From: Rajendra Nayak <rnayak@ti.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: OMAP2430 SDP boot broken after Linus' rmk merge
Date: Thu, 8 Aug 2013 11:07:39 +0530 [thread overview]
Message-ID: <52032EA3.90106@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1308071807240.28993@utopia.booyaka.com>
On Wednesday 07 August 2013 11:39 PM, Paul Walmsley wrote:
> Hi Rajendra,
>
> On Tue, 23 Jul 2013, Rajendra Nayak wrote:
>
>> So I tried commit 'fb2af00' on the 4430SDP and it did boot fine, though I see
>> the below errors. (I am using the mainline bootloaders which do not lock any
>> additional DPLLs like USB)
>
> Could you please send patches to fix these problems, or ensure that
> someone else from TI fixes them? Let's see if we can deal with the
> remaining bootloader dependencies here.
Sure Paul, I'll take a look at this.
>
> thanks
>
>
> - Paul
>
>>
>> [ 0.000000] clock: dpll_usb_ck failed transition to 'locked'
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] clock: trace_clk_div_ck: could not find divisor for target rate 0 for parent pmd_trace_clk_mux_ck
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] clock: dpll_per_m7x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m6x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m5x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m4x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>>
>>>
>>>
>>> - Paul
>>>
>>
>
>
> - Paul
>
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: OMAP2430 SDP boot broken after Linus' rmk merge
Date: Thu, 8 Aug 2013 11:07:39 +0530 [thread overview]
Message-ID: <52032EA3.90106@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1308071807240.28993@utopia.booyaka.com>
On Wednesday 07 August 2013 11:39 PM, Paul Walmsley wrote:
> Hi Rajendra,
>
> On Tue, 23 Jul 2013, Rajendra Nayak wrote:
>
>> So I tried commit 'fb2af00' on the 4430SDP and it did boot fine, though I see
>> the below errors. (I am using the mainline bootloaders which do not lock any
>> additional DPLLs like USB)
>
> Could you please send patches to fix these problems, or ensure that
> someone else from TI fixes them? Let's see if we can deal with the
> remaining bootloader dependencies here.
Sure Paul, I'll take a look at this.
>
> thanks
>
>
> - Paul
>
>>
>> [ 0.000000] clock: dpll_usb_ck failed transition to 'locked'
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] clock: trace_clk_div_ck: could not find divisor for target rate 0 for parent pmd_trace_clk_mux_ck
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] Division by zero in kernel.
>> [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7
>> [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14)
>> [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10)
>> [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114)
>> [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8)
>> [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8)
>> [ 0.000000] clock: dpll_per_m7x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m6x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m5x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>> [ 0.000000] clock: dpll_per_m4x2_ck: could not find divisor for target rate 0 for parent dpll_per_x2_ck
>>
>>>
>>>
>>> - Paul
>>>
>>
>
>
> - Paul
>
next prev parent reply other threads:[~2013-08-08 5:38 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 18:07 OMAP2430 SDP boot broken after Linus' rmk merge Paul Walmsley
