From: Arnd Hannemann <arnd@arndnet.de>
To: daniel.vetter@ffwll.ch
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org
Subject: 3.11.0-rc5: WARNING: at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state
Date: Wed, 14 Aug 2013 17:54:28 +0200 [thread overview]
Message-ID: <520BA834.1020207@arndnet.de> (raw)
Hi,
when changing the refresh rate of my laptop display with xrandr on 3.11.0-rc5, like:
xrandr --output LVDS1 --rate 59.9 --mode 1920x1080
The following WARNING is generated:
[ 50.018055] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
[ 50.018060] ------------[ cut here ]------------
[ 50.018105] WARNING: CPU: 0 PID: 1819 at /home/arnd/Projekte/kernel/linux-2.6/drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x59f/0xa30 [i915]()
[ 50.018106] pipe state doesn't match!
[ 50.018107] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables joydev deflate ctr twofish_generic twofish_x86_64_3way twofish_x86_64 twofish_common camellia_generic camellia_x86_64 bridge stp llc serpent_sse2_x86_64 serpent_generic ablk_helper cryptd xts lrw gf128mul glue_helper blowfish_generic blowfish_x86_64 blowfish_common cast5_generic cast_common des_generic cmac xcbc rmd160 sha512_generic dm_crypt crypto_null af_key xfrm_algo arc4 iwldvm mac80211 snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm dm_multipath snd_pa
ge_alloc snd_seq_midi snd_seq_midi_event uvcvideo videobuf2_vmalloc thinkpad_acpi videobuf2_memops snd_rawmidi videobuf2_core nvram videodev media snd_seq snd_seq_device snd_timer psmouse se
rio_raw q
cserial usb_wwan usbserial intel_ips tpm_tis snd btusb bnep iwlwifi lpc_ich rfcomm bluetooth cfg80211 soundcore binfmt_misc btrfs xor zlib_deflate raid6_pq libcrc32c mmc_block mxm_wmi firewire_ohci firewire_core crc_itu_t wmi i915 video i2c_algo_bit drm_kms_helper drm e1000e sdhci_pci ptp sdhci ahci pps_core libahci
[ 50.018156] CPU: 0 PID: 1819 Comm: Xorg Not tainted 3.11.0-rc5aha+ #3
[ 50.018157] Hardware name: LENOVO 4384GEG/4384GEG, BIOS 6MET86WW (1.46 ) 05/24/2011
[ 50.018159] 0000000000000009 ffff880223b39870 ffffffff81633b7d ffff880223b398b8
[ 50.018160] ffff880223b398a8 ffffffff8104a69c ffff8802322fc6d0 0000000000000001
[ 50.018162] ffff88022d99d000 ffff8802322fc000 ffff88022d99d478 ffff880223b39908
[ 50.018164] Call Trace:
[ 50.018172] [<ffffffff81633b7d>] dump_stack+0x45/0x56
[ 50.018177] [<ffffffff8104a69c>] warn_slowpath_common+0x8c/0xc0
[ 50.018178] [<ffffffff8104a78c>] warn_slowpath_fmt+0x4c/0x50
[ 50.018191] [<ffffffffa011c68f>] check_crtc_state+0x59f/0xa30 [i915]
[ 50.018204] [<ffffffffa0127a4d>] intel_modeset_check_state+0x2cd/0x750 [i915]
[ 50.018215] [<ffffffffa0127f65>] intel_set_mode+0x25/0x30 [i915]
[ 50.018225] [<ffffffffa0128722>] intel_crtc_set_config+0x7b2/0x990 [i915]
[ 50.018241] [<ffffffffa009181d>] drm_mode_set_config_internal+0x5d/0xe0 [drm]
[ 50.018250] [<ffffffffa0093cdb>] drm_mode_setcrtc+0xfb/0x620 [drm]
[ 50.018260] [<ffffffffa011dfb2>] ? intel_crtc_load_lut+0xd2/0x190 [i915]
[ 50.018267] [<ffffffffa00843c9>] drm_ioctl+0x539/0x670 [drm]
[ 50.018276] [<ffffffffa0093be0>] ? drm_mode_setplane+0x3b0/0x3b0 [drm]
[ 50.018282] [<ffffffff81189bdc>] do_vfs_ioctl+0x8c/0x4f0
[ 50.018284] [<ffffffff8117a2a1>] ? __sb_end_write+0x31/0x60
[ 50.018286] [<ffffffff811785be>] ? vfs_write+0x17e/0x1e0
[ 50.018288] [<ffffffff8118a0d1>] SyS_ioctl+0x91/0xb0
[ 50.018291] [<ffffffff81642642>] system_call_fastpath+0x16/0x1b
[ 50.018293] ---[ end trace d0d4c4e12439b0ce ]---
This is pretty reproducable on a newly booted system, and already present since
-rc1 or such. The update of the refresh rate seems to work nevertheless, though.
