From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91/dt: split sam9x5 peripheral definitions
Date: Mon, 19 Aug 2013 18:23:46 +0200 [thread overview]
Message-ID: <52124692.4080905@atmel.com> (raw)
In-Reply-To: <5203B7DA.8030706@overkiz.com>
On 08/08/2013 17:23, boris brezillon :
> Hello Jean-Christophe,
>
> On 08/08/2013 16:07, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 12:14 Wed 07 Aug , Boris BREZILLON wrote:
>>> This patch splits the sam9x5 peripheral definitions into:
>>> - a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
>>> - several optional peripheral definitions which will be included by specific
>>> sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
>>>
>>> This provides a better representation of the real hardware (drop unneeded
>>> dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
>>> peripheral id 25).
>> I really don't like this
>>
>> the mapping is soc specific (here familly) so I does not see any advantage
>> except move files so NO for me
> Let me explain in detail why I did that.
>
> This separation was part of the "at91 common clk" series and was here to
> avoid the
> definition of unavailable clocks or definition of clocks with the same
> id (which may result
> in bad clk registration).
> If we keep all the definitions in one .dtsi file (even the one which are
> not really available),
> I may need to add a new property to each peripheral (and system) clk
> node to specify the
> availabilty of the clock (something similar to 'status="disabled"' in
> device nodes).
This is indeed a pretty good argument.
I do think that we have to ask Mike Turquette to see if he already has
encountered such a case.
I must say that I was not in favor for this split because of readability
and dts/dtsi file organization (you know, the usual question: where the
hell this peripheral property is finally setup?).
But, if we really have to implement a new kind of property to tell if a
clock is actually present or not, I am in favor for reconsidering this
solution as it seems quite simple and self-explanatory...
> As explained to Thomas, I thought device tree was here to give a real
> description of the
> hardware parts (in case of sam9x5.dtsi the description of the common
> parts of sam9x5 SoC
> family).
> If you define peripherals that are not present in a SoC (lets say macb0
> for sam9g15) you break
> this rule.
Well, on the other hand, the status says "disabled", so we can imagine
that it has been disabled, from its birth, in hardware...
> I'm not telling I have the right approach here, I'm just trying to
> understand what should be done and
> what should not.
>
> Finally, I'd like to point that the memory footprint of the dtb file
> generated after this patch has been
> applied is bit smaller (even if it won't make a real difference):
>
> with this patch:
>
> 15937 arch/arm/boot/dts/at91-ariag25.dtb
> 15860 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16905 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16473 arch/arm/boot/dts/at91sam9g35ek.dtb
> 17341 arch/arm/boot/dts/at91sam9x25ek.dtb
> 16473 arch/arm/boot/dts/at91sam9x35ek.dtb
>
> without this patch:
>
> 16077 arch/arm/boot/dts/at91-ariag25.dtb
> 16824 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g35ek.dtb
> 15017 arch/arm/boot/dts/at91sam9m10g45ek.dtb
> 17145 arch/arm/boot/dts/at91sam9x25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9x35ek.dtb
okay, but difference in size are not impressive. But it is true that:
- it can grow a little if we switch LCD to full DT
- each bit saved can have an influence on boot time
but it will not be a decisive factor.
>> Best Regards,
>> J.