2013-07-22 18:07 ` Paul Walmsley
2013-07-22 18:43 ` Russell King - ARM Linux
2013-07-22 18:43 ` Russell King - ARM Linux
2013-07-22 20:07 ` Paul Walmsley
2013-07-22 20:07 ` Paul Walmsley
2013-07-23 7:03 ` Rajendra Nayak
2013-07-23 7:03 ` Rajendra Nayak
2013-07-23 7:07 ` Paul Walmsley
2013-07-23 7:07 ` Paul Walmsley
2013-07-23 9:05 ` Rajendra Nayak
2013-07-23 9:05 ` Rajendra Nayak
2013-07-24 13:56 ` Will Deacon
2013-07-24 13:56 ` Will Deacon
2013-07-24 14:17 ` Santosh Shilimkar
2013-07-24 14:17 ` Santosh Shilimkar
2013-07-24 14:20 ` Will Deacon
2013-07-24 14:20 ` Will Deacon
2013-07-24 14:45 ` Santosh Shilimkar
2013-07-24 14:45 ` Santosh Shilimkar
2013-07-27 4:10 ` Paul Walmsley
2013-07-27 4:10 ` Paul Walmsley
2013-07-27 12:22 ` Will Deacon
2013-07-27 12:22 ` Will Deacon
2013-07-28 5:38 ` Paul Walmsley
2013-07-28 5:38 ` Paul Walmsley
2013-07-28 5:46 ` [PATCH] ARM: v6: avoid remaining accesses to missing CP15 registers on ARM1136 r0 Paul Walmsley
2013-07-28 5:46 ` Paul Walmsley
2013-07-28 5:58 ` Paul Walmsley
2013-07-28 5:58 ` Paul Walmsley
2013-07-28 6:00 ` [PATCH v2] " Paul Walmsley
2013-07-28 6:00 ` Paul Walmsley
2013-07-28 19:58 ` Paul Walmsley
2013-07-28 19:58 ` Paul Walmsley
2013-07-28 5:43 ` [PATCH] ARM: v6: avoid read_cpuid_ext() on ARM1136r0 in cache_ops_need_broadcast() Paul Walmsley
2013-07-28 5:43 ` Paul Walmsley
2013-07-28 11:10 ` Will Deacon
2013-07-28 11:10 ` Will Deacon
2013-07-28 11:52 ` Russell King - ARM Linux
2013-07-28 11:52 ` Russell King - ARM Linux
2013-07-28 19:56 ` Paul Walmsley
2013-07-28 19:56 ` Paul Walmsley
2013-07-28 19:47 ` Paul Walmsley
2013-07-28 19:47 ` Paul Walmsley
2013-07-28 20:16 ` [PATCH] ARM: v6: prevent gcc from reordering extended CP15 reads above is_smp() test Paul Walmsley
2013-07-28 20:16 ` Paul Walmsley
2013-07-29 7:30 ` Tony Lindgren
2013-07-29 7:30 ` Tony Lindgren
2013-07-29 10:02 ` Will Deacon
2013-07-29 10:02 ` Will Deacon
2013-07-30 10:58 ` Paul Walmsley
2013-07-30 10:58 ` Paul Walmsley
2013-07-30 11:32 ` [PATCH v2] ARM: v6: prevent gcc 4.5 " Paul Walmsley
2013-07-30 11:32 ` Paul Walmsley
2013-07-30 15:04 ` Will Deacon
2013-07-30 15:04 ` Will Deacon
2013-07-24 14:52 ` OMAP2430 SDP boot broken after Linus' rmk merge Russell King - ARM Linux
2013-07-24 14:52 ` Russell King - ARM Linux
2013-07-24 15:40 ` OMAP4430 SDP boot issues.. (Was Re: OMAP2430 SDP boot broken after Linus' rmk merge) Santosh Shilimkar
2013-07-24 15:40 ` Santosh Shilimkar
2013-07-24 17:23 ` Russell King - ARM Linux
2013-07-24 17:23 ` Russell King - ARM Linux
2013-07-24 18:17 ` Santosh Shilimkar
2013-07-24 18:17 ` Santosh Shilimkar
2013-07-25 6:40 ` OMAP2430 SDP boot broken after Linus' rmk merge Tomi Valkeinen
2013-07-25 6:40 ` Tomi Valkeinen
2013-07-25 6:50 ` Tomi Valkeinen
2013-07-25 6:50 ` Tomi Valkeinen
2013-07-26 22:59 ` Russell King - ARM Linux
2013-07-26 22:59 ` Russell King - ARM Linux
2013-08-07 18:09 ` Paul Walmsley
2013-08-07 18:09 ` Paul Walmsley
2013-08-08 5:37 ` Rajendra Nayak [this message]
2013-08-08 5:37 ` Rajendra Nayak
2013-08-08 10:20 ` Rajendra Nayak
2013-08-08 10:20 ` Rajendra Nayak
2013-07-23 10:33 ` Jonathan Austin
2013-07-23 10:33 ` Jonathan Austin
2013-07-31 0:57 ` Paul Walmsley
2013-07-31 0:57 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52032EA3.90106@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.