 16 bits 8 channel 192 kHz :
> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.dts-hd.sample_track2_und.dts
> => I get a static noise and receiver shows PCM and 2 channels (front left and front right)
You can't output non-encapsulated audio directly, you need to
encapsulate it e.g. with ffmpeg:
ffmpeg -i file.dtshd -acodec copy -f spdif file.dtshd.spdif
> With kernel upgrade to 3.9: same result
>
>
> Note that I have tested with alsa* 1.025 and intel-hda driver included in kernel
>
> Do you have any other idea?
You could try DEV=1 instead of DEV=0 (according to your log DEV=0 is
correct, though), and truehd (thd.spdif from ffmpeg samples).
If neither of those work, could you provide another alsa-info while
playing back using AES0=0x06 (with alsa debug enabled again)?
> Thanks
>
>
> Le 1 août 2013 à 18:37, Anssi Hannula a écrit :
>
>> 01.08.2013 19:29, ashecrow42@free.fr kirjoitti:
>>> Hi there,
>>
>> Hi!
>>
>>> I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
>>> test, I get no signal in the AV receiver. I have tested using a dts-hd
>>> encapsulated in spdif sample file (found there
>>> http://samples.mplayerhq.hu/hdmi/) and commands bellow
>>>
>>> - aplay -D hdmi devices
>>> - aplay -D hw devices
>>> - aplay -D plughw devices
>>
>> You need to set the non-pcm bit in AES0. Use e.g. "-D hdmi:AES0=0x06".
>>
>>> Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
>>> HBR kernel patches.
>>>
>>>
>>> A. Configurations I have tested:
>>>
>>>
>>> - hda driver upgrade (alsa devel ubuntu team daily builds)
>>>
>>> - upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
>>>
>>> - kernel upgrade to 3.9
>>
>> IIRC 3.9 (or newer) may indeed be needed since you have both hdmi and spdif.
>>
>>> - snd_hda_codec_realtek module backlist (to try to disable SPDIF)
>>> /etc/modprobe.d/blacklist.conf
>>>
>>> - snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
>>>
>>> - fresh new ubuntu raring install with no modifications at all: still
>>> no signal
>>>
>>> B. Info:
>>>
>>> cat /proc/asound/card0/codec* | grep Codec
>>> Codec: Realtek ALC892
>>> Codec: Intel CougarPoint HDMI
>>>
>>> I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
>>>
>>> with alsa debug and alsa debug verbose enabled in kernel I got the
>>> alsa-info.txt attached file produced on raring with no modification
>>> while playing dts-hd sample file with command:
>>>
>>>
>>> aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
>>
>> As per above you need to use
>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>
>>>
>>> C. I add that:
>>>
>>> - In every test I have non HD audio protocols (DTS and dolby) working
>>> well in the same configuration
>>>
>>> - I have tried with windows just to see if my hardware is broken and I
>>> get DTS-HD audio with no problem
>>>
>>> - Takashi, I've read your HD-Audio.txt file and as far as I see, I have
>>> no known error message in kernel log
>>>
>>>
>>> => I and Wingchao Wang have conclued that it is driver or codec
>>> related. Can you help me please?
>>>
>>> Thanks a lot
>>> PS: sorry if you receive this email twice, I have sent it again as I
>>> was not member of the list the first time.
>>
>>
>> --
>> Anssi Hannula
>
--
Anssi Hannula
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: HBR audio with intel HDA
[not found] ` <BD474694-A9C3-4ACA-AB88-D4448831B4C4@free.fr>
@ 2013-08-02 16:28 ` Anssi Hannula
2013-08-02 17:21 ` Ashecrow
0 siblings, 1 reply; 6+ messages in thread
From: Anssi Hannula @ 2013-08-02 16:28 UTC (permalink / raw)
To: Ashecrow; +Cc: Takashi Iwai, alsa-devel@alsa-project.org, Wang, Xingchao
02.08.2013 19:14, Ashecrow kirjoitti:
>
> Le 2 août 2013 à 15:42, Anssi Hannula a écrit :
>
>> 02.08.2013 16:11, Ashecrow kirjoitti:
>>> Hi Anssi,
>>> Thanks for your answer
>>>
>>> Test on kernel 3.8 + non-pcm bit in AES0:
>>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>> => same result: no signal
>>
>> Hmh, OK.