>>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>>> ---
>>> arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
>>> arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
>>> arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------
>>> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++
>>> 8 files changed, 158 insertions(+), 88 deletions(-)
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> index b4ec6fe..17b8799 100644
>>> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> @@ -7,6 +7,8 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9G25 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> index bebf9f5..e35c2fc 100644
>>> --- a/arch/arm/boot/dts/at91sam9g35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9G35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> index 49e94ab..c255421 100644
>>> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> @@ -7,6 +7,9 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> +#include "at91sam9x5_macb1.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9X25 SoC";
>>> @@ -22,27 +25,6 @@
>>> 0x80000000 0xfffd0000 0xb83fffff /* pioC */
>>> 0x003fffff 0x003f8000 0x00000000 /* pioD */
>>> >;
>>> -
>>> - macb1 {
>>> - pinctrl_macb1_rmii: macb1_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>>> - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>>> - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>>> - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>>> - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>>> - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>>> - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>>> - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>>> - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>>> - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> - };
>>> - };
>>> - };
>>> -
>>> - macb1: ethernet at f8030000 {
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> };
>>> };
>>> };
>>> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> index 1a3d525..8eac66c 100644
>>> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9X35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> index 57d45f5..05f4c74 100644
>>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> @@ -206,29 +206,6 @@
>>> };
>>> };
>>>
>>> - usart3 {
>>> - pinctrl_usart3: usart3-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_rts: usart3_rts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_cts: usart3_cts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_sck: usart3_sck-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> - };
>>> - };
>>> -
>>> uart0 {
>>> pinctrl_uart0: uart0-0 {
>>> atmel,pins =
>>> @@ -277,34 +254,6 @@
>>> };
>>> };
>>>
>>> - macb0 {
>>> - pinctrl_macb0_rmii: macb0_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>>> - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>>> - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>>> - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>>> - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>>> - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>>> - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>>> - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>>> - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>>> - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> - };
>>> -
>>> - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>>> - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>>> - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>>> - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>>> - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>>> - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>>> - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>>> - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> - };
>>> - };
>>> -
>>> mmc0 {
>>> pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
>>> atmel,pins =
>>> @@ -605,22 +554,6 @@
>>> status = "disabled";
>>> };
>>>
>>> - macb0: ethernet at f802c000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf802c000 0x100>;
>>> - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - macb1: ethernet at f8030000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf8030000 0x100>;
>>> - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - status = "disabled";
>>> - };
>>> -
>>> i2c0: i2c at f8010000 {
>>> compatible = "atmel,at91sam9x5-i2c";
>>> reg = <0xf8010000 0x100>;
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> new file mode 100644
>>> index 0000000..55731ff
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> @@ -0,0 +1,56 @@
>>> +/*
>>> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
>>> + * Ethernet interface.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + macb0 {
>>> + pinctrl_macb0_rmii: macb0_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>>> + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>>> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>>> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>>> + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>>> + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>>> + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>>> + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>>> + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>>> + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> + };
>>> +
>>> + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>>> + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>>> + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>>> + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>>> + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>>> + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>>> + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>>> + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb0: ethernet at f802c000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf802c000 0x100>;
>>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> new file mode 100644
>>> index 0000000..77425a6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> @@ -0,0 +1,44 @@
>>> +/*
>>> + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
>>> + * Ethernet interfaces.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + macb1 {
>>> + pinctrl_macb1_rmii: macb1_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>>> + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>>> + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>>> + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>>> + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>>> + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>>> + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>>> + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>>> + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>>> + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb1: ethernet at f8030000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf8030000 0x100>;
>>> + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> new file mode 100644
>>> index 0000000..5589579
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> @@ -0,0 +1,51 @@
>>> +/*
>>> + * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
>>> + * 4 USART.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl at fffff400 {
>>> + usart3 {
>>> + pinctrl_usart3: usart3-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_rts: usart3_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_cts: usart3_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_sck: usart3_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + usart3: serial at f8028000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xf8028000 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart3>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> --
>>> 1.7.9.5
>>>
>
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: boris brezillon <b.brezillon@overkiz.com>,
"Jean-Christophe PLAGNIOL-VILLARD" <plagnioj@jcrosoft.com>,
Mike Turquette <mturquette@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>,
Linus Walleij <linus.walleij@linaro.org>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Richard Genoud <richard.genoud@gmail.com>,
Mark Brown <broonie@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH] ARM: at91/dt: split sam9x5 peripheral definitions
Date: Mon, 19 Aug 2013 18:23:46 +0200 [thread overview]
Message-ID: <52124692.4080905@atmel.com> (raw)
In-Reply-To: <5203B7DA.8030706@overkiz.com>
On 08/08/2013 17:23, boris brezillon :
> Hello Jean-Christophe,
>
> On 08/08/2013 16:07, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 12:14 Wed 07 Aug , Boris BREZILLON wrote:
>>> This patch splits the sam9x5 peripheral definitions into:
>>> - a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
>>> - several optional peripheral definitions which will be included by specific
>>> sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
>>>
>>> This provides a better representation of the real hardware (drop unneeded
>>> dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
>>> peripheral id 25).
>> I really don't like this
>>
>> the mapping is soc specific (here familly) so I does not see any advantage
>> except move files so NO for me
> Let me explain in detail why I did that.
>
> This separation was part of the "at91 common clk" series and was here to
> avoid the
> definition of unavailable clocks or definition of clocks with the same
> id (which may result
> in bad clk registration).
> If we keep all the definitions in one .dtsi file (even the one which are
> not really available),
> I may need to add a new property to each peripheral (and system) clk
> node to specify the
> availabilty of the clock (something similar to 'status="disabled"' in
> device nodes).
This is indeed a pretty good argument.
I do think that we have to ask Mike Turquette to see if he already has
encountered such a case.
I must say that I was not in favor for this split because of readability
and dts/dtsi file organization (you know, the usual question: where the
hell this peripheral property is finally setup?).