Best regards
Arnd
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Hannemann <arnd@arndnet.de>
To: daniel.vetter@ffwll.ch
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org
Subject: 3.11.0-rc5: WARNING: at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state
Date: Wed, 14 Aug 2013 17:54:28 +0200 [thread overview]
Message-ID: <520BA834.1020207@arndnet.de> (raw)
Hi,
when changing the refresh rate of my laptop display with xrandr on 3.11.0-rc5, like:
xrandr --output LVDS1 --rate 59.9 --mode 1920x1080
The following WARNING is generated:
[ 50.018055] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.flags (expected 1, found 0)
[ 50.018060] ------------[ cut here ]------------
[ 50.018105] WARNING: CPU: 0 PID: 1819 at /home/arnd/Projekte/kernel/linux-2.6/drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state+0x59f/0xa30 [i915]()
[ 50.018106] pipe state doesn't match!
[ 50.018107] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables joydev deflate ctr twofish_generic twofish_x86_64_3way twofish_x86_64 twofish_common camellia_generic camellia_x86_64 bridge stp llc serpent_sse2_x86_64 serpent_generic ablk_helper cryptd xts lrw gf128mul glue_helper blowfish_generic blowfish_x86_64 blowfish_common cast5_generic cast_common des_generic cmac xcbc rmd160 sha512_generic dm_crypt crypto_null af_key xfrm_algo arc4 iwldvm mac80211 snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm dm_multipath snd_page_alloc snd_seq_midi snd_seq_midi_event uvcvideo videobuf2_vmalloc thinkpad_acpi videobuf2_memops snd_rawmidi videobuf2_core nvram videodev media snd_seq snd_seq_device snd_timer psmouse se
rio_raw q
cserial usb_wwan usbserial intel_ips tpm_tis snd btusb bnep iwlwifi lpc_ich rfcomm bluetooth cfg80211 soundcore binfmt_misc btrfs xor zlib_deflate raid6_pq libcrc32c mmc_block mxm_wmi firewire_ohci firewire_core crc_itu_t wmi i915 video i2c_algo_bit drm_kms_helper drm e1000e sdhci_pci ptp sdhci ahci pps_core libahci
[ 50.018156] CPU: 0 PID: 1819 Comm: Xorg Not tainted 3.11.0-rc5aha+ #3
[ 50.018157] Hardware name: LENOVO 4384GEG/4384GEG, BIOS 6MET86WW (1.46 ) 05/24/2011
[ 50.018159] 0000000000000009 ffff880223b39870 ffffffff81633b7d ffff880223b398b8
[ 50.018160] ffff880223b398a8 ffffffff8104a69c ffff8802322fc6d0 0000000000000001
[ 50.018162] ffff88022d99d000 ffff8802322fc000 ffff88022d99d478 ffff880223b39908
[ 50.018164] Call Trace:
[ 50.018172] [<ffffffff81633b7d>] dump_stack+0x45/0x56
[ 50.018177] [<ffffffff8104a69c>] warn_slowpath_common+0x8c/0xc0
[ 50.018178] [<ffffffff8104a78c>] warn_slowpath_fmt+0x4c/0x50
[ 50.018191] [<ffffffffa011c68f>] check_crtc_state+0x59f/0xa30 [i915]
[ 50.018204] [<ffffffffa0127a4d>] intel_modeset_check_state+0x2cd/0x750 [i915]
[ 50.018215] [<ffffffffa0127f65>] intel_set_mode+0x25/0x30 [i915]
[ 50.018225] [<ffffffffa0128722>] intel_crtc_set_config+0x7b2/0x990 [i915]
[ 50.018241] [<ffffffffa009181d>] drm_mode_set_config_internal+0x5d/0xe0 [drm]
[ 50.018250] [<ffffffffa0093cdb>] drm_mode_setcrtc+0xfb/0x620 [drm]
[ 50.018260] [<ffffffffa011dfb2>] ? intel_crtc_load_lut+0xd2/0x190 [i915]
[ 50.018267] [<ffffffffa00843c9>] drm_ioctl+0x539/0x670 [drm]
[ 50.018276] [<ffffffffa0093be0>] ? drm_mode_setplane+0x3b0/0x3b0 [drm]
[ 50.018282] [<ffffffff81189bdc>] do_vfs_ioctl+0x8c/0x4f0
[ 50.018284] [<ffffffff8117a2a1>] ? __sb_end_write+0x31/0x60
[ 50.018286] [<ffffffff811785be>] ? vfs_write+0x17e/0x1e0
[ 50.018288] [<ffffffff8118a0d1>] SyS_ioctl+0x91/0xb0
[ 50.018291] [<ffffffff81642642>] system_call_fastpath+0x16/0x1b
[ 50.018293] ---[ end trace d0d4c4e12439b0ce ]---
This is pretty reproducable on a newly booted system, and already present since
-rc1 or such. The update of the refresh rate seems to work nevertheless, though.
Best regards
Arnd
next reply other threads:[~2013-08-14 15:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-14 15:54 Arnd Hannemann [this message]
2013-08-14 15:54 ` 3.11.0-rc5: WARNING: at drivers/gpu/drm/i915/intel_display.c:8286 check_crtc_state Arnd Hannemann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520BA834.1020207@arndnet.de \
--to=arnd@arndnet.de \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.