>>
>>> With kernel upgrade to 3.9: same result
>>>
>>>
>>> Note that I have tested with alsa* 1.025 and intel-hda driver included in kernel
>>>
>>> Do you have any other idea?
>>
>> You could try DEV=1 instead of DEV=0 (according to your log DEV=0 is
>> correct, though), and truehd (thd.spdif from ffmpeg samples).
>>
>> If neither of those work, could you provide another alsa-info while
>> playing back using AES0=0x06 (with alsa debug enabled again)?
>>
> I have already tried DEV=1 but it does the same. Moreover, let me note that I play DTS and dolby fine with DEV=0 in xbmc. So I guess it is the right device.
OK. Note that in some cases you can hear stereo audio or AC-3/DTS even
when using wrong DEV=x (but HBR or multichannel audio would not work).
> see attached alsa-info.txt_dev0_kernel-3.8_aes0_dts-hd which is result of playing dts-hd spdif encapsulated with kernel 3.8 in debug mode and AES0=0x06 through command bellow
>
> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>
> see attached alsa-info.txt_dev0_kernel-3.8_aes0_true-hd which is result of playing dts-hd spdif encapsulated with kernel 3.8 in debug mode and AES0=0x06 through command bellow
>
> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 thd.spdif
>
Looks like your kernel is definitely too old to have working HBR on
Intel (the "ASP channel x => slot y" messages should have x=y), so
you'll need 3.9+.
Unfortunately I don't see anything else wrong (and HBR+intel works for
me), so I don't have anything else to suggest at the moment. Sorry.
> Thanks for your help
>
>>
>>
>>> Thanks
>>>
>>>
>>> Le 1 août 2013 à 18:37, Anssi Hannula a écrit :
>>>
>>>> 01.08.2013 19:29, ashecrow42@free.fr kirjoitti:
>>>>> Hi there,
>>>>
>>>> Hi!
>>>>
>>>>> I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
>>>>> test, I get no signal in the AV receiver. I have tested using a dts-hd
>>>>> encapsulated in spdif sample file (found there
>>>>> http://samples.mplayerhq.hu/hdmi/) and commands bellow
>>>>>
>>>>> - aplay -D hdmi devices
>>>>> - aplay -D hw devices
>>>>> - aplay -D plughw devices
>>>>
>>>> You need to set the non-pcm bit in AES0. Use e.g. "-D hdmi:AES0=0x06".
>>>>
>>>>> Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
>>>>> HBR kernel patches.
>>>>>
>>>>>
>>>>> A. Configurations I have tested:
>>>>>
>>>>>
>>>>> - hda driver upgrade (alsa devel ubuntu team daily builds)
>>>>>
>>>>> - upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
>>>>>
>>>>> - kernel upgrade to 3.9
>>>>
>>>> IIRC 3.9 (or newer) may indeed be needed since you have both hdmi and spdif.
>>>>
>>>>> - snd_hda_codec_realtek module backlist (to try to disable SPDIF)
>>>>> /etc/modprobe.d/blacklist.conf
>>>>>
>>>>> - snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
>>>>>
>>>>> - fresh new ubuntu raring install with no modifications at all: still
>>>>> no signal
>>>>>
>>>>> B. Info:
>>>>>
>>>>> cat /proc/asound/card0/codec* | grep Codec
>>>>> Codec: Realtek ALC892
>>>>> Codec: Intel CougarPoint HDMI
>>>>>
>>>>> I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
>>>>>
>>>>> with alsa debug and alsa debug verbose enabled in kernel I got the
>>>>> alsa-info.txt attached file produced on raring with no modification
>>>>> while playing dts-hd sample file with command:
>>>>>
>>>>>
>>>>> aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
>>>>
>>>> As per above you need to use
>>>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>>>
>>>>>
>>>>> C. I add that:
>>>>>
>>>>> - In every test I have non HD audio protocols (DTS and dolby) working
>>>>> well in the same configuration
>>>>>
>>>>> - I have tried with windows just to see if my hardware is broken and I
>>>>> get DTS-HD audio with no problem
>>>>>
>>>>> - Takashi, I've read your HD-Audio.txt file and as far as I see, I have
>>>>> no known error message in kernel log
>>>>>
>>>>>
>>>>> => I and Wingchao Wang have conclued that it is driver or codec
>>>>> related. Can you help me please?