But, if we really have to implement a new kind of property to tell if a
clock is actually present or not, I am in favor for reconsidering this
solution as it seems quite simple and self-explanatory...
> As explained to Thomas, I thought device tree was here to give a real
> description of the
> hardware parts (in case of sam9x5.dtsi the description of the common
> parts of sam9x5 SoC
> family).
> If you define peripherals that are not present in a SoC (lets say macb0
> for sam9g15) you break
> this rule.
Well, on the other hand, the status says "disabled", so we can imagine
that it has been disabled, from its birth, in hardware...
> I'm not telling I have the right approach here, I'm just trying to
> understand what should be done and
> what should not.
>
> Finally, I'd like to point that the memory footprint of the dtb file
> generated after this patch has been
> applied is bit smaller (even if it won't make a real difference):
>
> with this patch:
>
> 15937 arch/arm/boot/dts/at91-ariag25.dtb
> 15860 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16905 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16473 arch/arm/boot/dts/at91sam9g35ek.dtb
> 17341 arch/arm/boot/dts/at91sam9x25ek.dtb
> 16473 arch/arm/boot/dts/at91sam9x35ek.dtb
>
> without this patch:
>
> 16077 arch/arm/boot/dts/at91-ariag25.dtb
> 16824 arch/arm/boot/dts/at91sam9g15ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9g35ek.dtb
> 15017 arch/arm/boot/dts/at91sam9m10g45ek.dtb
> 17145 arch/arm/boot/dts/at91sam9x25ek.dtb
> 16849 arch/arm/boot/dts/at91sam9x35ek.dtb
okay, but difference in size are not impressive. But it is true that:
- it can grow a little if we switch LCD to full DT
- each bit saved can have an influence on boot time
but it will not be a decisive factor.
>> Best Regards,
>> J.
>>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
>>> ---
>>> arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
>>> arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
>>> arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------
>>> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
>>> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++
>>> 8 files changed, 158 insertions(+), 88 deletions(-)
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> index b4ec6fe..17b8799 100644
>>> --- a/arch/arm/boot/dts/at91sam9g25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g25.dtsi
>>> @@ -7,6 +7,8 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9G25 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> index bebf9f5..e35c2fc 100644
>>> --- a/arch/arm/boot/dts/at91sam9g35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9G35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> index 49e94ab..c255421 100644
>>> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
>>> @@ -7,6 +7,9 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_usart3.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>> +#include "at91sam9x5_macb1.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9X25 SoC";
>>> @@ -22,27 +25,6 @@
>>> 0x80000000 0xfffd0000 0xb83fffff /* pioC */
>>> 0x003fffff 0x003f8000 0x00000000 /* pioD */
>>> >;
>>> -
>>> - macb1 {
>>> - pinctrl_macb1_rmii: macb1_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>>> - AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>>> - AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>>> - AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>>> - AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>>> - AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>>> - AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>>> - AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>>> - AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>>> - AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> - };
>>> - };
>>> - };
>>> -
>>> - macb1: ethernet@f8030000 {
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> };
>>> };
>>> };
>>> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> index 1a3d525..8eac66c 100644
>>> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
>>> @@ -7,6 +7,7 @@
>>> */
>>>
>>> #include "at91sam9x5.dtsi"
>>> +#include "at91sam9x5_macb0.dtsi"
>>>
>>> / {
>>> model = "Atmel AT91SAM9X35 SoC";
>>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> index 57d45f5..05f4c74 100644
>>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>>> @@ -206,29 +206,6 @@
>>> };
>>> };
>>>
>>> - usart3 {
>>> - pinctrl_usart3: usart3-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_rts: usart3_rts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_cts: usart3_cts-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> - };
>>> -
>>> - pinctrl_usart3_sck: usart3_sck-0 {
>>> - atmel,pins =
>>> - <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> - };
>>> - };
>>> -
>>> uart0 {
>>> pinctrl_uart0: uart0-0 {
>>> atmel,pins =
>>> @@ -277,34 +254,6 @@
>>> };
>>> };
>>>
>>> - macb0 {
>>> - pinctrl_macb0_rmii: macb0_rmii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>>> - AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>>> - AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>>> - AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>>> - AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>>> - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>>> - AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>>> - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>>> - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>>> - AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> - };
>>> -
>>> - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> - atmel,pins =
>>> - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>>> - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>>> - AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>>> - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>>> - AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>>> - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>>> - AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>>> - AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> - };
>>> - };
>>> -
>>> mmc0 {
>>> pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
