From: Rajendra Nayak <rnayak@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>
Subject: Re: [GIT PULL] DRA7xx core support
Date: Tue, 13 Aug 2013 17:08:36 +0530 [thread overview]
Message-ID: <520A1ABC.20604@ti.com> (raw)
In-Reply-To: <5208C832.2060007@ti.com>
Hi Tony,
Heres an updated pull request dropping the dts files.
The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
are available in the git repository at:
git://github.com/rrnayak/linux.git tags/dra7-core-support-minus-dt
for you to fetch changes up to 8dd21c93197cc465ae87e142435b3f7f262eade9:
ARM: DRA7: Add the build support in omap2plus (2013-08-13 16:58:16 +0530)
----------------------------------------------------------------
DRA7xx based SoC core support
----------------------------------------------------------------
R Sricharan (7):
ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
ARM: DRA7: Reuse io tables and add a new .init_early
ARM: DRA7: Resue the clocksource, clockevent support
ARM: DRA7: board-generic: Add basic DT support
ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
ARM: DRA7: Add the build support in omap2plus
Rajendra Nayak (1):
ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
.../devicetree/bindings/arm/omap/omap.txt | 3 +++
arch/arm/Kconfig | 2 +-
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/mach-omap1/include/mach/soc.h | 1 +
arch/arm/mach-omap2/Kconfig | 12 ++++++++++--
arch/arm/mach-omap2/Makefile | 6 ++++++
arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++
arch/arm/mach-omap2/common.h | 1 +
arch/arm/mach-omap2/id.c | 4 ++--
arch/arm/mach-omap2/io.c | 20 ++++++++++++++++++--
arch/arm/mach-omap2/omap54xx.h | 4 ++++
arch/arm/mach-omap2/omap_hwmod.c | 2 +-
arch/arm/mach-omap2/soc.h | 17 +++++++++++++++++
arch/arm/mach-omap2/timer.c | 3 ++-
arch/arm/plat-omap/Kconfig | 2 +-
15 files changed, 86 insertions(+), 10 deletions(-)
On Monday 12 August 2013 05:04 PM, Rajendra Nayak wrote:
> Hi Tony,
>
> Heres the pull request for the dra7xx core support patches.
>
> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>
> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>
> are available in the git repository at:
>
> git://github.com/rrnayak/linux.git tags/dra7-core-support-v3
>
> for you to fetch changes up to 41f2119b3037e50482cb14eaa39e6b5c52113fb5:
>
> ARM: DRA7: Add the build support in omap2plus (2013-08-12 15:25:38 +0530)
>
> ----------------------------------------------------------------
> DRA7xx based SoC core support
>
> ----------------------------------------------------------------
> R Sricharan (8):
> ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
> ARM: DRA7: Reuse io tables and add a new .init_early
> ARM: DRA7: Resue the clocksource, clockevent support
> ARM: DRA7: board-generic: Add basic DT support
> ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
> ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
> ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
> ARM: DRA7: Add the build support in omap2plus
>
> Rajendra Nayak (1):
> ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 140 +++++
> arch/arm/boot/dts/dra7.dtsi | 567 ++++++++++++++++++++
> arch/arm/configs/omap2plus_defconfig | 1 +
> arch/arm/mach-omap1/include/mach/soc.h | 1 +
> arch/arm/mach-omap2/Kconfig | 12 +-
> arch/arm/mach-omap2/Makefile | 6 +
> arch/arm/mach-omap2/board-generic.c | 18 +
> arch/arm/mach-omap2/common.h | 1 +
> arch/arm/mach-omap2/id.c | 4 +-
> arch/arm/mach-omap2/io.c | 20 +-
> arch/arm/mach-omap2/omap54xx.h | 4 +
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/soc.h | 17 +
> arch/arm/mach-omap2/timer.c | 3 +-
> arch/arm/plat-omap/Kconfig | 2 +-
> 18 files changed, 795 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
> create mode 100644 arch/arm/boot/dts/dra7.dtsi
>
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] DRA7xx core support
Date: Tue, 13 Aug 2013 17:08:36 +0530 [thread overview]
Message-ID: <520A1ABC.20604@ti.com> (raw)
In-Reply-To: <5208C832.2060007@ti.com>
Hi Tony,
Heres an updated pull request dropping the dts files.