>>>>>
>>>>> Thanks a lot
>>>>> PS: sorry if you receive this email twice, I have sent it again as I
>>>>> was not member of the list the first time.
>>>>
>>>>
>>>> --
>>>> Anssi Hannula
>>>
>>
>>
>> --
>> Anssi Hannula
>
--
Anssi Hannula
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: HBR audio with intel HDA
2013-08-02 16:28 ` Anssi Hannula
@ 2013-08-02 17:21 ` Ashecrow
0 siblings, 0 replies; 6+ messages in thread
From: Ashecrow @ 2013-08-02 17:21 UTC (permalink / raw)
To: Anssi Hannula; +Cc: Takashi Iwai, alsa-devel@alsa-project.org, Wang, Xingchao
Le 2 août 2013 à 18:28, Anssi Hannula a écrit :
> 02.08.2013 19:14, Ashecrow kirjoitti:
>>
>> Le 2 août 2013 à 15:42, Anssi Hannula a écrit :
>>
>>> 02.08.2013 16:11, Ashecrow kirjoitti:
>>>> Hi Anssi,
>>>> Thanks for your answer
>>>>
>>>> Test on kernel 3.8 + non-pcm bit in AES0:
>>>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>>> => same result: no signal
>>>
>>> Hmh, OK.
>>>
>>>> With kernel upgrade to 3.9: same result
>>>>
>>>>
>>>> Note that I have tested with alsa* 1.025 and intel-hda driver included in kernel
>>>>
>>>> Do you have any other idea?
>>>
>>> You could try DEV=1 instead of DEV=0 (according to your log DEV=0 is
>>> correct, though), and truehd (thd.spdif from ffmpeg samples).
>>>
>>> If neither of those work, could you provide another alsa-info while
>>> playing back using AES0=0x06 (with alsa debug enabled again)?
>>>
>> I have already tried DEV=1 but it does the same. Moreover, let me note that I play DTS and dolby fine with DEV=0 in xbmc. So I guess it is the right device.
>
> OK. Note that in some cases you can hear stereo audio or AC-3/DTS even
> when using wrong DEV=x (but HBR or multichannel audio would not work).
ok but it works for neither hdmi:...DEV=0 nor hdmi:... DEV=1
>
>> see attached alsa-info.txt_dev0_kernel-3.8_aes0_dts-hd which is result of playing dts-hd spdif encapsulated with kernel 3.8 in debug mode and AES0=0x06 through command bellow
>>
>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>
>> see attached alsa-info.txt_dev0_kernel-3.8_aes0_true-hd which is result of playing dts-hd spdif encapsulated with kernel 3.8 in debug mode and AES0=0x06 through command bellow
>>
>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 thd.spdif
>>
>
> Looks like your kernel is definitely too old to have working HBR on
> Intel (the "ASP channel x => slot y" messages should have x=y), so
> you'll need 3.9+.
Ok but I did the test with kernel 3.9.3 and it doesn't work
>
> Unfortunately I don't see anything else wrong (and HBR+intel works for
> me), so I don't have anything else to suggest at the moment. Sorry.
Ok I know it works for many people who have intel hardware but not for my hardware. I've been struggling with this for 6 months and still no clue.
How can I start a debug process?
>
>
>> Thanks for your help
>>
>>>
>>>
>>>> Thanks
>>>>
>>>>
>>>> Le 1 août 2013 à 18:37, Anssi Hannula a écrit :
>>>>
>>>>> 01.08.2013 19:29, ashecrow42@free.fr kirjoitti:
>>>>>> Hi there,
>>>>>
>>>>> Hi!