>>> atmel,pins =
>>> @@ -605,22 +554,6 @@
>>> status = "disabled";
>>> };
>>>
>>> - macb0: ethernet@f802c000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf802c000 0x100>;
>>> - interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - pinctrl-names = "default";
>>> - pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> - status = "disabled";
>>> - };
>>> -
>>> - macb1: ethernet@f8030000 {
>>> - compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> - reg = <0xf8030000 0x100>;
>>> - interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> - status = "disabled";
>>> - };
>>> -
>>> i2c0: i2c@f8010000 {
>>> compatible = "atmel,at91sam9x5-i2c";
>>> reg = <0xf8010000 0x100>;
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> new file mode 100644
>>> index 0000000..55731ff
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
>>> @@ -0,0 +1,56 @@
>>> +/*
>>> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
>>> + * Ethernet interface.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl@fffff400 {
>>> + macb0 {
>>> + pinctrl_macb0_rmii: macb0_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
>>> + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
>>> + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
>>> + AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
>>> + AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
>>> + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
>>> + AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
>>> + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
>>> + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
>>> + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
>>> + };
>>> +
>>> + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB8 periph A */
>>> + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A */
>>> + AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */
>>> + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A */
>>> + AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
>>> + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB15 periph A */
>>> + AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB16 periph A */
>>> + AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB17 periph A */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb0: ethernet@f802c000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf802c000 0x100>;
>>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb0_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> new file mode 100644
>>> index 0000000..77425a6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
>>> @@ -0,0 +1,44 @@
>>> +/*
>>> + * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
>>> + * Ethernet interfaces.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl@fffff400 {
>>> + macb1 {
>>> + pinctrl_macb1_rmii: macb1_rmii-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC16 periph B */
>>> + AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC18 periph B */
>>> + AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC19 periph B */
>>> + AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC20 periph B */
>>> + AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC21 periph B */
>>> + AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC27 periph B */
>>> + AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC28 periph B */
>>> + AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC29 periph B */
>>> + AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC30 periph B */
>>> + AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC31 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + macb1: ethernet@f8030000 {
>>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>>> + reg = <0xf8030000 0x100>;
>>> + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_macb1_rmii>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> new file mode 100644
>>> index 0000000..5589579
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
>>> @@ -0,0 +1,51 @@
>>> +/*
>>> + * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
>>> + * 4 USART.
>>> + *
>>> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
>>> + *
>>> + * Licensed under GPLv2.
>>> + */
>>> +
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +/ {
>>> + ahb {
>>> + apb {
>>> + pinctrl@fffff400 {
>>> + usart3 {
>>> + pinctrl_usart3: usart3-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
>>> + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_rts: usart3_rts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_cts: usart3_cts-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
>>> + };
>>> +
>>> + pinctrl_usart3_sck: usart3_sck-0 {
>>> + atmel,pins =
>>> + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
>>> + };
>>> + };
>>> + };
>>> +
>>> + usart3: serial@f8028000 {
>>> + compatible = "atmel,at91sam9260-usart";
>>> + reg = <0xf8028000 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_usart3>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> + };
>>> +};
>>> --
>>> 1.7.9.5
>>>
>
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-08-19 16:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-07 10:14 [PATCH] ARM: at91/dt: split sam9x5 peripheral definitions Boris BREZILLON
2013-08-07 10:14 ` Boris BREZILLON
2013-08-07 10:38 ` Richard Genoud
2013-08-07 10:38 ` Richard Genoud
2013-08-07 10:55 ` boris brezillon
2013-08-07 10:55 ` boris brezillon
2013-08-07 10:59 ` Richard Genoud
2013-08-07 10:59 ` Richard Genoud
2013-08-07 16:08 ` Thomas Petazzoni
2013-08-07 16:08 ` Thomas Petazzoni
2013-08-07 17:28 ` boris brezillon
2013-08-07 17:28 ` boris brezillon
2013-08-08 14:07 ` Jean-Christophe PLAGNIOL-VILLARD
2013-08-08 14:07 ` Jean-Christophe PLAGNIOL-VILLARD
2013-08-08 15:23 ` boris brezillon
2013-08-08 15:23 ` boris brezillon
2013-08-08 15:52 ` boris brezillon
2013-08-08 15:52 ` boris brezillon
2013-08-19 16:23 ` Nicolas Ferre [this message]
2013-08-19 16:23 ` Nicolas Ferre
2013-08-19 22:37 ` Mike Turquette
2013-08-19 22:37 ` Mike Turquette
2013-08-20 6:00 ` b.brezillon at overkiz.com
2013-08-20 6:00 ` b.brezillon
2013-08-20 22:36 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52124692.4080905@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.