Re: [PATCH v3 0/9] DRA7xx core support

[Rajendra Nayak <rnayak@ti.com>]

On Sunday 04 August 2013 09:57 PM, Rajendra Nayak wrote:
> Changes in v3:
> -1- Dropped some clock/dpll framework builds for dra7
> -2- Added all instances of IPs in dtsi file
> -3- dtsi does a 'disabled' by default and dts enables as needed
> -4- soc_is_dra7xx() based on DT compatible instead of using ID code
> 
> Changes in v2:
> -1- Fixed minor changelog details
> -2- Dropped the SRAM support patch since we need to move to drivers/misc/sram.c
> -3- Added DTS update patches to this series which were earlier posted as
> part of the data series (Since they don't have much objections as against the
> other in-kernel data files)
> -4- Updated the EVM dts file with pin config details for uart/mcspi and i2c
> 
> DRA7xx based SoCs' are high-performance, infotainment application devices,
> based on enhanced OMAP architecture integrated on a 28nm
> technology.
> 
> The DRA7xx family is composed of DRA75x and DRA74x devices.
> The current device for which the patches add support is the
> DRA752 SoC.
> 
> Most of the core IPs are similar to those found on the OMAP5
> devices, including the dual cortex-A15 based MPU subsystem,
> which has helped quite some reuse from existing OMAP5 support.
> 
> This series contains only core support patches and none of
> the PRCM and hwmod data needed for the device to boot.

Tony, any chance of this series making it to 3.12?

regards,
Rajendra

> 
> The bootloader support for the platform is already available
> in mainline u-boot.
> 
> The patches posted in this series are available at:
> git://github.com/rrnayak/linux.git for-3.12/dra-core-v3
> 
> The patches (including the ones for in-kernel data) which boot
> on dra7xx evm are available at:
> t://github.com/rrnayak/linux.git out-of-tree/dra-integrated-v3
> 
> R Sricharan (8):
>   ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
>   ARM: DRA7: Reuse io tables and add a new .init_early
>   ARM: DRA7: Resue the clocksource, clockevent support
>   ARM: DRA7: board-generic: Add basic DT support
>   ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
>   ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
>   ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
>   ARM: DRA7: Add the build support in omap2plus
> 
> Rajendra Nayak (1):
>   ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
> 
>  .../devicetree/bindings/arm/omap/omap.txt          |    3 +
>  arch/arm/Kconfig                                   |    2 +-
>  arch/arm/boot/dts/Makefile                         |    3 +-
>  arch/arm/boot/dts/dra7-evm.dts                     |  140 +++++
>  arch/arm/boot/dts/dra7.dtsi                        |  567 ++++++++++++++++++++
>  arch/arm/configs/omap2plus_defconfig               |    1 +
>  arch/arm/mach-omap1/include/mach/soc.h             |    1 +
>  arch/arm/mach-omap2/Kconfig                        |   12 +-
>  arch/arm/mach-omap2/Makefile                       |    6 +
>  arch/arm/mach-omap2/board-generic.c                |   18 +
>  arch/arm/mach-omap2/common.h                       |    1 +
>  arch/arm/mach-omap2/id.c                           |    4 +-
>  arch/arm/mach-omap2/io.c                           |   20 +-
>  arch/arm/mach-omap2/omap54xx.h                     |    4 +
>  arch/arm/mach-omap2/omap_hwmod.c                   |    2 +-
>  arch/arm/mach-omap2/soc.h                          |   17 +
>  arch/arm/mach-omap2/timer.c                        |    3 +-
>  arch/arm/plat-omap/Kconfig                         |    2 +-
>  18 files changed, 795 insertions(+), 11 deletions(-)
>  create mode 100644 arch/arm/boot/dts/dra7-evm.dts
>  create mode 100644 arch/arm/boot/dts/dra7.dtsi
>