>>>>>
>>>>>> I have troubles using HBR audio (DTS-HD and Dolby TrueHD). With every
>>>>>> test, I get no signal in the AV receiver. I have tested using a dts-hd
>>>>>> encapsulated in spdif sample file (found there
>>>>>> http://samples.mplayerhq.hu/hdmi/) and commands bellow
>>>>>>
>>>>>> - aplay -D hdmi devices
>>>>>> - aplay -D hw devices
>>>>>> - aplay -D plughw devices
>>>>>
>>>>> You need to set the non-pcm bit in AES0. Use e.g. "-D hdmi:AES0=0x06".
>>>>>
>>>>>> Note that I use ubuntu raring with 3.8 kernel that includes Xingchao's
>>>>>> HBR kernel patches.
>>>>>>
>>>>>>
>>>>>> A. Configurations I have tested:
>>>>>>
>>>>>>
>>>>>> - hda driver upgrade (alsa devel ubuntu team daily builds)
>>>>>>
>>>>>> - upgrade alsa-lib & alsa-utils (alsa-testing launchpad)
>>>>>>
>>>>>> - kernel upgrade to 3.9
>>>>>
>>>>> IIRC 3.9 (or newer) may indeed be needed since you have both hdmi and spdif.
>>>>>
>>>>>> - snd_hda_codec_realtek module backlist (to try to disable SPDIF)
>>>>>> /etc/modprobe.d/blacklist.conf
>>>>>>
>>>>>> - snd_hda_codec_realtek index = -2 in /etc/modprobe.d/alsa-base.conf
>>>>>>
>>>>>> - fresh new ubuntu raring install with no modifications at all: still
>>>>>> no signal
>>>>>>
>>>>>> B. Info:
>>>>>>
>>>>>> cat /proc/asound/card0/codec* | grep Codec
>>>>>> Codec: Realtek ALC892
>>>>>> Codec: Intel CougarPoint HDMI
>>>>>>
>>>>>> I use zotac ZBOX ID82 (intel HM65 chipset with hdmi and spdif)
>>>>>>
>>>>>> with alsa debug and alsa debug verbose enabled in kernel I got the
>>>>>> alsa-info.txt attached file produced on raring with no modification
>>>>>> while playing dts-hd sample file with command:
>>>>>>
>>>>>>
>>>>>> aplay -D hdmi:CARD=PCH,DEV=0 -c8 -fs16_le -r192000 dts.spdif
>>>>>
>>>>> As per above you need to use
>>>>> aplay -D hdmi:CARD=PCH,DEV=0,AES0=0x06 -c8 -fs16_le -r192000 dts.spdif
>>>>>
>>>>>>
>>>>>> C. I add that:
>>>>>>
>>>>>> - In every test I have non HD audio protocols (DTS and dolby) working
>>>>>> well in the same configuration
>>>>>>
>>>>>> - I have tried with windows just to see if my hardware is broken and I
>>>>>> get DTS-HD audio with no problem
>>>>>>
>>>>>> - Takashi, I've read your HD-Audio.txt file and as far as I see, I have
>>>>>> no known error message in kernel log
>>>>>>
>>>>>>
>>>>>> => I and Wingchao Wang have conclued that it is driver or codec
>>>>>> related. Can you help me please?
>>>>>>
>>>>>> Thanks a lot
>>>>>> PS: sorry if you receive this email twice, I have sent it again as I
>>>>>> was not member of the list the first time.
>>>>>
>>>>>
>>>>> --
>>>>> Anssi Hannula
>>>>
>>>
>>>
>>> --
>>> Anssi Hannula
>>
>
>
> --
> Anssi Hannula
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-02 17:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-01 16:29 HBR audio with intel HDA ashecrow42
2013-08-01 16:37 ` Anssi Hannula
2013-08-02 13:11 ` Ashecrow
2013-08-02 13:42 ` Anssi Hannula
[not found] ` <BD474694-A9C3-4ACA-AB88-D4448831B4C4@free.fr>
2013-08-02 16:28 ` Anssi Hannula
2013-08-02 17:21 ` Ashecrow
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.