Re: [PATCH v6 2/3] clocksource: Add JH7110 timer driver

[Xingyu Wu <xingyu.wu@starfivetech.com>]

On 2023/10/13 19:16, Emil Renner Berthing wrote:
> Xingyu Wu wrote:
>> On 2023/10/13 1:53, Christophe JAILLET wrote:
>> > Le 12/10/2023 à 10:10, Xingyu Wu a écrit :
>> >> Add timer driver for the StarFive JH7110 SoC.
>> >>
>> >> Signed-off-by: Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
>> >
>> > ...
>>
>> It looks normal in my email and the web. Is this due to some settings?
>>
>> >
>> >> +static int jh7110_timer_probe(struct platform_device *pdev)
>> >> +{
>> >> +    struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
>> >> +    char name[4];
>> >> +    struct clk *pclk;
>> >> +    struct reset_control *rst;
>> >> +    int ch;
>> >> +    int ret;
>> >> +    void __iomem *base;
>> >> +
>> >> +    base = devm_platform_ioremap_resource(pdev, 0);
>> >> +    if (IS_ERR(base))
>> >> +        return dev_err_probe(&pdev->dev, PTR_ERR(base),
>> >> +                     "failed to map registers\n");
>> >> +
>> >> +    rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
>> >> +    if (IS_ERR(rst))
>> >> +        return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
>> >> +
>> >> +    pclk = devm_clk_get_enabled(&pdev->dev, "apb");
>> >> +    if (IS_ERR(pclk))
>> >> +        return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
>> >> +                     "failed to get & enable apb clock\n");
>> >> +
>> >> +    ret = reset_control_deassert(rst);
>> >> +    if (ret)
>> >> +        return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
>> >
>> > Hi,
>> >
>> > I'm not very familiar with the reset_control_[de]assert() functions, but shouldn't this be undone by a reset_control_assert() call if an error occurs later?
>>
>> In this case, the reset controller is set from 'assert' state to 'deassert' state. If it is failed and still 'assert' state, I don't think it need to call reset_control_assert().
> 
> The problem is if the assert succeeds, but the probe function fails later. Then
> there is nothing to undo the deassert. A common pattern I see is something like
> this:
> 
> static void jh7110_timer_reset_control_assert(void *data)
> {
> 	reset_control_assert(data);
> }
> 
> ...
> 
> 	ret = reset_control_deassert(rst);
> 	if (ret)
> 		return dev_err_probe(...);
> 
> 	ret = devm_add_action_or_reset(&pdev->dev,
> jh7110_timer_reset_control_assert, rst);
> 	if (ret)
> 		return ret;
> 
> /Emil

It is a good idea! Let me try it.

Thanks,
Xingyu Wu

> 
>> >
>> >> +
>> >> +    for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
>> >> +        clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
>> >> +        if (!clkevt[ch])
>> >> +            return -ENOMEM;
>> >> +
>> >> +        snprintf(name, sizeof(name), "ch%d", ch);
>> >> +
>> >> +        clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
>> >> +        /* Ensure timer is disabled */
>> >> +        jh7110_timer_disable(clkevt[ch]);
>> >> +
>> >> +        rst = devm_reset_control_get_exclusive(&pdev->dev, name);
>> >> +        if (IS_ERR(rst))
>> >> +            return PTR_ERR(rst);
>> >> +
>> >> +        clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
>> >> +        if (IS_ERR(clkevt[ch]->clk))
>> >> +            return PTR_ERR(clkevt[ch]->clk);
>> >> +
>> >> +        ret = reset_control_deassert(rst);
>> >> +        if (ret)
>> >> +            return ret;
>> >
>> > Same here.
>> >
>> >> +
>> >> +        clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
>> >> +        if (clkevt[ch]->evt.irq < 0)
>> >> +            return clkevt[ch]->evt.irq;
>> >> +
>> >> +        snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
>> >> +        jh7110_clockevents_register(clkevt[ch]);
>> >> +
>> >> +        ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
>> >> +                       IRQF_TIMER | IRQF_IRQPOLL,
>> >> +                       clkevt[ch]->name, &clkevt[ch]->evt);
>> >> +        if (ret)
>> >> +            return ret;
>> >> +
>> >> +        ret = jh7110_clocksource_init(clkevt[ch]);
>> >
>> > Does something should be done if this fails?
>> >
>> > CJ
>>
>> Yes, it should be call reset_control_assert() here and I will add it in next version.
>>
>> >
>> >> +        if (ret)
>> >> +            return ret;
>> >> +    }
>> >> +
>> >> +    return 0;
>> >> +}
>> >> +
>> >> +static const struct of_device_id jh7110_timer_match[] = {
>> >> +    { .compatible = "starfive,jh7110-timer", },
>> >> +    { /* sentinel */ }
>> >> +};
>> >> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
>> >> +
>> >> +static struct platform_driver jh7110_timer_driver = {
>> >> +    .probe = jh7110_timer_probe,
>> >> +    .driver = {
>> >> +        .name = "jh7110-timer",
>> >> +        .of_match_table = jh7110_timer_match,
>> >> +    },
>> >> +};
>> >> +module_platform_driver(jh7110_timer_driver);
>> >> +
>> >> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>");
>> >> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
>> >> +MODULE_LICENSE("GPL");
>> >
>>
>> Thanks,
>> Xingyu Wu
>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv