From: Kukjin Kim <kgene.kim@samsung.com>
To: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Olof Johansson <olof@lixom.net>,
Kukjin Kim <kgene.kim@samsung.com>, Arnd Bergmann <arnd@arndb.de>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] Samsung PWM support cleanup
Date: Wed, 07 Aug 2013 07:08:47 +0900 [thread overview]
Message-ID: <520173EF.1040808@samsung.com> (raw)
In-Reply-To: <3573853.gDiLaTfgOu@flatron>
On 08/06/13 08:32, Tomasz Figa wrote:
> Hi Olof, Arnd,
>
> Here is the Samsung PWM cleanup series for you. Particular patches of the
> series involve following modifications:
> 1) fixing up few things in samsung_pwm_timer clocksource driver,
> 2) moving remaining Samsung platforms to the new clocksource driver,
> 3) removing old clocksource driver,
> 4) adding new multiplatform- and DT-aware PWM driver,
> 5) moving all Samsung platforms to use the new PWM driver,
> 6) removing old PWM driver,
> 7) removing all PWM-related code that is not used anymore.
>
> This is my first pull request ever, so I hope I haven't screwed up anything. ;)
>
> Best regards,
> Tomasz
>
> The following changes since commit c095ba7224d8edc71dcef0d655911399a8bd4a3f:
>
> Linux 3.11-rc4 (2013-08-04 13:46:46 -0700)
>
> are available in the git repository at:
>
> git://github.com/tom3q/linux.git v3.12-next/pwm-cleanup
>
> for you to fetch changes up to 519e8e0da7509fcc71c12bcd3a681bb62770f692:
>
> ARM: SAMSUNG: Remove plat/regs-timer.h header (2013-08-06 01:21:55 +0200)
>
> ----------------------------------------------------------------
> Tomasz Figa (20):
> clocksource: samsung_pwm_timer: Do not request PWM mem region
> clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit
> clocksource: samsung_pwm_timer: Cache clocksource register address
> clocksource: samsung_pwm_timer: Do not use clocksource_mmio
> clocksource: samsung_pwm_timer: Handle suspend/resume correctly
> ARM: SAMSUNG: Unify base address definitions of timer block
> ARM: SAMSUNG: Add new PWM platform device
> ARM: SAMSUNG: Set PWM platform data
> ARM: SAMSUNG: Move all platforms to new clocksource driver
> ARM: SAMSUNG: Remove old samsung-time driver
> ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
> pwm: samsung: Rename to pwm-samsung-legacy
> pwm: Add new pwm-samsung driver
> ARM: SAMSUNG: Rework private data handling in dev-backlight
> ARM: SAMSUNG: Modify board files to use new PWM platform device
> pwm: Remove superseded pwm-samsung-legacy driver
> ARM: SAMSUNG: Remove old PWM timer platform devices
> ARM: SAMSUNG: Remove pwm-clock infrastructure
> ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
> ARM: SAMSUNG: Remove plat/regs-timer.h header
>
> arch/arm/Kconfig | 11 +-
> arch/arm/mach-s3c24xx/Kconfig | 6 -
> arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
> arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
> arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
> arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
> arch/arm/mach-s3c24xx/common.c | 27 +
> arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
> arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
> arch/arm/mach-s3c64xx/Kconfig | 2 -
> arch/arm/mach-s3c64xx/clock.c | 2 -
> arch/arm/mach-s3c64xx/common.c | 32 +-
> arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
> arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> arch/arm/mach-s3c64xx/irq-pm.c | 2 -
> arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
> arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
> arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
> arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
> arch/arm/mach-s5p64x0/Kconfig | 2 -
> arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
> arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
> arch/arm/mach-s5p64x0/common.c | 27 +
> arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
> arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
> arch/arm/mach-s5p64x0/mach-smdk6440.c | 5 +-
> arch/arm/mach-s5p64x0/mach-smdk6450.c | 5 +-
> arch/arm/mach-s5p64x0/pm.c | 3 -
> arch/arm/mach-s5pc100/Kconfig | 1 -
> arch/arm/mach-s5pc100/clock.c | 2 -
> arch/arm/mach-s5pc100/common.c | 28 +
> arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
> arch/arm/mach-s5pc100/include/mach/map.h | 1 +
> arch/arm/mach-s5pc100/mach-smdkc100.c | 5 +-
> arch/arm/mach-s5pv210/Kconfig | 1 -
> arch/arm/mach-s5pv210/clock.c | 1 -
> arch/arm/mach-s5pv210/common.c | 28 +
> arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
> arch/arm/mach-s5pv210/include/mach/map.h | 1 +
> arch/arm/mach-s5pv210/mach-smdkv210.c | 5 +-
> arch/arm/mach-s5pv210/pm.c | 10 -
> arch/arm/plat-samsung/Kconfig | 14 -
> arch/arm/plat-samsung/Makefile | 3 -
> arch/arm/plat-samsung/dev-backlight.c | 61 +-
> arch/arm/plat-samsung/devs.c | 42 +-
> arch/arm/plat-samsung/include/plat/clock.h | 4 -
> arch/arm/plat-samsung/include/plat/devs.h | 1 +
> arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
> arch/arm/plat-samsung/include/plat/irqs.h | 9 -
> arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
> arch/arm/plat-samsung/include/plat/pwm-core.h | 22 +
> arch/arm/plat-samsung/include/plat/regs-timer.h | 124 ----
> arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
> arch/arm/plat-samsung/irq-vic-timer.c | 98 ---
> arch/arm/plat-samsung/pwm-clock.c | 474 --------------
> arch/arm/plat-samsung/s5p-irq.c | 4 -
> arch/arm/plat-samsung/samsung-time.c | 394 ------------
> drivers/clocksource/Kconfig | 1 -
> drivers/clocksource/samsung_pwm_timer.c | 108 ++--
> drivers/pwm/pwm-samsung.c | 709 ++++++++++++++-------
> 61 files changed, 786 insertions(+), 1660 deletions(-)
> delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
> delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
> create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
> delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
> delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
> delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
> delete mode 100644 arch/arm/plat-samsung/samsung-time.c
>
Just note that I also have pulled into samsung tree because of
dependency with others, this will be pulled directly by Olof though.