The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
are available in the git repository at:
git://github.com/rrnayak/linux.git tags/dra7-core-support-minus-dt
for you to fetch changes up to 8dd21c93197cc465ae87e142435b3f7f262eade9:
ARM: DRA7: Add the build support in omap2plus (2013-08-13 16:58:16 +0530)
----------------------------------------------------------------
DRA7xx based SoC core support
----------------------------------------------------------------
R Sricharan (7):
ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
ARM: DRA7: Reuse io tables and add a new .init_early
ARM: DRA7: Resue the clocksource, clockevent support
ARM: DRA7: board-generic: Add basic DT support
ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
ARM: DRA7: Add the build support in omap2plus
Rajendra Nayak (1):
ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
.../devicetree/bindings/arm/omap/omap.txt | 3 +++
arch/arm/Kconfig | 2 +-
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/mach-omap1/include/mach/soc.h | 1 +
arch/arm/mach-omap2/Kconfig | 12 ++++++++++--
arch/arm/mach-omap2/Makefile | 6 ++++++
arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++
arch/arm/mach-omap2/common.h | 1 +
arch/arm/mach-omap2/id.c | 4 ++--
arch/arm/mach-omap2/io.c | 20 ++++++++++++++++++--
arch/arm/mach-omap2/omap54xx.h | 4 ++++
arch/arm/mach-omap2/omap_hwmod.c | 2 +-
arch/arm/mach-omap2/soc.h | 17 +++++++++++++++++
arch/arm/mach-omap2/timer.c | 3 ++-
arch/arm/plat-omap/Kconfig | 2 +-
15 files changed, 86 insertions(+), 10 deletions(-)
On Monday 12 August 2013 05:04 PM, Rajendra Nayak wrote:
> Hi Tony,
>
> Heres the pull request for the dra7xx core support patches.
>
> The following changes since commit d4e4ab86bcba5a72779c43dc1459f71fea3d89c8:
>
> Linux 3.11-rc5 (2013-08-11 18:04:20 -0700)
>
> are available in the git repository at:
>
> git://github.com/rrnayak/linux.git tags/dra7-core-support-v3
>
> for you to fetch changes up to 41f2119b3037e50482cb14eaa39e6b5c52113fb5:
>
> ARM: DRA7: Add the build support in omap2plus (2013-08-12 15:25:38 +0530)
>
> ----------------------------------------------------------------
> DRA7xx based SoC core support
>
> ----------------------------------------------------------------
> R Sricharan (8):
> ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
> ARM: DRA7: Reuse io tables and add a new .init_early
> ARM: DRA7: Resue the clocksource, clockevent support
> ARM: DRA7: board-generic: Add basic DT support
> ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
> ARM: DRA7: dts: Add the dts files for dra7 SoC and dra7-evm board
> ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
> ARM: DRA7: Add the build support in omap2plus
>
> Rajendra Nayak (1):
> ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/dra7-evm.dts | 140 +++++
> arch/arm/boot/dts/dra7.dtsi | 567 ++++++++++++++++++++
> arch/arm/configs/omap2plus_defconfig | 1 +
> arch/arm/mach-omap1/include/mach/soc.h | 1 +
> arch/arm/mach-omap2/Kconfig | 12 +-
> arch/arm/mach-omap2/Makefile | 6 +
> arch/arm/mach-omap2/board-generic.c | 18 +
> arch/arm/mach-omap2/common.h | 1 +
> arch/arm/mach-omap2/id.c | 4 +-
> arch/arm/mach-omap2/io.c | 20 +-
> arch/arm/mach-omap2/omap54xx.h | 4 +
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/soc.h | 17 +
> arch/arm/mach-omap2/timer.c | 3 +-
> arch/arm/plat-omap/Kconfig | 2 +-
> 18 files changed, 795 insertions(+), 11 deletions(-)
> create mode 100644 arch/arm/boot/dts/dra7-evm.dts
> create mode 100644 arch/arm/boot/dts/dra7.dtsi
>
next prev parent reply other threads:[~2013-08-13 11:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-12 11:34 [GIT PULL] DRA7xx core support Rajendra Nayak
2013-08-12 11:34 ` Rajendra Nayak
2013-08-13 7:40 ` Tony Lindgren
2013-08-13 7:40 ` Tony Lindgren
2013-08-13 11:26 ` Rajendra Nayak
2013-08-13 11:26 ` Rajendra Nayak
2013-08-13 11:38 ` Rajendra Nayak [this message]
2013-08-13 11:38 ` Rajendra Nayak
2013-08-14 8:39 ` Tony Lindgren
2013-08-14 8:39 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520A1ABC.20604@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.