Thanks,
Kukjin
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Samsung PWM support cleanup
Date: Wed, 07 Aug 2013 07:08:47 +0900 [thread overview]
Message-ID: <520173EF.1040808@samsung.com> (raw)
In-Reply-To: <3573853.gDiLaTfgOu@flatron>
On 08/06/13 08:32, Tomasz Figa wrote:
> Hi Olof, Arnd,
>
> Here is the Samsung PWM cleanup series for you. Particular patches of the
> series involve following modifications:
> 1) fixing up few things in samsung_pwm_timer clocksource driver,
> 2) moving remaining Samsung platforms to the new clocksource driver,
> 3) removing old clocksource driver,
> 4) adding new multiplatform- and DT-aware PWM driver,
> 5) moving all Samsung platforms to use the new PWM driver,
> 6) removing old PWM driver,
> 7) removing all PWM-related code that is not used anymore.
>
> This is my first pull request ever, so I hope I haven't screwed up anything. ;)
>
> Best regards,
> Tomasz
>
> The following changes since commit c095ba7224d8edc71dcef0d655911399a8bd4a3f:
>
> Linux 3.11-rc4 (2013-08-04 13:46:46 -0700)
>
> are available in the git repository at:
>
> git://github.com/tom3q/linux.git v3.12-next/pwm-cleanup
>
> for you to fetch changes up to 519e8e0da7509fcc71c12bcd3a681bb62770f692:
>
> ARM: SAMSUNG: Remove plat/regs-timer.h header (2013-08-06 01:21:55 +0200)
>
> ----------------------------------------------------------------
> Tomasz Figa (20):
> clocksource: samsung_pwm_timer: Do not request PWM mem region
> clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit
> clocksource: samsung_pwm_timer: Cache clocksource register address
> clocksource: samsung_pwm_timer: Do not use clocksource_mmio
> clocksource: samsung_pwm_timer: Handle suspend/resume correctly
> ARM: SAMSUNG: Unify base address definitions of timer block
> ARM: SAMSUNG: Add new PWM platform device
> ARM: SAMSUNG: Set PWM platform data
> ARM: SAMSUNG: Move all platforms to new clocksource driver
> ARM: SAMSUNG: Remove old samsung-time driver
> ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
> pwm: samsung: Rename to pwm-samsung-legacy
> pwm: Add new pwm-samsung driver
> ARM: SAMSUNG: Rework private data handling in dev-backlight
> ARM: SAMSUNG: Modify board files to use new PWM platform device
> pwm: Remove superseded pwm-samsung-legacy driver
> ARM: SAMSUNG: Remove old PWM timer platform devices
> ARM: SAMSUNG: Remove pwm-clock infrastructure
> ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
> ARM: SAMSUNG: Remove plat/regs-timer.h header
>
> arch/arm/Kconfig | 11 +-
> arch/arm/mach-s3c24xx/Kconfig | 6 -
> arch/arm/mach-s3c24xx/clock-s3c2410.c | 1 -
> arch/arm/mach-s3c24xx/clock-s3c2412.c | 1 -
> arch/arm/mach-s3c24xx/clock-s3c2416.c | 2 -
> arch/arm/mach-s3c24xx/clock-s3c2443.c | 2 -
> arch/arm/mach-s3c24xx/common.c | 27 +
> arch/arm/mach-s3c24xx/include/mach/map.h | 2 +
> arch/arm/mach-s3c24xx/mach-h1940.c | 4 +-
> arch/arm/mach-s3c24xx/mach-rx1950.c | 5 +-
> arch/arm/mach-s3c64xx/Kconfig | 2 -
> arch/arm/mach-s3c64xx/clock.c | 2 -
> arch/arm/mach-s3c64xx/common.c | 32 +-
> arch/arm/mach-s3c64xx/include/mach/irqs.h | 8 -
> arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> arch/arm/mach-s3c64xx/irq-pm.c | 2 -
> arch/arm/mach-s3c64xx/mach-crag6410.c | 4 +-
> arch/arm/mach-s3c64xx/mach-hmt.c | 4 +-
> arch/arm/mach-s3c64xx/mach-smartq.c | 4 +-
> arch/arm/mach-s3c64xx/mach-smdk6410.c | 5 +-
> arch/arm/mach-s5p64x0/Kconfig | 2 -
> arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 -
> arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 -
> arch/arm/mach-s5p64x0/common.c | 27 +
> arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 -
> arch/arm/mach-s5p64x0/include/mach/map.h | 1 +
> arch/arm/mach-s5p64x0/mach-smdk6440.c | 5 +-
> arch/arm/mach-s5p64x0/mach-smdk6450.c | 5 +-
> arch/arm/mach-s5p64x0/pm.c | 3 -
> arch/arm/mach-s5pc100/Kconfig | 1 -
> arch/arm/mach-s5pc100/clock.c | 2 -
> arch/arm/mach-s5pc100/common.c | 28 +
> arch/arm/mach-s5pc100/include/mach/irqs.h | 2 -
> arch/arm/mach-s5pc100/include/mach/map.h | 1 +
> arch/arm/mach-s5pc100/mach-smdkc100.c | 5 +-
> arch/arm/mach-s5pv210/Kconfig | 1 -
> arch/arm/mach-s5pv210/clock.c | 1 -
> arch/arm/mach-s5pv210/common.c | 28 +
> arch/arm/mach-s5pv210/include/mach/irqs.h | 2 -
> arch/arm/mach-s5pv210/include/mach/map.h | 1 +
> arch/arm/mach-s5pv210/mach-smdkv210.c | 5 +-
> arch/arm/mach-s5pv210/pm.c | 10 -
> arch/arm/plat-samsung/Kconfig | 14 -
> arch/arm/plat-samsung/Makefile | 3 -
> arch/arm/plat-samsung/dev-backlight.c | 61 +-
> arch/arm/plat-samsung/devs.c | 42 +-
> arch/arm/plat-samsung/include/plat/clock.h | 4 -
> arch/arm/plat-samsung/include/plat/devs.h | 1 +
> arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 -
> arch/arm/plat-samsung/include/plat/irqs.h | 9 -
> arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 ---
> arch/arm/plat-samsung/include/plat/pwm-core.h | 22 +
> arch/arm/plat-samsung/include/plat/regs-timer.h | 124 ----
> arch/arm/plat-samsung/include/plat/samsung-time.h | 23 -
> arch/arm/plat-samsung/irq-vic-timer.c | 98 ---
> arch/arm/plat-samsung/pwm-clock.c | 474 --------------
> arch/arm/plat-samsung/s5p-irq.c | 4 -
> arch/arm/plat-samsung/samsung-time.c | 394 ------------
> drivers/clocksource/Kconfig | 1 -
> drivers/clocksource/samsung_pwm_timer.c | 108 ++--
> drivers/pwm/pwm-samsung.c | 709 ++++++++++++++-------
> 61 files changed, 786 insertions(+), 1660 deletions(-)
> delete mode 100644 arch/arm/plat-samsung/include/plat/irq-vic-timer.h
> delete mode 100644 arch/arm/plat-samsung/include/plat/pwm-clock.h
> create mode 100644 arch/arm/plat-samsung/include/plat/pwm-core.h
> delete mode 100644 arch/arm/plat-samsung/include/plat/regs-timer.h
> delete mode 100644 arch/arm/plat-samsung/irq-vic-timer.c
> delete mode 100644 arch/arm/plat-samsung/pwm-clock.c
> delete mode 100644 arch/arm/plat-samsung/samsung-time.c
>
Just note that I also have pulled into samsung tree because of
dependency with others, this will be pulled directly by Olof though.
Thanks,
Kukjin
next prev parent reply other threads:[~2013-08-06 22:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-05 23:32 [GIT PULL] Samsung PWM support cleanup Tomasz Figa
2013-08-05 23:32 ` Tomasz Figa
2013-08-06 22:08 ` Kukjin Kim [this message]
2013-08-06 22:08 ` Kukjin Kim
2013-08-10 12:16 ` Tomasz Figa
2013-08-10 12:16 ` Tomasz Figa
2013-08-11 23:17 ` Olof Johansson
2013-08-11 23:17 ` Olof Johansson
2013-08-12 10:05 ` Kukjin Kim
2013-08-12 10:05 ` Kukjin Kim
2013-08-11 23:15 ` Olof Johansson
2013-08-11 23:15 ` Olof Johansson
-- strict thread matches above, loose matches on Subject: below --
2013-08-13 21:16 Tomasz Figa
2013-08-13 21:16 ` Tomasz Figa
2013-08-14 6:07 ` Olof Johansson
2013-08-14 6:07 ` Olof Johansson
2013-08-14 7:08 ` Kukjin Kim
2013-08-14 7:08 ` Kukjin Kim
2013-08-14 7:09 ` Olof Johansson
2013-08-14 7:09 ` Olof Johansson
2013-08-14 7:30 ` Kukjin Kim
2013-08-14 7:30 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520173EF.1040808@samsung.com \
--to=kgene.kim@samsung.com \
--cc=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.